Tender For Development Of Cssd At 100 Bedded Hospital, Ripans
Tender Value
41.98 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
6 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Aizawl → Mizoram
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Cssd At 100 Bedded Hospital, Ripans
BOQ
| Sl. No. | Item Description |
| 1 | First class brickwork in superstructure above plinth level up to floor V level in: a) in cement mortar 1: 3 ( 1 cement : 3 coarse sand ): Internal wall |
| 2 | 15mm cement plaster 1 : 3 (1 cement : 3 fine sand). |
| 3 | Providing and fixing Its quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to e specified by the manufacturer),of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineering- Charge, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1cemeny :3 coarse sand) and jointing with cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 4 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS: 733 and IS: 1285, anodised transparent or dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15), fixed with all plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately). For fixed portion. (c) Powder coated: Internal Partition |
| 5 | Installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding 4mm thick, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. complete. |
| 6 | Providing and fixing anodised aluminium work for doors, windows, ventilators and partitions with extruded built up standard sections/ other sections of approved make conforming to IS : 733 and IS : 1285 fixing with dash fasteners of required Dia and size, including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/ neoprene gaskets etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing /panelling, CP brass /stainless steel screws all complete including fixing of glasses but excluding cost of glasses. c) Powder coated |
| 7 | Installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding 4mm thick, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. complete. |
| 8 | Supplying of glass panes at site. (b) 5mm thick plate sheet glass. |
| 9 | Supplying and laying high-performance, medical-grade Homogeneous Vinyl Sheet Flooring, possessing a minimum 2.0mm thickness, a dense single-layer composition, and a factory-applied Polyurethane (PUR) reinforced surface treatment with a Group T wear resistance rating. The material must be non-porous, bacteria-static, fungistatic, stain- resistant, and capable of withstanding constant exposure to hospital chemical detergents, absolute alcohol, and enzymatic cleaning agents. Material must be shipped in rolls of 2-meter width to minimize seams. (Complies with EN ISO 10581 / QCI) |
| 10 | Providing and fixing readymade door (Masonite or equivalent quality) including M.S. butt hinges with necessary screws complete. b) 35mm Readymade Teak Veneer Door |
| 11 | Coloured polished granite slab of size not less than 1200mm x 600mm x 20mm thick in flooring, treads of steps and landings laid over 20mm (average) thick base of cement mortar 1:4 and jointed with white cement slurry including rubbing and polishing complete. (b) General red |
| 12 | Providing and fixing G.I steel frame works for ceiling lining consisting of battens 50x25mm fixed over plugs embedded in wall with necessary screws, etc. complete. |
| 13 | Providing and fixing perforated acoustical panel Ceiling of approved quality including fixing to frames with screws etc. complete. (Installation in wood batten system or steel keel system Frame work to be paid separately). |
| 14 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold-water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall c) 25mm Dia nominal bore |
| 15 | f) 50mm Dia nominal bore |
| 16 | Making connection of Astral CPVC pipes distribution branch by providing and fixing Elbow 90o with jointing, testing complete including cutting and making good etc. c) 25mm Dia |
| 17 | f) 50mm Dia nominal bore |
| 18 | Making connection of Astral CPVC pipes distribution branch by providing and fixing Elbow 45o with jointing, testing complete including cutting and making good etc. c) 25mm Dia |
| 19 | f) 50mm Dia nominal bore |
| 20 | Providing and fixing one piece construction of vitreous China squatting plate urinal of Parry ware/ Hind ware/ Cera and equivalent make with an internal longitudinal flushing pipe, Flush valve with fitting, R.S. or G.I. flushing pipe for back and front flush with standard spreaders pipe with fittings, G.I. clamps white vitreous corners and angles set in vent cement standard urinal C.I. trap 65mm dia. with vent arm and outlet grating and coupling in C.P. brass complete including painting of fittings, cutting and making good the walls and floors where required. ii) Pastel |
| 21 | Providing and fixing Health faucet with flexible tube up to 1 metre long and holder of quality and make as approved by Engineer - in -charge. |
| 22 | Providing and fixing G.I. pipe complete with G.I. fitting including trenching and refilling etc. (external work). (a) 15mm Dia nominal bore: |
| 23 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work). (a) 15 mm nominal bore |
| 24 | Painting G.I pipes and fittings with white paint over ready mixed priming coat, both of approved quality. (a) 15mm Dia pipe |
| 25 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete: (a) 15mm nominal bore |
| 26 | Providing and fixing brass bib cock of approved quality. (c) 25mm nominal bore Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender