Tender For Special Repair/Replacement Of Gi Windows With Aluminium Windows At Lekhanagar, Ramgarh Cantt
Tender Value
38.82 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
20 days left
EMD
77650
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ramgarh → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair/Replacement Of Gi Windows With Aluminium Windows At Lekhanagar, Ramgarh Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Taking down shutters of any description not exceeding 1.0 Sq m each, and removing from site, complete all as specified and directed by Engr-In-Charge . |
| 2 | Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.0 Sq m each, and removing from site, complete all as specified and directed by Engr-In-Charge . |
| 3 | M&L for framed work such as grills,gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railing; framework of water tanks and similar work conforming to Fe 290- Gde E -165 & for portions framed and hung as gates, including pintle hinges, stops,hand-made sliding bolts, etc.complete all as specified and as directed |
| 4 | S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified & directed. |
| 5 | M & L for 3mm thick plain sheet glass ordinary quality and glazing with oil putty not exceeding 0.50 Sqm in each pane,complete all as specified and as directed by Engineer-in-Charge . |
| 6 | M & L for 3mm thick figured glass ordinary quality and glazing with oil putty not exceeding 0.50 Sqm in each pane,complete all as specified and as directed by Engineer-in-Charge . |
| 7 | M & L for dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 8 | S & F anodised aluminium frame powder coated (minimum thickness of powder coating 50 micron) for doors, window and ventilator shutters, fixed/sliding track two or three track including frames, glazing lips, cleats side hung type without sash bars, fixed window, ventilators etc with one or more rebates including joining cleat for fixng etc complete all as specified and directed. |
| 9 | S & F for powder coated aluminium window , ventilator shutters, with coating layer of minimum 50 micron, Track channel or fixed type without sash bar, aluminum section weighing min 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 10 | S&F in repair 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed all as specified and directed. |
| 11 | S&F in repair 125 mm long aluminium anodised barrel tower bolts of extruded section and fixed all as specified and directed. |
| 12 | S & F Aluminium anodised handles of extruded section and fixed 125 mm long complete all as specified & directed. |
| 13 | S & F anodised aluminium grill (anodised transparent or dyed ot require shade according to IS:1868 with mimimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge. |
| 14 | M&L for prepartion of old painted of steel surface of any description , not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint (ordinary tint) any colour on old steel painted surface complete all as specified & directed. |
| 15 | M&L for prepartion of new or previously untreated steel surface of any description , not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender