Tender For Repair/Replacement Of Joinery/Plastering, Flooring, Plinth Protection, Rain Water Pipe, Sanitary Appliances & Misc B/R Items Of Water Supply Installation Under Ge (Af) Adm Area Gwalior.
Tender Value
49 Lakhs
Estimated cost
Bid Submission
11 Aug 2026
27 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gwalior → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Joinery/Plastering, Flooring, Plinth Protection, Rain Water Pipe, Sanitary Appliances & Misc B/R Items Of Water Supply Installation Under Ge (Af) Adm Area Gwalior.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed. |
| 2 | M&L for brick work with subclass B bricks old size straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 3 | Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key & scrubbing down with water etc. complete all as specified and directed. |
| 4 | M&L for 10mm thick ready mix plaster on brick wall, concrete surface finished even and smooth without using extra cement complete all as specified and directed |
| 5 | M&L for 15mm thick ready mix plaster on brick wall, concrete surface with finished even and smooth without using extra cement complete all as specified and directed |
| 6 | M&L for 5mm thick ready mix plaster on ceiling /facia/roof projection and finishing even and smooth without using extra cement complete all as specified and directed. |
| 7 | M&L for preparing new plaster surfaces of ceilings and applying two coats of Oil eulsion over a coat of primer complete all as specified and directed. |
| 8 | M&L for complete removal of existing treatment on old ceiling surface and applying two coat of Oil emulsion over a coat of primer complete all as specified and directed. |
| 9 | M&L for preparing new plaster surfaces of Walls and applying two coats of Oil Emulsion over a coat of primer complete all as specified and directed. |
| 10 | M&L for complete removing existing treatment on wall surface and applying two coats of oil Emulsion over one coat of primer complete all as specified and directed. |
| 11 | M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm / liter and UV resistance as per IS15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre /10sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm over new plaster surfaces of walls complete all as specified and directed. |
| 12 | M&L for complete removal of existing treatment and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm / liter and UV resistance as per IS15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre /10sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm over old surfaces of walls complete all as specified and directed. |
| 13 | M&L one coat of synthetic enamel paint over old painted surface of wood work of any description over 10 cm width or girth including preparation of old surfaces complete all as specified and directed. |
| 14 | M&L for preparation of old steel Surfaces of any description, over 10cm in width or girth and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 15 | Taking down chowkat or frames with shutter (without taking off shutters from the frames) n.exc 1.5 Sqm including iron mongery each complete all as specified and directed. |
| 16 | Taking down chowkat or frame with shutters area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the shutters from the frame) including iron mongery and cutting holes for hold fasts & making good complete all as specified & directed. |
| 17 | Taking down shutters of any description area exc 1 Sqm and n.exc 2Sqm each, complete all as specified and directed. |
| 18 | Refixing of shutters of any description exceeding 1 sqm but not exceeding 2 sqm each in same or other opening(s) after resecuring or easing & adjusting, including taking down shutter from chowkat or frame complete all as specified and directed. |
| 19 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed . |
| 20 | S & F pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed. |
| 21 | S & F pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed. |
| 22 | M&L for PCC 1:2:4 type B-1 (using 12.5 mm graded stone aggregate) as in posts, holdfasts including necessary formwork as per site requirement complete all as specified and directed. |
| 23 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: (1) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. (2) M.S. hold fast/ lugs or SS dash fasteners shall be paid separately. |
| 24 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: (1) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. (2) M.S. hold fast/ lugs or SS dash fasteners shall be paid separately. |
| 25 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: (1) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. (2) M.S. hold fast/ lugs or SS dash fasteners shall be paid separately. |
| 26 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed.Note: Stainless steel butt hinges and necessary S S screws shall be paid separately. |
| 27 | S & F 30 mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides,both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed. |
| 28 | S & F 35 mm thick 2nd class hard wood glazed skeleton shutters factory made open rebated and prepared to recieve glass, guazed etc ( with sash bar ) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part 1, Section 8 , clause 8.24 (a) and fitted to chowkhat complete all as specified and directed. |
| 29 | M&L two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces on new wooden surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and directed. |
| 30 | M&L for Providing and fixing factory made UPVC white colour Sliding window Two/Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. incl Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories, 5mm thick coloured Tinted sheet glass & builder hardware complete all as specified and directed. |
| 31 | S&F for mild steel framed work such as grills, grating etc with ends of bars shouldered and or riveted into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, cooler platform, frame work of water tanks and similar work including welding conforming to Fe-290 & grade E-165 etc complete all as specified and directed. |
| 32 | M & L for preparation of new steel Surfaces of any description, over 10cm in width or girth, and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 33 | Hacking out old broken glass panes 4 mm thick from steel/Aluminium frame including putty/ metal beadings and supply and fix sheet glass ordinary 4mm thick, in squares n.exc. 0.50 Sqm in each pane including necessary arrangement new oil putty or with existing metal beadings (up to third floor) complete all as specified and directed. |
| 34 | Hacking out old broken glass panes 4 mm thick from wooden framed shutters including putty/wooden beadings and supply and fix sheet glass ordinary quality, 4mm thick, in square n.exc. 0.5 Sqm in each pane including necessary arrangement oil putty/wooden/metal beads complete all as specified and as directed. |
| 35 | S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanized wire staples etc. in wooden door / window and Steel door / window, completed all as specified and directed. |
| 36 | S&F stainless steel hinges medium weight butt hinges of 100 mm size complete all as specified and directed. |
| 37 | S&F stainless steel hinges medium weight butt hinges of 75 mm size complete all as specified and directed. |
| 38 | S&F SS handle cast type, anodised 150 mm size complete all as specified and directed. |
| 39 | S&F SS handle cast type, anodised 100 mm size complete all as specified and directed. |
| 40 | S&F SS tower bolts of extruded section and fixed 150mm long complete all as specified and directed. |
| 41 | S&F SS barrel tower bolts of extruded section and fixed 100mm long complete all as specified and directed. |
| 42 | S&F 250mm long SS sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed. |
| 43 | S & F for mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 44 | S & F for Floor door stopper of SS body and tongue, anodised, with hard drawn steel spring over all length of cover plate 150mm, complete all as specified and directed. |
| 45 | Dismentling of floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. |
| 46 | Demolition of PCC/stone slab in ground floor n.exc15cm thickness below or above ground level complete all as specified and directed. |
| 47 | M&L for PCC type B-0 1:2:4 (using 12.5mm aggregate ) as in floor leveling to recive the screed/pcc complete all as specified and directed. |
| 48 | M&L 75 mm thick PCC 1:3:6 type C2 (using 40mm graded stone agg) as in plinth protection finished even and smooth with using extra cement complete all as specified and directed. |
| 49 | M&L glazed colour ceramic coloured tiles 450 x 300 x 7mm thick in vertical surfaces such as skirting dados etc, set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles including fixing with neat cement based over 10mm thick plaster cement motar 1:4 complete all as specified and directed. |
| 50 | M&L for coloured non skid ceramic tiles joint free floor tiles 7- 8 mm thick (square/rectangular) area of each tiles exc. 0.06 sqm but not exc. 0.11 sqm, in floors etc ncluding fixing with neat cement over screed bed or bedding layer of mortar 15 mm thick CM 1:6 complete all as specified and directed. |
| 51 | M&L for coloured non skid ceramic tiles joint free floor tiles 7- 8 mm thick (square/rectangular) area of each tiles exc. 0.18 sqm but not exc. 0.38 sqm, in floors etc ncluding fixing with neat cement over screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified and directed. |
| 52 | M&L coloured ceramic tiles joint free non skid coloured ceramic tiles 7- 8 mm thick (square/rectangular) area of each tiles exc. 0.18 sqm but not exc. 0.38 sqm, in skirting etc ncluding fixing with neat cement over dado or bedding layer of mortar 10 mm thick plaster cement motar 1:4 complete all as specified and directed. |
| 53 | M&L for coloured tiles scratch free joint free floor tiles 12 mm thick (square/rectangular) area of each tiles exc. 0.18 sqm but not exc. 0.38 sqm, in floors etc ncluding fixing with neat cement over screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified and directed |
| 54 | M&L for coloured tiles scratch free joint free floor tiles 12 mm thick (square/rectangular) area of each tiles exc. 0.18 sqm but not exc. 0.38 sqm, in floors etc ncluding fixing with neat cement over screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified and directed. |
| 55 | Demolition stone slabs and tiles of laid bedded and pointed in any mortar any description or thickness in floors, aprons etc. complete all as specified and directed. |
| 56 | M&L Granite (of any type) work, 20 mm thick (Table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms in cm 1:4 and including pointing in white cement 1:2, using marble dust with admixture of pigment to match with marble shade of Granite including half moulding of granite edges including screed bed 20mm thick in cm 1:6 complete all as specified and directed. |
| 57 | M&L for machine cut Kota stone slab 20 to 25mm thick Mirror polished in treads, landings of stair case over cement screed bed laid and jointed wilth grey cement slurry mixed with pigment to match the shade of the slab lincluding & grinding polishing over and including screed bed 20mm thick in cm 1:6 complete all as specified and directed. |
| 58 | M & L for machine cut Kota stone slab as in skirting, risers 20 to 25 mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with mirror polish granite finish including backing coat 10 mm thick in cm1:3 complete all as specified and directed. |
| 59 | M&L for 75mm thick cement concrete in Sub base for type D2 1:4:8 (40mm graded aggregate) complete all as specified and directed. |
| 60 | M & L for Sand filling under floors or in foundations including watering and consolidation etc. complete all as specified and directed. |
| 61 | M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment laid in floor and joints of interlocking tiles/ paver block to be filled with fine sand and broomed etc complete all as specified and directed. |
| 62 | M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-35 grade with grey cement and pigment laid in floor and joints of interlocking tiles/ paver block to be filled with fine sand and broomed etc complete all as specified and directed. |
| 63 | M&L for chequred tiles of approved design,colour & of ( size 300mmx300mmx25mm) set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles & includind 20 mm thick screed bed or bedding layer in CM (1:4) complete all as specified and directed. |
| 64 | M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 65 | M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in coping, kersbs, mud stops rounded or chamfered in edges etc, finish even & fair without using extra cement complete all as specified and directed including necessary formwork as per site requirement |
| 66 | Mild steel bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 67 | M&L reinforced Cement concrete (1:2:4) type B-1, ( 20 mm graded aggregate ) as in chajjas/roof projection/Rcc railing repairs as in similar work complete all as specified and directed. |
| 68 | M&L formwork to chullah hoods, chajjas, trough and similar itmes including edges complete all as specified and directed. |
| 69 | Disconnecting existing tanks of capacity exc 250 litre but n. exc 500 litre for repair work and refixing the same after repair work is over, complete all as specified and directed. |
| 70 | Disconnecting existing tanks of capacity of tank exc 500 litres and n. exc 1000 litres for repair work and refixing the same after repair work is over. |
| 71 | Dismentling of any type of existing roof treatment including tarfelt/ cement plaster, etc from roof surfaces including cleaning the surface and removing the debris from site out of MoD land complete all as specified and directed |
| 72 | Demolition of concrete any description and in any position not otherwise specifically provided including remove all dabris out site MOD land complete all as specified and directed. |
| 73 | M&L PCC type B-0,1:2:4 (using 20 mm graded stone aggregate) for providing cement concrete as levelling in roof etc. complete all as specified and directed. Note: WPC will be paid separately . |
| 74 | M & L for rendering 10 mm thick in cm 1:4 mixed with WPC @ 200 Ml per bag of cement on brick work / concrete surface of wall for sunken portion finished even and smooth without using extra cement complete all as specified and directed. Note: WPC will be paid separately . |
| 75 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 76 | M&L for single component weather resistant, liquid applied acrylic polymer based elastomric water proof coating using elastomeric water proofing membrance for all types of exposed roof slabs (new or old), terraces (slopes and flat ) water proof coating shall be UV Rays resistant, solar reflective, etc all as specified in below mentiond specification. 47.1 Aceylic polymer dispersion single component liquid applied system Sika cool coat not less than 650 micron (1.2mm system built up), contains cross-linking polymers, special glass micro fibres, pigments and advanced antifungal additive that provides long lasting tough water proofing membrane conforms to IS101, IS 2645, EN1542,ASTM D 5589, ASTM C-1202-08, ASTM D 4587, ASTM C 836, ASTM E1980, EN-673, EN-410.It should have solid content -66%(br weight), VOC<10 gm/l complies to Green building standards and should meet the properties of adhesion strength on cement after 14 days curing>1.5 N/mm2 as per EN1542, Tensile strength 1.5 Mpa as per ASTM D 412, Crack bridging properties 3.2mm as per ASTM C-836, Water absorption (% by mass)<10% as per ASTM D570, Solar reflectance index not less than 100(+-5%)(low wind to high wind condition),Elongation at break (200%) as per ASTM D412, Algae & fungel resistance as per ASTM D-5590, Shore A Hardness 45 after 1 month and shuld pass Accelerated weathering , 500 hours A Hardness 45 after 1 month and should pass accelerated weathering, 500 hours without any cracking, blistering &100% gloss retention as per ASTM D 4587. 47.2 Fully reinforced with glass fibre reinforced Sika Fab (R) 13. The roofing system should be compatible with bitumen System.47.3 Side termination bar of 2mm thick aluminium valley strip with one side bending for membrane termination to be used with SBF fasteners. 47.4 Providing and applying primer over the prepared surface with Sika cool coat Primer @Coverage 0.1-0.12 kg/Sqm. First coat: Sika cool coat consumption @ 0.5 kg/sqm.Reinforcement:Sika fab1. Second coat:Sika cool coat consumption @0.5 kg/sqm third coat: Sika cool coat, consuption @ 0.5kg/sqm and top coat:Sika cool coat primer, Cunsumption @ 0.05-0.08 kg/sqm complete all as specified and as directed. |
| 77 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridge fixed with J- hook bolt and nut complete all as specified and as directed. |
| 78 | M&L False ceiling with GI snap grid frame work of size 595mmx595mm in true horizontal level suspended on interlocking metal grid of hot dipped galvanised steel sections (glavazized @ 170gms/sqm and bottom exposed width prefinished with leaked polyster paint) consisting of main 'T' runners with suitably spaced joints to get required length and of size 38x24x0.3mm spaced at 1200mm centre to centre and cross 'T' of size 24x25x3mm 1200mm long spaced between main 'T' at 600mm center to centre to form a grid of 1200x600mm and secondary cross 'T' of length 600mm and size 24x25x.3mm to be interlocked at middle of the 1200x600mm panel to form grid of 600mmx600mm and wall angle of size 21x21x.3 and laying false ceiling tiles of 4mm thick fiber cement buidling board,white colour desinger type ready to fix non asbestos (minimum weight 4.8kg/sqm) fixed or laid/inserted to GI form work with screws/clips for false ceiling work including, wherever required, cutting/making, opening for services like diffusers, frills, light fittings, fixtures and smoke detectors etc. Main 'T' runners shall be suspended from ceiling using GI slotted cleats of size 25x35x1.6mm fixed to ceiling with 6mm dia and 50m long metal dash fastner, 4mm GI rods with galvanised steel leveling clips spaced at 1200mm centre to centre along main 'T' section (false ceiling system shall be capable to bear distributed load of minimum 15kg/sqm) incl dismantling of old celing board with grid complete all as specified and directed. |
| 79 | M&L for Roof trusses (framed), trussed, purlins, rafter,crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe 410 -W (Gde- E- 250) complete all as specified and directed. |
| 80 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 81 | Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in Concrete, brick work, masonry, etc. including taking out embedded portion and making good disturbed ground, complete all as specified and directed. |
| 82 | M&L Cement concrete type C2 1:3:6 (40mm graded aggregate ) as in foundation/bed block for Posts and Struts incl formwork complete all as specified and directed. |
| 83 | S&F,mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, running bars, for chain link fencing including embeding in concrete and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed |
| 84 | Dismantling fencing wire mesh/ barbed wire ,any type,complete all as specified and directed. |
| 85 | Supply only MS screw, bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exceeding 30cm long and dia of neck n.exc 12mm, complete all as specified and directed. |
| 86 | Supply only galvanised chain link MS Galvanised fencing any size 50*50*4mm or as approved by Engr-in -charge etc, complete all as specified and directed. |
| 87 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete all as specified and directed. |
| 88 | S & F 600mm x 450mm mirror of selected quality glass and fixed to wooden plugs with CP brass screws and cup washers complete all as specified and directed. |
| 89 | S & F Brass chromium plated, tubular towel rails 20 mm dia, D- type, 60 cm long between flanges, completed all as specified and directed. |
| 90 | S&F in repair brass chromium plated shower roses with swivel joints, 125 mm size in square with CP long shank arm including fixing to steel pipe or union, complete all as specified and as directed. |
| 91 | M&L 75mm PVC (SWR)floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 92 | M&L PVC(SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified and directed. |
| 93 | S&F in repair PVC white high and low level flushing cistern 10 ltr capacity with all fittings syphonic action with inlet ball valve and float including flush pipe, handle, bracket PVC short/long bend etc. complete all as specified and directed. |
| 94 | S & F in repair Vitreous China wash basin, flat back, size 450x300mm white, including waste pipe excluding taps, chain and plug and porcelain stopper but including brackets complete all as specified and directed. |
| 95 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) 'P' or 'S' trap including dismantling of old Water closet complete all as specifed and as directed. |
| 96 | S&F in repairs plastic water closet seat cover, White, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specifed and as directed. |
| 97 | S&F in repair angle cock fancy type CP with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore complete all as specified and directed. |
| 98 | S&F in repairs Two way tap, cast copper alloy with capstan head, CP fancy type with long body shank,15mm bore, complete all as specified and directed. |
| 99 | S & F in repair Pillar taps fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed. |
| 100 | S&F PVC connections pipe 15mm size with PTMT nuts of length 600 mm, complete all as specified and as directed. |
| 101 | Dismantling tanks water tank exc 500 but n exc 1000 Ltr. complete all as specified and directed. |
| 102 | S&F rotational moulded polythene water storage tank of capacity 1000 ltrs (Cylindrical/vertical with closed top), triple layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with fitting etc. of 20 mm dia directed complete all as specified and as directed. |
| 103 | S&F CPVC Gate valve 25 mm internal dia complete all as specified and as directed. |
| 104 | S&F Tank union 25mm internal dia complete all as specified and as directed. |
| 105 | S&F 25 mm internal bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) fixed in repairs, complete all as specified and directed. |
| 106 | S&F 25 mm internal bore nipple suitable for HDPE water tank (Min wt 45 gms) complete all as specified and directed. |
| 107 | Cutting chases, pinning in, stone concrete block or slabs wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth and removal of debris otside of MOD land complete all as specified and directed. |
| 108 | S & F in repair of CPVC pipes 25mm Incl. SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 20 mm GI pipe complete all as specified and directed. |
| 109 | S & F in repair of CPVC pipes 20mm all SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 15 mm GI pipe complete all as specified and directed. |
| 110 | S&F of 20 mm dia CPVC brass elbow complete all as specified and as directed. |
| 111 | S&F of 20 mm dia CPVC Brass Tee complete all as specified and as directed. |
| 112 | S&F of 20 mm dia female/male brass threaded adapter complete all as specified and as directed. |
| 113 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 114 | Dismantling of cast iron or renforced drain pipe 100mm/75mm dia of any description complete all as specified and directed. |
| 115 | S & F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 116 | S & F 100 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors including dismantling and breaking of pipe and fittings complete all as specified and as directed. |
| 117 | S&F in repair PVC (SWR) 75mm bore pipes single socketed, in any length with rubber ring joints laid in floors including dismantling and breaking of pipe and fittings complete all as specified and as directed. |
| 118 | S & F 75 mm PVC (SWR) junction single, (singl T ) (equal or unequal ), ordinary or inverted ( spigot or socket type ) or with paralle oval access doors branches complete all as specified and directed. |
| 119 | S&F PVC SWR 110 mm bends any radius comlete all as specified and directed. |
| 120 | S&F 75 mm PVC (SWR) bends any radius diminishing pieces or tapers (larger bore measured) complete all as specified and directed. |
| 121 | S & F 110mm PVC (SWR) vent cowl complete all as specified and directed. |
| 122 | S & F 110 mm PVC (SWR) WC Connector bent type sanitary connection socket to fit wc out let complete all as specified and directed. |
| 123 | S & F 110 mm PVC (SWR) P Trap (100/110mm bore) complete all as specified and directed. |
| 124 | S & F in repair stack clamps out of 50mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roofs for bore of 100mm complete all as specified and directed. |
| 125 | S & F in repair stack clamps out of 50mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roofs for bore of 75 mm complete all as specified and directed. |
| 126 | S&F in repairs bib tap, cast copper alloy with capstan head, CP fancy type with long body shank, screwed down with high pressure screwed for iron pipe & fixed 15mm bore, complete all as specified and directed. |
| 127 | M& L for Baroda Green Marble slab 18 to 20mm thick for window cill including 20mm thick screed bed in cm 1:6 complete all as specified and directed. |
| 128 | S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 129 | Demolition of reinforced cement concrete in ground floors etc not exceeding 15cm thickness as drain cover and similar works complete all as specified and as directed. |
| 130 | M&L for precast reinforced concrete 1:2:4 type B1 using 20 mm graded stone aggregate for drain cover slab set in and pointed in CM 1:6 including necessary formwork complete all as specified and as directed. |
| 131 | M&L for removing/cutting trees, vegetation, digging out roots from concrete or brick wall, filling holes on building (block of 4/6 qtrs) wall/roof/chhajja/water tank staging area etc and making good with cement mortar 1:4 complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
TodayAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 34 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender