Tender For Protection Work Along Left Bank Of Hurhura Channel For A Length Of 2100 M Takipara Bamboo Bridge To Par Bakshi Asram In Mouza : Parbakshi & Takipara , Gp : Kashmoli, Ps : Joypur, Block Amta-Ii, District : Howrah. [ 2Nd Call To The 1St Call
Tender Overview
Project Description
Tender for Protection Work Along Left Bank Of Hurhura Channel For A Length Of 2100 M Takipara Bamboo Bridge To Par Bakshi Asram In Mouza : Parbakshi & Takipara , Gp : Kashmoli, Ps : Joypur, Block Amta-Ii, District : Howrah. [ 2Nd Call To The 1St Call Of Wbiw/Ctu/Ce(W)/E-Nit-42(E)/2025-26 ]
BOQ
| Sl. No. | Item Description |
| 1 | Supplying Jhaw / Eucalyptus bullah piles at work site, including dressing and making one end pointed. 15 cm av. DiameterNote: Diameter of pile to be measured at a distance of 1.5m from the thicker end. |
| 2 | Labour for driving Jhaw / Eucalyptus bullah piles by monkey in all sorts of soil including hoisting and placing piles in position, protecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour for necessary driving appliances and all tackles. 15 cm av. diameter.Note: 1) Payment to be made on the length driven into the ground. Diameter to be measured at 1.5m. from the thicker end.3) For driving done by pile engine set (without staging) under specific instruction of engineering in charge the rates will be enhanced by Rs. 4.00 per meter. |
| 3 | Supplying, fitting and fixing with iron nails half split bullah wailing pieces and cross pieces etc. complete with cost of all materials and carriage to site. Width of thinner end above 10 cm. and less than 15 cm. (i) Jhaw / Eucalyptus. |
| 4 | Coal tarring with 5% pitch including cost of material and labour complete as per direction of the Engineer-in-charge.One coat. |
| 5 | Earthwork in making new embankment / ring bundh/ retired embankment by excavation of earth from borrow pits in all kinds of soil including making berms and depositing the same in layers not exceeding 25 cm. as per profile within an initial lead of 30 metre and lift of 1.5 metre including cost of nicking outlines,dug-belling, putting profiles, cutting and removing thick and thorny jungles, uprooting trees and stumps of all sizes upto 30 cm., girth from the site alignment as per direction of the Engineerin-Charge including dewatering, removal of weeds, carcasses, organic matter etc., if any, breaking clods, rough dressing, watering, ramming, compacting etc. complete. (Work to be executed on section measurement by pre work & post-work level section). Where land for earth owned/arranged by the Department |
| 6 | Extra rate over Item No.5.00 for all kinds of soil for every additional lift of 1.50 metre or part thereof beyond the initial lift of 1.50 metre.Three Extra Lead |
| 7 | Supply of different materials as per approved specification.. (5) Bricks/Jhama/Bats sorted and stacked at site f) Brick bats |
| 8 | Labour charge for dumping / Stone Boulders 25 kg & above / Shingles / Brick Bats, from stack of worksite with all leads and lifts in water or spreading the same on the slope of the bank of River/Sea or the slope of the embankment or in the River/ Sea bed to an uniform thickness as per direction of the Engineer-in-charge including cost of all accessories and other incidental charges. Brick Bats |
| 9 | Making filter with well graded 40 mm down ballasts and laying uniformly behind weep holes, below pitching on bed, side slopes including supply and carriage of all materials to site including preparing bed with earthwork up to 30 cm depth, where necessary and compacting with wooden malllet after laying to achieve designed section as per direction of the Engineer- in - Charge (measurements will be on finished work / in stack after deducting necessary void). d) First class brick ballast |
| 10 | Making rectangular sausage cage with 10 SWG galvanized iron wire of 125mm. x 125mm. mesh wire netting with proper lapping of minimum 150 mm. including sewing the joints with 12 SWG G I wire and supply of all materials and equipments including placing the sausage cage in position, filling the same with boulder or lump agreegates complete as per direction of the Engineer-in-charge but excluding the cost of boulder / lump aggregates and its carriage upto site.(Cost is excluding the cost of end pieces ) i) 1.20 metre x 0.90 metre nominal section |
| 11 | 0.75 metre x 0.45 metre nominal section |
| 12 | Making sausage cage circular in section with 10 SWG galvanized iron wire of 125mm. x 125mm. mesh wire netting with proper lapping of minimum 150 mm. including tying and sewing the joints with 12 SWG G I wire and supply of all materials and equipments including placing the sausage cage in position, filling the same with boulder or lumpagreegates complete as per direction of the Engineer-in-charge but excluding the cost of boulder / lump aggregates and its carriage upto site.(Cost is excluding the cost of end pieces ). 0.75 metre diameter. |
| 13 | Labour charges for launching sausage length above 2.00 metre from boats in proper position and where use of multiple boat is necessary, including hire charges of boat, boatman etc complete as per direction of the Engineer-in-charge Sausage of 0.75 metre diameter. |
| 14 | Supplying, fitting, fixing end pieces for rectangular / square / circular sausages at the ends, with 10 SWG / 8 SWG G I wire net of different mesh sizes tying & sewing the same maintaning a lap langth of 150 mm all around with 12 SWG G I wire complete, including the cost of supply of wire netting,fitting etc, complete as per direction of the Engineer - in - charge. Mesh size 125 mm x 125 mm with 10 SWG wire |
| 15 | Supply of stone boulders at site including cost of material, loading, unloading and carriage and including all incidental charges like Royalty, complete. (Royalty certificate in original from competent authority are to be submitted along with the bill, otherwise amount due towards Royalty of stone / laterite boulder will be deducted from the bills of works.) Panchami source (Each weighing 25 kg & above)Panchami source : Rs. 106 per Cum. |
| 16 | Labour charges for stacking unloaded boulder / shingles to make them convenient for measurement as per direction of the Engineer-in-charge. Boulder of size above 20 KG |
| 17 | Labour charges for bouIder pitching on top and slope by placing required boulders (each weighing 25 Kg. and above within lead of 100 metres and all lifts) including filling the interstices with fragments as required, preparing sub-grade by cutting or filling the earth on slope upto 7.5 cm. depth, watering and ramming where necessary complete as per direction of the Engineer-in-charge.Over Jhama Khoa / metal filter/ Geo-textile filter. |
| 18 | Cutting uprooting and clearing jungles including shrubs, water weeds, bushes, trees, plants, upto 30 cm. girth including removing as directed by Engineer-in-charge. |
| 19 | Excavation for Structures Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge . In all sorts of soil excluding marshy soil & rocks (soft or hard) by manual means.upto 3 m depth Without pumping out water and shoring |
| 20 | Providing & fixing Concrete Sign Board as per IRC specification of size 900 x 750 x 37 mm. thick made with RCC 1:1½:3 with pakur variety stone chips reinforced with double layer IRC febric (75 x 75 mm. mesh) and fixed with necessary nuts & bolts on two RC precast posts 100 mm. x 150 mm. of height 2.65 m. of which top 750 mm. is of section 100 x 13 mm. and 1.90 metre above GL & 0.75 metre below GL including digging hole, repacking the same with cement concrete 1:3:6 with jhama khoa or with local stone chips etc. complete including painting two coats on both faces lettering sign marks etc. as per direction of the Engineer-in-Charge. (The rate is inclusive of cost of reinforcement, concrete, shuttering, nuts & bolts, washer etc. complete.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender