Tender For Modernization/Upgradation Of Existing Parks/Green Belts.Sh: Supply Installation And Testing Commissioning Of 4 Mtr. Decorative G.I. Pole Alongwith 60 Watt Led Post Top And Accessories Including Panel Etc. At Dsitrict Park Pit Ura Under Hor
Tender Value
15.35 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
0 days left
EMD
30700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Modernization/Upgradation Of Existing Parks/Green Belts.Sh: Supply Installation And Testing Commissioning Of 4 Mtr. Decorative G.I. Pole Alongwith 60 Watt Led Post Top And Accessories Including Panel Etc. At Dsitrict Park Pit Ura Under Horticulture Zone.
BOQ
| Sl. No. | Item Description |
| 1 | Supply, Erection , Testing and Commissioning of 4 mtr high Decorative Pole made out of GI tube 'B' class confirming to IS:1239 duly welded with MS base plate of size 250x250x10 mm and suitable mounting arrangement for fixing Post top light luminaire. The pole shall be fabricated in different sections (Bottom section-1000x140x4.8 mm, Upper section- 3000x76x3.6 mm) having Cast aluminium Embellishment as per Drawing no.1 enclosed with suitable size integral service connection box built in the pole and cover the same with circular strip welded as approved by Engineer-in-charge complete as required having 1 no. 6 Amp 'c' series SPMCB and 1 no. 25 Amp heavy duty four way connector. The pole shall primer coated and painted with Polyurethane paint in colour approved by Engineer-in-charge finishing etc. complete as required. |
| 2 | Providing and laying in position 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) reinforced cement concrete foundation of size 450 mm x 450 mm x 1200 mm deep (800 mm below ground level and 400 mm above ground level) including excavation of earth, refilling, providing, cutting, bending and placing in position, reinforcement of cold twisted bars of 12mm. dia-1200mm long (approx) -8Nos, and reinforcement ring of cold twisted bar of 8mm dia -1400mm long (approx) -6 nos, (with suitable spacing) including centering & shuttering as required with providing, fixing and positioning of one set of foundation bolts comprising of 4 nos., 16 mm dia, 750 mm long J-Type MS bolts (Threaded portion shall be galvanized) along with 3 nos. GI nuts and 2 nos. GI washers etc. per bolt and 1 no. anchor plate (3mm thick) of suitable size and providing 63 mm.(O.D) DWC pipe ISI marked for cable entry & exit etc. complete as required. |
| 3 | Supply, installation, testing and commissioning of 60 watt LED post top Luminaire made out of circular die casted aluminium body with three nos. die casted aluminium arms likely similar in the shape as per Drawing no.2 enclosed with polycarbonate clear/opal diffuser for glare free lighting .MCPCB having high lumen LED's are mounted on aluminium heat sinks. CRI>70,CCT-3000K, Life span of LED's ≥50,000 Hrs, sytem efficacy (L/W) ≥ 100L/W, operating Voltage -100-270V, PF≥0.95 , Surge protection -10KV, IP Protection -IP ≥65, IK≥07. Make of LED- Cree/Philips/Osram/ Nichia, THD< 10% etc. complete as required. |
| 4 | Supplying of following sizes of XLPE insulated PVC sheathed Al. cond. Armoured power cable of 1.1 KV grade including connection, testing etc. as required. a) 2C x 16 sq. mm |
| 5 | b) 4C X 25 sq. mm |
| 6 | Supplying & drawing following size FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required.a)3 x 1.5 sq. mm |
| 7 | Supplying and Laying of following size DWC HDPE Pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS: 14930, Part-II complete with fitting and cutting, jointing etc. direct-in-ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.a)63 mm dia. (OD-63 mm & ID-51 mm nominal) |
| 8 | Laying of one number PVC Insulated and PVC Sheathed/XLPE Power Cable of 1.1 KV grade of following size in the existing RCC/HUME/METAL pipe as required.Up to 35 sq. mm |
| 9 | Providing and Fixing 6 SWG dia. GI wire on surface or in recess for loop earthing along with existing surface/recessed conduit/sub-main wiring/cable as required. |
| 10 | Supplying, Installation, testing and commissioning of floor mounted LT feeder pillar cubical type double door of size 1000 mm x 900mm x 300 mm deep duly compartmentalized and with general arrangement made out of 2mm thick CRCA sheet having hinged gasket cover and screwed knobs with double locking arrangement and rain protection covers 100 mm and supported with MS angle iron legs and bottom frame of size 35mm x 35mm x 5mm x 1mtr. long grouted with 1:3:6 CC foundation and should be 0.7 mtr. above ground level. Legs should be covered with brick walls,duly 1:4 cement plaster, connections, inter connections with suitable size of FRLS PVC insulated copper conductor using thimbles,ferrules wherever required, painting, numbering including supply and fixing of following accessories complete etc. as required (as per drawing approved by Engineer-in-charge) . (a)100 Amps.30KA Four Pole MCB ('C'-Series), ----1 No.(b)16 Amps. SP MCB ('C'-Series), 10 kA------ 6Nos(c)6A-32 A DP MCB ('C'-Series),10KA ------1No.(d) Analogue Timer switch for daily operation and toggle switch for auto/manual --1 No. (e) 32 Amps. AC-3, 3 pole power contactor -----1 No. (f) 30 Ampere 4 way neutral link/connector ------2 Nos. (g) Voltmeter (0-500 Volt) 96mm X 96mm square type with selector switch ---1 No (h) Ammeter (0-30 A) 96mm X 96mm square type----1 no.(i) Phase Indicating Lamp Set with fuses ----1 Set (j) Danger notice plate -----1 No (k) AI. Bus Bar 100 amp. 4 strip, 300 mm long with sleeve and nut bolts-----1 Set. (l) Lifting hook on the top of panel board and lighting arrangement inside the feeder pillar- 1 No. |
| 11 | Supplying, fabrication and installation of wire mesh protection frame for existing feeder pillar made out of 10 SWG MS wire mesh (75mm x 25mm rectangle nominal) of following sizes with angle iron base frame 40 mm x 40 mm x 6 mm angle iron and with MS strip support of size 35 mm x 6 mm and 0.5 mtr. long leg support of same angle as per drawing including providing of suitable size of door with supply & fixing of godown lock including locking arrangment, painting and grouting of angle iron frame with legs in CC (1:2:4) foundation etc. as approved by Engineer-in-charge etc. complete as required.a) 1.5 mtr (W) x 1.00 mtr(D) x 2.00 mtr. (Height). |
| 12 | Earthing with GI Earth Pipe 4.5 meter long, 40 mm dia. including accessories, and Providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. |
| 13 | Providing and Fixing 25 mm x 5 mm GI Strip on surface or in recess for connection etc. as required. |
| 14 | Providing& laying of DWC HDPE pipe of size 63 mm outer dia, by trenchless technology with no dig method by making bore hole in horizontal direction across the road/path with boring equipment i/c jointing / cleaning of pipes, excavation of pits of required size & depth etc. complete as required. |
| 15 | Shifting of existing 6mtr./4 mtr. Pole by dismentaling existing foundation i/c excavation of earth upto suitable depth and refilling the same & shifting it to suitable location and installation the same and making connection testing etc complete as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender