Tender For Laying Sewage Pumping Main Line From Ismayilpuram Sps To Sandhaipettai Mps In South River Road In Ward No. 43
Tender Value
96.44 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
8 days left
EMD
96444
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Madurai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Laying Sewage Pumping Main Line From Ismayilpuram Sps To Sandhaipettai Mps In South River Road In Ward No. 43
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling RCC Road Surface etc., complete |
| 2 | Earth work excavation for foundation & depositing on bank with an initial lead of 10m & lift of 2 m for depths in soft disintegrated Rock when required, barricading with safety lamps etc all complete as per standard specification as directed by the Departmental EngineerUpto 2.00 |
| 3 | Dewatering using diesel engine pumpset including Hire charges, cost of Diesel, Engine oil, pump operator, labour charges, conveyance of pumpset and fuel to site and back, loading, unloading and any other incidental charges etc., complete.Hire charges for Diesel Pump set For 5 HP |
| 4 | Supplying, Laying and Joining of CI Pipe with socket and spigot ends for A Class as per IS 1536/2001 etc complete as directed by Engineer-in-charge250mm CI A Class Pipe - Depth upto 2.00m |
| 5 | Supplying of CI Specials with socket and spigot ends for as per IS 1538/1993 etc complete as directed by Engineer-in-charge |
| 6 | Lowering of C.I Pipes and specials in the trenches and laying to proper grade and alignment and as directed by the TWAD Officers. |
| 7 | Jointing C.I/ D.I-S/S pipes and specials with rubber gaskets (tyton joint) including cost of lubricants. (including cost of jointing materials) |
| 8 | Testing of M.S. / C.I. / D.I / P.V.C. / H.D.P.E / pipes wit hydraulic testing equipment by filling with water (including cost of water @ Rs. 60/KL) and testing to recommended pressure in convenient stretches and attending the bursts if any occured during the test, excluding the cost of pipes but including other incidential and operational charges etc., complete for the following diametres of pipes |
| 9 | Supply of C.I. Double Air Valve As Per ISI 14845/2000 and with 5 years warranty etc complete 80mm Air Valve |
| 10 | Supply and delivery of DI D/F Gate (sluice) valves (soft seated) resilient seated soft sealing Gate Valves (Sluice Valves) with body Bonnet of Ductile cast iron of Grade GGG 40 or GGG 50, Wedge fully rubber lined with EPDM replaceable spindle nut without gland packing and with 3 O- Ring protection on the shaft and seals of NBR and the valves should be of Vacuum tight and 100% leak proof with face to face dimensions as per BS 5163-89/ISI 14846-2000/DIN 3202 F4. All the valves should be with electrostatic powder coating both inside and out side with pocket less straight through body passage. All the valves are to be compatible for buried application with pressure rating PN 10/16 and with 5 years warranty250mm Sluice Valve |
| 11 | Manufacture, Supply and Delivery of DI D/F Slanted seat Swing Check Valve. Body of ductile cast iron GGG 40/45/50 or equivalent grade and disc of ductile cast iron GGG 40/45/50 with fully encapsulated EPDM rubber, where both faces can be used. Electrostatic epoxy powder/ liquid coating (EP-P) inside and outside color blue RAL5005 with minimum coating thickness of 250 microns. The EPDM rubber and Epoxy powder should be approved by W 270. (EP-P) it is a resi coat powder approved for drinking water application, applied through fusion bonding process by dipping the shot-blasted casted components heated upto 200 deg C). Face to face dimensions as per EN558-1, series 48 and flange connections as per EN 1092-2 / IS 1538.250mm NRV Valve |
| 12 | Refilling the trenches with suitable excavated earth available along the alignment after the pipes & specials are laid, jointed & tested in layers & watering, ramming & consolidation directed by the Engineer-in-Charge. |
| 13 | Disposal of surplus earth including loading and conveyance within a distance of 5 km (basic cost of earth is zero) including loading charges and Conveyance Charges of 5 kms distance. |
| 14 | Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 15 | Plain Cement Concrete 1:1.5:3 (One part of Cement, one and half part of Crushed Sand (M- Sand), three coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification |
| 16 | Add GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender