Tender For Repair To Flooring, Sanitary Works, Ms Balcony, Servant Qtr, Ms Stairs, Plastering Roof Water Proofing Treatment, Plinth Protection, Repair Of Kitchen And Other Allied B/R Works In Omq Blocks At Af Stn Palam Under Ge (Af) Gurgaon No 1
Tender Value
55 Lakhs
Estimated cost
Bid Submission
12 Aug 2026
27 days left
EMD
1.07 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Flooring, Sanitary Works, Ms Balcony, Servant Qtr, Ms Stairs, Plastering Roof Water Proofing Treatment, Plinth Protection, Repair Of Kitchen And Other Allied B/R Works In Omq Blocks At Af Stn Palam Under Ge (Af) Gurgaon No 1
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Cement Concrete (un-reinforced) of any description, not exc. 150mm thickness (above or below Ground Level) and removing out side from MoD land complete all as specified and directed. |
| 2 | Material and Labour for PCC 1:5:10 type E2 Using 40mm graded stone aggregate as in filling under floor/sunken slab complete all as specified and as directed. |
| 3 | Cutting upto a depth of 2.5cm into concrete/Brick walls and trimming surface as required,girth exc. 30cm and Fixing of 25mm dia GI pipe (med gde) spout of length 45 cm with CM 1:3 as in sunken base complete all as specified and as directed. |
| 4 | Dismantling of existing brick tiles in single layers on roof including grass, trees treating with chemical and cleaning the surface and removal out side of MoD land complete all as specified and as directed.Note :Taking down earthng strips and solar panel wires from roof and re-fixing on the same position after APP laying is deemed to be inclusive of rate quoted by the contractor. |
| 5 | Demolition of existing mud in roofs of any thickness including plastering and leeping (whether full thickness removed or only a part thereof) and removing of mud out side of MoD land, (up to 4th storey) all as specified and direction by Engr in charge. |
| 6 | Material and Labour for Cutting out cracks 'V' section on existing roofs or terrace cleaning out and filling solidly with a hot mixture bitumen and clean dry sand 1:1 by weight complete all as specified and directed. |
| 7 | Material and Labour providing cement concrete in roof or mud stops using type B-1, 1:2:4 (20mm graded aggregate) rounded or chamfered on edges or making slop on roof complete (up to 4th Storey) all as specified and as directed. |
| 8 | Material and Labour 25 mm, thick PCC 1:2:4 TYPE B-0 (using 12.5 mm graded stone aggregat) as in padding of floor/ roff surfaces finishees even and smooth surface, complete all as specifeid and directed.complete (upto 4th storey) all as specified and as directed. |
| 9 | Material and Labour for 10 mm thick cement plastering in CM 1:4 on brick/concrete surfaces of roof and parapet, mixed with water proofing compound, as per manufacturer instruction finished even and smooth without using extra cement complete (up to 4th storey) all as specified and as directed by Engineer-in-Charge. Note :- Water proofing compound shall be measured & paid separately. |
| 10 | Supply only liquid water proofing compound. |
| 11 | Material and Labour water proofing treatment on roof and sunken portion of floor and vertical surface consisting as under:- (a) Applying evenly a coat of bituminous primer conforming to IS-3384:1986 @ 0.30 Kg/sqm including preparation of roof surfaces (b) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg/Sqm on plaster surface all as specified.(c) A layer of 3mm thick APP polymeric membrane of weight not less than 3.60 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/ sqm), duly sealed at over laps & joints with end laps of the 10cm and side over laps of 7.5cm by flame (by torch application) all as per manufacturer’s instructions, complete all as specified and directed. |
| 12 | Material and Labour for applying two coat Bitumen water proofing aluminium heat resistance paint on the roof as per manufacture instructions complete all as specified and directed. |
| 13 | Material and Labour for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 coarse sand mixed with Liquid WPC) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 white cement: 1/2 coarse sand: 2 stone chipping 6mm t0 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and as directed. (Payment for providing grooves shall be made separately) |
| 14 | Material and Labour for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using Aluminium Channel, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as specified and directed. |
| 15 | Taking down Cement Plaster from wall and ceiling of any description from Brick/concrete surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and as directed. (Note :- Rate included for four storey building including scaffolding and all safety measures) |
| 16 | Material and Labour for 15 mm thick cement plastering in two layer (under layer 10 mm and uper layer 5 mm thick) in CM 1:4 on brick/ concrete surfaces on wall (exterior/ interior), upper layer of 5 mm thick mixed with water proofing compound, finished even and smoth without unsing extra cement complete all as specified and as directed. (Note : wpc shall be measured and paid separately). |
| 17 | Material and Labour for 5 mm thick rendering in CM 1:3 on concrete/gunniting surface as in ceiling finished even and smooth w/o using extra complete all as specified and directed. |
| 18 | Material and Labour for 15 mm thick rendering on brick or concrete surfaces in internal surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and as directed. |
| 19 | Material and Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives coat of exterior primer applied @ 0.90 litre/ 10 @ 1.43 litre/ 10 sqm over and including priming sqm over new surfaces complete all as specified and as directed. (Note :- Rate included for four storey building including scaffolding and all safety measures). |
| 20 | Material and Labour for preparation of newly plastered surfaces of Ceiling, and applying two coat of Oil bound distemper white or colour, over one coat of primer including wall care putty upto 1 mm thick as required (multipurpose mixer shall be used for uniform adn proper mixing of putty) by using smart periodical methodology/ auto roller, complete all as specified and directed. |
| 21 | Material and Labour for applying two coat of Distemper oil emulsion by Auto Roller over a coat of primer over 2 mm thick birla putty punning including finishing by Sanding Machine and Auto Roller new surface complete all as specified or as directed. (Note :- Rate included for four storey building including scaffolding and all safety measures) |
| 22 | Material and Labour for comlpete removal of existing treatment from old decorated plastered surfaces of walls by vaccum based sanding machine complete all as specified, removal of nails etc and filling cracks/ hole with putty, applying wall care putty upto 1 mm thick as required (multipurpose mixer shall be used for uniform adn proper mixing of putty) and applying two coats of oil bound distemper white or coloured over a coat of approved primer by using smart periodical methodology/ auto roller, complete all as specified and directed. (Note :- Rate included for four storey building including scaffolding and all safety measures) |
| 23 | Material and Labour for complete removal of existing treatment from old decorated plasterred surfaces of walls by vaccum based sanding machine complete all as specified, removal of nails etc and filling cracks/ hole with applying wall care putty upto 1 mm thick as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of exterior emulsion anti fungal paint 100% acrilic smooth exterior paint @ 1.67 Ltr/ 10 Sqm, colour as approved by GE, over & including a coat of approved primer by using smart periodical methodology/ auto roller, complete all as specified and directed. (Note :- Rate included for four storey building including scaffolding and all safety measures) |
| 24 | Material and Labour for comlpete removal of existing treatment from old decorated plastered surfaces on ceilings by vaccum based sanding machine complete all as specified, removal of nails etc and filling cracks/ hole with putty and applying two coats of oil bound distemper white or coloured over a coat of approved primer by using smart periodical methodology/ auto roller, complete all as specified and directed. (Note :- Rate included for four storey building including scaffolding and all safety measures) |
| 25 | Excavation in post holes not exc 0.5 Cum, getting out, returning filling in layers n exc 25cm in thickness and removing surplus soil to a distance n exc 50 surface in hard/dense soil, complete all as specified and directed. (Note :- Rate included for four storey building including scaffolding and all safety measures). |
| 26 | Material and Labour for PCC 1:3:6 Type C2 (using 40mm Graded stone aggregate) as in for fixing posts, bed plates, anchor blocks, corbels, brackets, including necessary form work etc. complete all as specified and as directed. |
| 27 | Material and Labour fore Mild steel angle iron as in posts, struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh and wire any type) ncluding all necessary drilling, bolting or riveting and embedding in concrete and Fe-290 Gde E-165 complete all as specified and as directed. |
| 28 | Material and Labour for MS bars 10mm dia as in stiffener to chain link fencing incl necessary cutings, bending, etc. confirming to Fe-250 and over cut to length, bent to shape required inclundind cracking, bending, spirally hooping with ms (annealed) with bolts, complete all as specified and directed. |
| 29 | Supply and Fix in repair chain link MS galvanised fencing, any size or type including line wires, any mesh, standard rails, straining bolts etc including provision of binidng wire all as specified and directed. |
| 30 | Supply and fixing of mild steel screw bolt (machine made) of 11 to 15 mm neak diameter with hexaganal or squre head and bun end.screw other or screw both end,each screw and to be fited with wisher and one hexaganon or squre nut.exc.5cm and n.exc. 10 cm long, complete all as specified and directed. |
| 31 | Material and Labour for welding in repairs thickness of Metal to be welded n.exc 6mm, complete all as specified and directed. |
| 32 | Material and Labour Mild steel work as column etc. For frame work to support rafter/purlin for roof including cutting welding and all necessary drilling,bolting or riveting etc. Complete conforming to Fe 410 W all as specified and as directed. |
| 33 | Supply and Fix for Mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, complete all as specified and directed. |
| 34 | Material and Labour for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed in repair with self tapping J hooks including dismantling of existing sheet in any position complete all as specified and directed. |
| 35 | Supply and Fix mild steel work conforming to Fe-310-0 or 410-0 as in railing, bands, hold fasts, wall ties, wind ties straps, supports and stay for,Steps,laddar. rain water pipes,clamps and similar articles complete all as specified and directed. |
| 36 | Supply and Fix Framed work such as grills, gratings, with ornamental & intricate design for windows, ladder etc., with ends of bar shoulder &/or riveted, or forged into spikes; framed guard bars, incl hinges, framed balusters, walk ways; railings & similar work conforming to Fe 290 GDE -E-165, complete all as specified and directed. |
| 37 | Material and Labour for applying two coats synthetic enamel paint over a coat of red oxide/zinc chrome primer including preparation of new steel/iron surfaces exc 10cm in width or girth all as specified and as directed by Engineer-in-charge. |
| 38 | Dismantling of wall and ceiling boards (Fibre, pulp, insulation, wooden etc.) or insulation board / slabs any thickness incl cover fillets complete all as specified and as directed.. |
| 39 | Supply and Fix 2nd class hard wood plain fillets not exc 3 sqcm sectional area, square, rectangular or tringular in section, wrought fixed with nails complete all as specified and as directed by Engineer- in- Charge. |
| 40 | Material and Labour 18/19mm thick one side decorative and other side balancing lamination factory pressed HDHMR board with Borer resistant, fungal resistant, water resistant and termite resistant as per IS 710 of approved brand cup board shutter including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with two no of stainless steel L Bihari hinge and one SS handle 75 mm long handle on each shuutter etc. complete as per direction of Engineer-in- harge. (Payment of providing and fixing L bihari stainless steel hinges shall be paid separately) |
| 41 | Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge. Note:- (i) One set comprises of two telescopic channel.(ii) Runner/ Channel should be SS 304 grade and load capacity should not be less than 45 kgs |
| 42 | Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in charge. NOTE:- (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately) |
| 43 | Supply and Fix as per IS : 12817 marked stainless steel L bihari Hinge with 0-15 degree crank and thickness upto 7 mm as required etc. complete and specified by Eng-in-charge. |
| 44 | Providing and fixing magnetic catcher Double strip (horizontal type) of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc., complete all as specified and directed. |
| 45 | Providing and fixing stainless steel handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc., complete all as specified and directed. |
| 46 | Supply and Fix in repair 18/19 mm thick prelaminated particle board interior gde prelaminated one side with with decorative choice and other side white lamination fixed with screws as in cup board shutters & shelves and pelmet boxes etc complete all as specified and as directed by Engineer- in- Charge. Please Enable Macros to View BoQ information |
| 47 | Supply and Fix in repair 18/19 mm thick prelaminated particle board interior gde prelaminated one side with with decorative choice and other side white lamination fixed with screws as in cup board shutters & shelves and pelmet boxes etc complete all as specified and as directed by Engineer- in- Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 29 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender