Tender For Estimate For The Cost Of Renovation Of Ib At Thattekkad Bird Sanctuary During 2026-27
Tender Value
3.92 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
0 days left
EMD
9850
Bank guarantee accepted
Document Fee
790
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Idukki → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Estimate For The Cost Of Renovation Of Ib At Thattekkad Bird Sanctuary During 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | 15.12.1Dismantling doors, windows and clerestory windows (steel or wood ) shutterincluding chowkhats, architrave, holdfasts etc. complete and stacking within 50metres lead:Of area 3 sq. metres and below |
| 2 | 9.1.1Providing wood work in frames of doors, windows, clerestory windows and otherframes, wrought framed and fixed in position with hold fast lugs or with dashfasteners of required dia & length (hold fast lugs or dash fastener shall be paidfor separately).Second class teak wood |
| 3 | 9.53Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mmnominal size) |
| 4 | 14.29 Providing and fixing M.S. round or squre bars with M.S. flats at required spacing inwooden frames of windows and clerestory windows |
| 5 | 9.9.1.2Providing and fixing glazed shutters for door, windows and clerestory windows using4 mm thick float glass panes including ISI marked M.S. Pressed butt hinges brightfinished of required size with necessary screws.Second class teak wood30 mm thick |
| 6 | 13.68.1French spirit polishing:Two or more coats on new works including a coat of wood filler |
| 7 | 50.9.15.5Providing and fixing iron hooks and eyes: 100 mm |
| 8 | 13.1.112 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 9 | 50.10.1Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.)trusses etc., including cutting, hoisting,fixing in position and applying a priming coatof approved steel primer, including welding and bolted with special shaped washersetc. complete |
| 10 | 13.52.1Finishing with Epoxy paint (two or more coats) at all locations prepared and appliedas per manufacturer's specifications including appropriate priming coat,preparation of surface, etc. complete.On steel work |
| 11 | 12.47.2Providing & fixing UV stabilised fibre glass reinforced plastic sheet rooting upto any pitch, including fixing with polymer coated 'J' or 'L'hooks, bolts & nuts 8 mm dia G.I plain/ bitumen washers complete but excludingthe cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400TEX panel rovings incorporating minimum 0.3% ultra-violet stabiliser in resin systemunder approxirnately 2400 psi and hot cured. They shall be of uniform pigmentationand thickness without air pockets and shall conform to IS 10192 and IS 12866. Thesheets shall be opaque or translucent, clear or pigmented, textured or smooth asspecified.2 mm thick flatNet |
| 12 | 13.48.3Finishing with Deluxe Multi surface paint system for interiors and exteriors usingprimer as per manufacturers specifications:Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture |
| 13 | 13.98.1Wall painting with plastic emulsion paint of approved brand and manufacture to givean even shade:One or more coats on old work |
| 14 | OD73258/2026-2027 Providing and fixing Blinds of best quality to windows etc. including all fittings,labour carrying etc. complete . |
| 15 | LS Amount for Electronics works |
| 16 | Purchasing of furniture |
| 17 | GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender