Tender For Construction Of 02 Nos Wash Room And Maintenance Of Central Store At Bishalgarh Under Supdt. Of Fisheries Bishalgarh
Tender Value
5.97 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
10 days left
EMD
11955
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sepahijala → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 02 Nos Wash Room And Maintenance Of Central Store At Bishalgarh Under Supdt. Of Fisheries Bishalgarh
BOQ
| Sl. No. | Item Description |
| 1 | Item Description |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. -All kinds of soil |
| 3 | Supplying and filling in plinth, under floor, foundations etc.with sand (fine) from local quarry with all lifts includingspreading in horizontal layers, watering, grading torequired slope, ramming, consolidating and compactingeach layer by using plate compactor or by any suitablemethod complete. |
| 4 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering --All work upto plinth level: 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brickaggregate 40 mm nominal size) |
| 5 | Providing and laying in position specified grade ofreinforced cement concrete excluding the cost ofcentring, shuttering, finishing and reinforcement--All work upto plinth level. 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brickaggregate 20 mm nominal size) |
| 6 | Reinforced cement concrete work in beams, suspendedfloors, roofs having slope upto 15° landings, balconies,shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases upto floor five levelexcluding the cost of centring, shuttering, finishing and reinforcement- 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brickaggregate 20 mm nominal size) |
| 7 | Centering shuttering including struttings, propping etc.and removal of form work for: Columns, Pillars, Piers, Abutments, Posts and Struts withwooden plank |
| 8 | Centering shuttering including struttings, propping etc.and removal of form work for: Suspended floors, roofs, landings, balconies and accessplatform with timber planks |
| 9 | Reinforced cement concrete work in walls (anythickness), including attached pilasters, buttresses,plinth and skirting courses, fillets, columns, pillars,piers, abutments, posts and struts etc. upto floor fivelevel excluding cost of centring, shuttering, finishingand reinforcement- 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brickaggregate 20 mm nominal size) |
| 10 | Centering shuttering including struttings, propping etc.and removal of form work for: Lintels, beams, plinth beams, girders, bressumers andcantilevers with wooden plank |
| 11 | Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding allcomplete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D ormore |
| 12 | First class brick work in foundation and plinthincluding cost of all materials as required complete: In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 13 | Half brickmasonryworkwith first class bricks insuperstructureuptofloor five level includingcostofall materials as required complete: In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 14 | First classbrickworkinsuperstructureaboveplinthlevel & upto floor-five level including cost of allmaterials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 15 | Providing and fixing aluminium work for doors,windows, ventilators and partitions with extruded builtup standard tubular sections/ appropriate Z sectionsand other sections of approved make conforming toIS: 733 and IS : 1285, fixing with dash fasteners ofrequired dia and size, including necessary filling up ofgaps at junctions, i.e. at top, bottom and sides withrequired EPDM rubber/neoprene gasket etc. Aluminiumsections shall be smooth, rust free, straight, mitred andjointed mechanically wherever required including cleatangle, aluminium snap beading for glazing / paneling,C.P. brass / stainless steel screws, all complete as perarchitectural drawing and the direction ofEngineerincharge. (Glazing and paneling and dashfasteners to be paid for separately) : For fixed portion of approved quality:- Anodised aluminium (anodised transparent or dyed torequired shade according to IS: 1868, Minimum anodiccoating of grade AC 15). |
| 16 | Providing and fixing aluminium work for doors,windows, ventilators and partitions with extruded builtup standard tubular sections/ appropriate Z sectionsand other sections of approved make conforming toIS: 733 and IS : 1285, fixing with dash fasteners ofrequired dia and size, including necessary filling up ofgaps at junctions, i.e. at top, bottom and sides withrequired EPDM rubber/neoprene gasket etc. Aluminiumsections shall be smooth, rust free, straight, mitred andjointed mechanically wherever required including cleatangle, aluminium snap beading for glazing / paneling,C.P. brass / stainless steel screws, all complete as perarchitectural drawing and the direction ofEngineerincharge. (Glazing and paneling and dashfasteners to be paid for separately) : For fixed portion of approved quality:- Anodised aluminium (anodised transparent or dyed torequired shade according to IS: 1868, Minimum anodiccoating of grade AC 15). |
| 17 | Providing and fixing 12 mm thick prelaminated threelayer medium density (exterior grade ) particle boardgrade-I, type II conforming to IS : 12823 bonded withphenol formaldehyde synthetic resin, of approved brandand manufacture in panelling fixed in aluminium doors,windows, shutters and partition frames with C.P. brass /stainless steel screws all complete as per architecturaldrawing and the direction of Engineer-in-charge :- Prelaminated particle board of approved quality withdecorative lamination on one side and balancing laminationon other side. |
| 18 | 12 mm cement plaster of mix. Cement mortar 1:4 (1 cement : 4 fine sand) |
| 19 | 6 mm cement plaster of mix : Cement mortar 1:3 (1 cement : 3 fine sand) |
| 20 | Neat cement punning. |
| 21 | Providing and laying 1st class quality ceramic floor tilesin different sizes (thickness to be specified by themanufacturer) of 1st quality conforming to IS : 156222017 of approved make in colours such as White, Ivory,Grey, Fume Red Brown, laid over 20 mm thick cementmortar 1:4 (1 cement : 4 fine sand), Jointing with greycement slurry @ 3.3 kg/sqm including pointing the jointswith white cement and matching pigment etc. allcomplete as per direction of the Engineer in-charge. Mat Finish Tiles/ Anti-skid Tiles/ Glossy Tiles 300 mm x 300 mm in all shades and designs |
| 22 | Providing and fixing 1st class quality ceramic glazed walltiles conforming to IS : 15622- 2017 (thickness to bespecified by the manufacturer) of approved make in allcolours, shades of any size as approved by Engineer-incharge in skirting, risers of steps and dados, laid over 12mm thick bed of cement mortar 1 : 3 (1 cement : 3 finesand) jointed with ordinary cement slurry includingpointing with white cement mixed with pigment ofmatching shade etc. all complete as per direction of theEngineer in-charge. 450 mm X 300 mm in all shades and design |
| 23 | Providing and fixing white vitreous china pedestaltype water closet (European type W.C. pan) with seatand lid, 10 litre low level white P.V.C. flushingcistern with manually controlled device (handle lever),conforming to IS : 7231, with all fittings and fixturescomplete including cutting and making good the wallsand floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 24 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps,32 mm C.P. brass waste ofstandard pattern, including painting of fittings andbrackets, cutting and making good the wallswherever require : White Vitreous China Wash basin size 550x400 mm with apair of 15 mm C.P. brass pillar taps. |
| 25 | Providing and fixing white vitreous china squatting plateurinal with integral rim longitudinal flush pipe. |
| 26 | Providing and fixing 600x450 mm bevelled edge mirrorof superior glass (of approved quality) complete with 6mmthick hard board ground fixed to wooden cleats withC.P. brass screws and washers complete. |
| 27 | Providing and fixing 600x120x5mm glass shelf withedges round of supported on anodised aluminium angleframe with C.P. brass brackets and guard rail completefixed with 40 mm long screws, rawl plugs etc., complete. |
| 28 | Providing and fixing PTMT towel rail complete withbrackets fixed to wooden cleats with CP brass screwswith concealed fitting arrangement of approved qualityand colour. 450mm long towel rail with total length of 495mm, 78mmwide and effective height of 88mm, weighing not less than170gms. |
| 29 | Providing and fixing on wall face unplasticised RigidPVC soil, waste & vent pipes (working pressure 4 kg /cm2) conforming to IS : 13592 Type A includingjointing with seal ring conforming to IS : 5382leaving 10 mm gap for thermal expansion: Single socketed pipe - 75 mm OD |
| 30 | Providing and fixing on wall face unplasticised RigidPVC soil, waste & vent pipes (working pressure 4 kg /cm2) conforming to IS : 13592 Type A includingjointing with seal ring conforming to IS : 5382leaving 10 mm gap for thermal expansion: Single socketed pipe - 110 mm OD |
| 31 | Providing and fixing on wall face unplasticised- PVCmoulded fittings/ accessories for unplasticised RigidPVC soil, waste & vent pipes conforming to IS : 13592Type A including jointing with seal ring conformingto IS : 5382 leaving 10 mm gap for thermal expansion: Coupler 75 mm |
| 32 | Providing and fixing on wall face unplasticised- PVCmoulded fittings/ accessories for unplasticised RigidPVC soil, waste & vent pipes conforming to IS : 13592Type A including jointing with seal ring conformingto IS : 5382 leaving 10 mm gap for thermal expansion: Coupler 110 mm |
| 33 | Providing and fixing on wall face unplasticised- PVCmoulded fittings/ accessories for unplasticised RigidPVC soil, waste & vent pipes conforming to IS : 13592Type A including jointing with seal ring conformingto IS : 5382 leaving 10 mm gap for thermal expansion: Bend 87.5° 75mm |
| 34 | Providing and fixing on wall face unplasticised- PVCmoulded fittings/ accessories for unplasticised RigidPVC soil, waste & vent pipes conforming to IS : 13592Type A including jointing with seal ring conformingto IS : 5382 leaving 10 mm gap for thermal expansion: Bend 87.5° 110 mm |
| 35 | Providing and fixing 25mm x 1.40 mm clips made out ofaluminium strip of approved design to unplasticisedPVC soil, waste & vent pipes by means of Plastic WallPlugs fitted in the brick work/R.C.C work by drillingwith the help of mechaine and screwed with M.S. screwsof required length and making good the wall etc.complete. 75mm |
| 36 | Providing and fixing 25mm x 1.40 mm clips made out ofaluminium strip of approved design to unplasticisedPVC soil, waste & vent pipes by means of Plastic WallPlugs fitted in the brick work/R.C.C work by drillingwith the help of mechaine and screwed with M.S. screwsof required length and making good the wall etc.complete. 110 mm |
| 37 | Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes, havingthermal stabilityforhot&coldwatersupplyincludingallCPVCplain&brassthreadedfittingsincludingfixingthepipewithclampsat 1.00mspacing. This includes jointingofpipes&fittingswithonestepCPVC solvent cementand testingof joints complete asper directionofEngineer in Charge.Internal work - Exposed on wall 15 mm nominal outer dia .Pipes. |
| 38 | Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes, havingthermal stabilityforhot&coldwatersupplyincludingallCPVCplain&brassthreadedfittingsThisincludesjointingofpipes& fittings with one step CPVC solvent cement,trenching ,refilling&testing of jointscompleteasper direction of Engineer in Charge. External work 25 mm nominal outer dia .Pipes |
| 39 | Providing and fixing C.P. brass stop cock (concealed)of standard design and of approved makeconforming to IS:8931. 15 mm nominal bore. |
| 40 | Providing and fixing C.P. brass bib cock of approvedquality conforming to IS:8931 15 mm nominal bore |
| 41 | ProvidingandfixingPTMTsoapDishHolderhavinglengthof138mm, breadth102mm, heightof75mmwith concealed fitting arrangementsweighing notless than 106 gms. |
| 42 | Constructing soak pit 1.20 x 1.20 x 1.20 m filledwith brickbats including S.W. drain pipe 100 mmdiameter and 1.20 m long complete as perstandard design. |
| 43 | Demolishing brick work including stacking ofserviceablematerialsanddisposal ofunserviceablematerialswithall liftsanduptoa leadof 50metc.complete as per direction of the Engineer- in-charge:- In cement mortar. |
| 44 | Distempering with 1st quality acrylic distemper (readymixed) having VOC content less than 50 grams/ litre, ofapproved brand and manufacture to give an even shade[Payment shall be made after submission of TestCertificate issued by the Manufacturer] : New work ( two or more coats) over and including waterthinnable priming coat with cement primer. |
| 45 | Finishing walls with acrylic smooth exterior paint ofrequired shade of approved brand and manufacture[Payment shall be made after submission of TestCertificate issued by the Manufacturer] : New work ( two or more coats applied @ 1.67 litre/10 sqmover and including priming coat of exterior primer applied@ 2.20 kg/10 sqm) |
| 46 | Wiring for 2 way controlling light point with 3 x1.5 sq. mm pvc insulated Copper conductor cable (FR) in pvc casing and capping complete with PVC switch board and fancy type 2 way switch with cover plate including connection etc as required:- 1) Medium Point :- |
| 47 | Wiring for 2 way controlling light point with 3 x1.5 sq. mm pvc insulated Copper conductor cable (FR) in pvc casing and capping complete with PVC switch board and fancy type 2 way switch with cover plate including connection etc as required:- 1) Long Point :- |
| 48 | Supplying and fixing of the following Lamps &accessories including connection etc. as required. 1) 9 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :- |
| 49 | Wiring for circuit /Sub-main with following sizes PVC insulated copper conductor cable (FR) in PVC casing and capping etc. as required. 2x2.5 sqmm |
| 50 | Clearing jungle including uprooting of rank vegetation,grass, brushwood, treesandsaplingsofgirthupto30cmmeasured at a height of 1mabove ground level andremoval of rubbishuptoadistanceof 50moutside theperiphery of the area cleared. |
| 51 | Providing and fixing IS : 3564marked aluminiumextruded section body tubular type universalhydraulicdoor closerwithdoublespeedadjustmentwith necessary accessories and screws etc. complete. |
| 52 | Providing and fitting fixing of A.C Machine (Godrej/Saamsung/Blu Star/Haier/LG Make/ Hitachi) split type 1.5 ton capacity alongwith accessories like industrial socket, electric wire etc. complete as per direction of the Engineer-in-charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender