Tender For Maintanance And Repairs To Motor Pumpset At In Ward No:14 To 28 (Zone-Ll) Thanjavur City Municipal Corporation
Tender Value
10 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
20 days left
EMD
10000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thanjavur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintanance And Repairs To Motor Pumpset At In Ward No:14 To 28 (Zone-Ll) Thanjavur City Municipal Corporation
BOQ
| Sl. No. | Item Description |
| 1 | Removal of submersible pumpsets and its accessories from borewell for attending repairs etc complete as per Standard Specification. |
| 2 | Upto 5 HP(SOR2025-26 WD-W0871) |
| 3 | Above 5.00 HP to 10.00 HP (SOR2025-26 WD-W0872) |
| 4 | Above 10.00 HP to 20.00 HP (SOR2025-26 WD-W0873) |
| 5 | Rewinding of 1.5 Hp Single phase Submersible motor with 1.00 SWG copper wound wire minimum 3Kg copper weight including labour and material charges etc complete as per standard Specification(Three quotation obtain lowest rate addopted) |
| 6 | Rewinding of 10/15 Hp Three phase Submersible motor with 1.00 SWG copper wound wire minimum 3Kg copper weight including labour and material charges etc complete as per standard Specification |
| 7 | Conveyance of power pumpset (centrifugal, jet and submersible) and its accessories from divisional stores to site of works.(vide P205 / WD-W0886 /Twad SOR2025-26) |
| 8 | Supply and fixing of 3 Phase panel board with star delta with two level guard and auto start etc., complete as per standard specifications (15 HP) including timer facility(WD-M1918/SOR2025-26) |
| 9 | Supply and fixing of Single Phase panel board with two level guard and auto start etc., complete as per standard specifications (1.5 HP) including submersible pumpset ( WD-M1906/ SOR2025-26) |
| 10 | Supply,Delivery and jointing of XLPE insulated and sheathed 3 core flat type copper cable conforming to IS 694/1990 as follows |
| 11 | 1.5 Sqmm Flat 3 core cable (WD-M1973) |
| 12 | 2.5 Sqmm Flat 3 core cable (WD-M1974) |
| 13 | 4.0 Sqmm Flat 3 core cable (WD-M1975) |
| 14 | 6.0 Sqmm Flat 3 core cable (WD-M1976) |
| 15 | Rate for flushing of borewell of 6'' required less than 4 hours operation using drill rods/hose with required size of pipes for varies capacity compressor including transportation,labour and fule charges for compressors as directed by the engineer incharge. |
| 16 | 600 CFM (100/150 PSI) (WD-W0895) |
| 17 | 300/250 CFM (100 PSI) (WD-W0896) |
| 18 | Supply and Delivery of 80 mm heavy duty type hexogonal head with long thread and welding, machining charges as per panruti model coupling with collar and bushes per set etc complete as per standard specification (Three quotation obtain lowest rate addopted) |
| 19 | Supply and Delivery of 32 mm SS coller bush the rate including all cost of materials and labour etc complete as per standard specification(Three quotation obtain lowest rate addopted) |
| 20 | Supply and delivery of 80mm dia GI B class Pipe etc., complete as per standard specifications.( WD-M0491/ SOR2025-26) |
| 21 | Laying of 80 mm dia GI pipes and specials to proper line and level including joinding but excluding codt of pipes and joinding materials for plumbing works etc complete as per standard specification( WD-W0262/SOR2025-26) |
| 22 | Supply and delivery of 100 mm dia submersible 1.5HP motor pump sets suitable for 150 mm dia borewell with ISI make 8034/2002 with out panel board and following duty condition and requirements HP-1.5,RPM-2880,Discharge-20LPM,Head-125 m,Volt-230V etc complete as per Standard Specification.( WD-M1597/SOR2025-26) |
| 23 | Supply and delivery of clear water vertical wet type submersible pumpset suitable 75x225 for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continous rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ+/- 5 % (WD-M1634/ SOR2025-26) |
| 24 | Supply and Delivery of 1/2'' Nelon rope etc complete as per Standard specification( M-1072/ SOR2025-26) |
| 25 | Supply and Delivery of UPVC column Pipe etc., complete as per standard specifications. |
| 26 | 32mm UPVC column Pipe (SOR2025-26 WD-M0049) |
| 27 | 80mm UPVC column Pipe (SOR2025-26 WD-M0053) |
| 28 | Supply and delivery of VIR wire etc., complete as per standard specifications |
| 29 | Post to Metre Board (9/16) |
| 30 | Metre Board to Main Switch (7/16) |
| 31 | Re erection of submersible pumpsets and its accessories from borewell for attending repairs etc complete as per Standard Specification |
| 32 | Upto 5 HP(SOR2025-26 WD-W0871) |
| 33 | Above 5.00 HP to 10.00 HP (SOR2025-26 WD-W0872) |
| 34 | Above 10.00 HP to 20.00 HP (SOR2025-26 WD-W0873) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender