Tender For Providing Cctv Arrangement And Ac Repair For Neelagiri Corporation School In Ward No:49
Tender Value
26 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
18 days left
EMD
26000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thanjavur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Cctv Arrangement And Ac Repair For Neelagiri Corporation School In Ward No:49
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork excavation in all soils and subsoils to full depth as may be directed except hardrock requiring blastering inclusive of all shoring, strutting and bailing out water wherever necessary and depositing the surplus earth with initial lead and lift etc., complete as per standard specifications.with conveyance upto 2Km lead |
| 2 | Supplying and filling in foundation and basement with filling sand in layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specification. |
| 3 | Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 4 | Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers. |
| 5 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification |
| 6 | Providing granolithic floor finish of 25mm thickness with plain cement concrete 1:2:4 (One Cement, Two crushed sand (M-Sand) and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers) |
| 7 | B.KITCHEN WITH DINING ARRANGEMENTS AND PAVERBLOCK |
| 8 | Earthwork excavation in all soils and subsoils to full depth as may be directed except hardrock requiring blastering inclusive of all shoring, strutting and bailing out water wherever necessary and depositing the surplus earth with initial lead and lift etc., complete as per standard specifications.with conveyance upto 2Km lead |
| 9 | Supplying and filling in foundation and basement with filling sand in layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specification. |
| 10 | Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 11 | Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38 |
| 12 | column |
| 13 | plinth beam |
| 14 | Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors. |
| 15 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - |
| 16 | Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9\\" X 43/8\\"X 2 3/4\\" including finishing, curing, etc., complete complying with standard specification - 100CFT |
| 17 | substructure |
| 18 | superstructure |
| 19 | Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 20 | Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers. |
| 21 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification |
| 22 | Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement |
| 23 | Supplying, fabricating and fixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12 mm thick PLB board and 5.5 mm thick glazed door using rectangular Alu.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, Al. Clips, Best double action floor springs, Aluminium Handles on both sides,floor stopper,Tower bolt, Locks and glass including all materials, Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc.,complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections. |
| 24 | Supplying and fabrication and fixing in position of anodised natural colour matt finish sliding window in two track in all floors with following sizes. All the three shutters with slinding arrangements, the bottom section should have Gutter arrangements so as to drain the water entering and made with extruded aluminium section for outer frames as shown below with necessary accessories such rubber beading. Aluminium clips, rubber beading,handle and fixing 4mm thick clear sheet glass including all required for fabrication etc., complete.Necessary dismantling making holes in RCC columns, beams, masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing as directed by the departmental officers.The Al.Surfaces is to be anodised with matt finish under electrically condition in accordance with ISI 1868/1962 specification for an average anodic film thick of not less than 15 microns. |
| 25 | Supplying and fixing in Cuddapah Slab 38 / 40mm Thick etc.,complete, in all floors. |
| 26 | Supplying and fixing in STAINLESS STEEL SINK 600mm x 450mm x 200mm etc.,complete, in all floors |
| 27 | Wiringwith2x1.5sq.mm. PVCinsulatedSCunsheathedFRLScopperconductorof1100Vgrade in suitable PVC rigid pipe on wall and ceiling with PVC accessorie sand with TW switch box and 5AFT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (5 points per coil) |
| 28 | Wiring with 2x1.5 sq.mm. PVC insulated single core unsheathedFRLScopper conductor cableof 1100V grade insuitableheavygauge MS conduit pipe on wall and ceiling with MS accessories with150mmx100mmx75mm MS switch box inflush with wall with 3mm thick hylu msheet cover for 5A3 pin non inter locking flush type CS plug with painting of suitable colour with continuous earthwire connection of 1.5 sq.mm copper wire wire for open plug point |
| 29 | supply and fixing of 1200mm (48\\") sweep AC ceiling fan 5 star rated complete ( Lower end) with 2 module 100W fan step regulator (Lower end) with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18\\") |
| 30 | Supplyandfixingofsingleboxtype4'40WfluorescentfittingcompletewithcopperchokeandcondensorwithTWroundblocks on wall or ceiling with flu tube with PVC unsheathed FRLS copper leads from terminals to the fitting |
| 31 | Painting two coats of newly plastered wall surface with ready mixed Cement paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification |
| 32 | Supplying, fabricating, erecting and fixing gypsum Board False Ceiling upto a ceiling height of 4.5m from floor level including cost and coveyance of all materials and labor etc complete as per standard specifications. |
| 33 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete |
| 34 | Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,. |
| 35 | C.CCTV ARRANGEMENTS,AC REPAIR |
| 36 | Supply of 16ch 5mp Nvr complete as per standard specifications as directed by departmental officers |
| 37 | Supply of 4por Poe Switch as directed by departmental officers |
| 38 | Supply of 4`Mp Ip Bullet Camera as directed by departmental officers |
| 39 | Supply of 8 Port Port Poe With Sftp Port as directed by departmental officers |
| 40 | Supply of Cat 6 Copper Cable (305 Dr) as directed by departmental officers |
| 41 | Supply of 2.5mm 3core Copper as directed by departmental officers |
| 42 | Supply of 6u Network Rack as directed by departmental officers |
| 43 | Supply of Rj 45 Jack as directed by departmental officers |
| 44 | Supply of Io Box as directed by departmental officers |
| 45 | Supply of Power Manager as directed by departmental officers |
| 46 | Supply of 32inch Led Tv as directed by departmental officers |
| 47 | Supply of 1.5 Mtr Patch Cable (Rj45) as directed by departmental officers |
| 48 | Supply of Cctv Box Enclosure as directed by departmental officers |
| 49 | Supply of 2u Rack as directed by departmental officers |
| 50 | Supply of 4u Rack as directed by departmental officers |
| 51 | Supply of 5 Mtr Hdmi Cable as directed by departmental officers |
| 52 | Supply of Ofc Cable 6 Core as directed by departmental officers |
| 53 | Supply of Ofc Join Closure Box as directed by departmental officers |
| 54 | Supply of Ofc Patch Cable as directed by departmental officers |
| 55 | Supply of Media Converter as directed by departmental officers |
| 56 | Supply of Cctv Networking Charge as directed by departmental officers |
| 57 | Supply of 2tb Av Hardisk as directed by departmental officerss |
| 58 | Supply of 1250watts Inverter as directed by departmental officers |
| 59 | Supply of Inverter Metal Stand as directed by departmental officers |
| 60 | Supply of Battery Exide 150ah(3years) as directed by departmental officers |
| 61 | Supply of Sfp Module as directed by departmental officers |
| 62 | Supply of 1inch Pipe as directed by departmental officers |
| 63 | Supply of 1 Inch Bend as directed by departmental officers |
| 64 | Supply of 1 Inch Junction Box as directed by departmental officers |
| 65 | Supply of 1 Ich Casing Pipe as directed by departmental officers |
| 66 | Supply of 1 Inch Nail Clamp as directed by departmental officers |
| 67 | Supply of Ss Nail Clamp as directed by departmental officers |
| 68 | Supply of 1 Sq Mm Wire as directed by departmental officers |
| 69 | Supply of 16ch 5mp Nvr complete as per standard specifications as directed by departmental officers |
| 70 | Supply of 1.5 Sq Mm Wire as directed by departmental officers |
| 71 | Supply of 60 Watts Horn Outdoor as directed by departmental officers |
| 72 | Supply of 30 Watts Speaker as directed by departmental officersficers |
| 73 | Supply of Wireless Mic as directed by departmental officers |
| 74 | Supply of 250 Watts Ahuja Amplifier as directed by departmental officers |
| 75 | Supply of Ac Box Metal as directed by departmental officers |
| 76 | Supply of 16 Sqmm Ug Gable 4core as directed by departmental officers |
| 77 | Supply of 4 Sqmm Wire as directed by departmental officers |
| 78 | Supply of 6way 3phase Db Box as directed by departmental officers |
| 79 | Supply of 20 Ams Mcb C curve as directed by departmental officers |
| 80 | Providing Ac Installation Charges |
| 81 | Providing Electrical Labour Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender