Tender For Essential Civil Repair & Maintenance Works Of T.E Building At Shardhna In Meerut Operational Area.
Tender Value
3.64 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
0 days left
EMD
7293
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Essential Civil Repair & Maintenance Works Of T.E Building At Shardhna In Meerut Operational Area.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (a)1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 2 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (a)30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 3 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : (a)250x16 mm |
| 4 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : (a)200x10 mm |
| 5 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : (a)125 mm |
| 6 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. (a)Twin rubber stopper |
| 7 | Providing and fixing 0.5mm thick aluminium sheet on wooden door shutter with screw, nails etc all complete as per direction of engineer in charge |
| 8 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 9 | Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. |
| 10 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : (a)In 75x75 mm deep chase |
| 11 | 12 mm cement plaster of mix : (a)1:6 (1 cement: 6 coarse sand) |
| 12 | 15 mm cement plaster on rough side of single or half brick wall of mix : (a)1:6 (1 cement: 6 coarse sand) |
| 13 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. (a)20 mm cement plaster |
| 14 | Finishing walls with Acrylic Smooth exterior paint of required shade : (a)New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 15 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : (a)Two or more coats on new work. |
| 16 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 17 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. (a)Old work (one or more coats) |
| 18 | White washing with lime to give an even shade : (a)Old work (one or more coats) . |
| 19 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 20 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : (a)Old work (one or more coats) . |
| 21 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :(a)One or more coats on old work. |
| 22 | Finishing walls with Acrylic Smooth exterior paint of required shade : (a)Old work (One or more coat applied @ 0.90 ltr/10 sqm). |
| 23 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. (A)Two or more coats on old work after scrapping work.(Payment of scrapping works shall be paid in separate item). |
| 24 | Applying one coat of exterior primer of approved brand and manufacture applied @ 1.20 Kg/10 Sqm. |
| 25 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. (a)With cement mortar 1:4 (1cement: 4 coarse sand). |
| 26 | Taking out the large peepal tree at roof and walls including root which was embedded in roof at all heights by demolishing the roof tiles or brick wall if required including disposal the tree material and malba out of municipal limit including repair of roof with cement concrete 1:2:4(1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) all complete as per direction of engineer-in-charge.(The item included all labour,T&P,material in above operation |
| 27 | Credit unserviceable brick bats. |
| 28 | Repair of broken Projection /Chajjas by dismantling damaged portion, repair by cement plaster 1:4 (one cement :4 coarse sand )in one or more layerin the interval time all complete as per direction of E-I-C.(Item included labour,material etc, ,scaffolding if required will be paid inseprate item) |
| 29 | Credit to unserviceable aluminium floor door spring. |
| 30 | Credit to unserviciable wooden door. |
| 31 | Credit to MS/GI items. |
| 32 | Credit to unservisiable material recovered from dismantling/demolishing (a) PTMT Bib cock/Stop cock/PTMT Pillar cock/PTMT/Connection pipe/PVC Flushing cystern /water tank |
| 33 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. (a)Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 34 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 35 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. (a)10 litre capacity - White |
| 36 | Providing and fixing PTMT bib cock of approved quality and colour. (a)15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 37 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. (a)With stainless steel cover plate minimum 1.25 mm thickness. |
| 38 | Repairing of aluminium door for smooth functioning all complete as per direction of engineer in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender