Tender For Provn Of Open Sheds For Parking And Storage With Allied Infra Alongwith Provn Of Electric Supply, Water Supply And Security Lights Near Solid Waste Management Under Ge Jaipur At Jaipur Mil Stn
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Jul 2026
2 days left
EMD
86420
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Open Sheds For Parking And Storage With Allied Infra Alongwith Provn Of Electric Supply, Water Supply And Security Lights Near Solid Waste Management Under Ge Jaipur At Jaipur Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 2 | Excavation in trenches not exc 1.5m wide and n exc 1.5m in depth, for pipe line, cable trenches, foundation, etc or for shaft , wells, cesspits, manholes, pier holes, etc n. exc 10 Sqm on plan and not exc 1.5m in depth and getting out in any type of soil complete all as specified and directed. |
| 3 | ,---ditto--- all as per item No. 2 above but depth exc 1.5m but not exc 3m complete all as specified and directed. |
| 4 | Excavation over areas n exc 1.5m deep for foundation and getting in any type of soil complete all as specified and directed. |
| 5 | Excavation in post holes (or similar holes) soil each n exc 0.5 cum getting out, returning, filling in and ramming earth around, in layers n.exc 25 Cm, watering and removing surplus soil to a distance n.exc 50m and making good surface in soft / loose complete all as specified and directed. |
| 6 | M&L for PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 7 | Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat with rough finished surfaces of concrete complete all as specified. |
| 8 | Use & waste of form work to sides of square, rectangular or polygon pillars, posts, struts, piers, columns and stanchions etc.and similar work with rough finished surface of concrete complete all as specified and directed. |
| 9 | Use & waste of form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.and similar items with rough finished surface of concrete complete all as specified and directed. |
| 10 | M & L for RCC M-30 (Design Mix) (using 20mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc, basement slabs, under reamed piles and mass concrete complete all as specified and as directedNote : Reinforcement & formwork shall be measured and paid for separately. |
| 11 | M & L for RCC M-30 (Design Mix) (using 20mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directedNote : Reinforcement & formwork shall be measured and paid for separately. |
| 12 | M&L for RCC M-30 (design mix) (using 20 mm graded stone aggregate) as in Columns, pillars, piers, posts and struts and the like complete all as specified and as directed.Note : Reinforcement & formwork shall be measured and paid for separately. |
| 13 | M&L Mild steel TMT bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as directed and specified. |
| 14 | ,--- ditto--- all as per srl item No. 13 above but TMT bar of 6 to 8mm dia complete all as directed and specified. |
| 15 | ,--- ditto--- all as per srl item No. 13 above but TMT bar of 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as directed and specified. |
| 16 | M&L for 100 mm thick PCC 1:4:8, type D-2(40mm graded aggregate) as in sub base finished and fair complete all as specified and as directed. |
| 17 | M&L hardcore of Broken stones or Boulders of gauge exc 63 mm but n exc 100mm, deposited spread and levelled in layers n exc 15 cm thick watered and rolled /rammed to a true surface complete all as specified and as directed. |
| 18 | M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 19 | M&L for Rounding to edges of stones slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed. |
| 20 | M&L for creating grooves in granite slab as per site reqt complete all as specified and directed |
| 21 | M&L sand filling under floors or in foundations including watering, spreading and levelling in layers of 25 mm thick complete all as specified and as directed. |
| 22 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft / loose soil complete all as specified and as directed. |
| 23 | Removing excavated material to a distance n exc 50 m and deposited where directed at a level n exc 1.5 m above the starting point complete all as specified and as directed. |
| 24 | M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick masonry surfaces or concrete surface of wall finished even and fair including mixing of WPC as per manufacturers instruction complete all as specified and directed.Note : WPC shall be measured and paid seperately as supply only |
| 25 | M&L for rendering 10 mm thick in CM 1:4 on fair faces of brick masonry surfaces or concrete surface of wall finished even and fair including mixing of WPC as per manufacturers instruction complete all as specified and directed.Note : WPC shall be measured and paid seperately as supply only |
| 26 | S&F 150 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors or fixed to walls etc with necessary fixing arrangements complete all as specified & directed. |
| 27 | M&L for brick work with sub-class 'B' bricks (using old size bricks), straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed |
| 28 | M&L Firebrick work in linings to fire places, flues, etc. (other than in chimney shafts), set, jointed and pointed in fireclay complete all as specified and directed |
| 29 | M&L for preparation of newly or previously untreated steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 30 | M&L pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws /J hook, L-type crancked hook complete all as specified and directed |
| 31 | S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways;drainage crossings, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 32 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over one coat of primer over 1mm thick wall care putty complete all as specified & as directed. |
| 33 | M&L preparation of newly plastered surfaces of wall & applying applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces of approved shade/tint complete all as specified & as directed. |
| 34 | M & L for 75mm thick PCC 1:3:6 , type C-2 using 40 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed. |
| 35 | M&L for hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed |
| 36 | S&F rolled Mild Steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde E-250) qulaity A including fabrication, erraction and fixing complete all as specified and directed. |
| 37 | S&F mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment and well finished edges conforming to Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed. |
| 38 | S&F mild steel work tubular/rectangular/square) hollow pipes trusses as in truss or vertical posts etc including cutting to size, jointing, welding, making curvature (where ever required) using ERW or induction buttt welded MS tube black confirming to IS: 1161-1979, grade St 240 complete all as specified and directed. |
| 39 | M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 40 | M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described n. exc. 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 41 | M&L for 60mm thick factory made chamfered edge cement concrete paver block (Wetcast flexi paver 200mm x 200mm of 100mm x 100mm size stone finish) of M-40 grade of approved colour (Glossy/ Lacquer) approved design and pettern as in footh path, park lawn, drive ways, floors and vehicle movement areas, parking etc of requird size and shape made by table vibratory method using PU mould, laid in reuqured colour and pttern over sand cushioning layer and filling of joints with sand and cutting of paver blocks as per required size and pattern, finishing and weeping the extra sand complete all as specified and directed by Enginer-in-Charge.Note : Sand cushioning layer shall be measured and paid separately under respective item of BoQ. |
| 42 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 43 | M&L preparation of new concrete/ brick/stone surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of priming paint as in colour code directed by EIC complete all as specified and as directed. |
| 44 | Supply, laying, jointing and testing 50mm bore galvanised steel tubes \\"medium grade \\" (ISI marked) with all necessary fitting (ISI marked) laid in trenches, floors and under roads complete all as specified and directed . |
| 45 | M&L for cutting, threading, drilling hole in existing CI/GI pipe line of size up to 80mm and making arrangement for tapping water connections complete incl GI socket, clamp, nipple and all other accessories reqd and making leak proof connection complete all as specified and directed. |
| 46 | S&F submersible horizontal openwell motor with pump of 5 HP, 3 phase, 20mtr head, discharge 10 to 22 LPS complete with 4sqmm, 3 core flat cable and cable connected from motor to starter, delivery pipe will be connected to main supply line complete all as specified and directed. Please Enable Macros to View BoQ information |
| 47 | S&F submersible horizontal openwell motor with pump of 5 HP, 3 phase, 20mtr head, discharge 10 to 22 LPS complete with 4sqmm, 3 core flat cable and cable connected from motor to starter, delivery pipe will be connected to main supply line complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender