Tender For Special Repair To Existing Building Of Govt Polytecnic College At Kangra Himachal Pradesh (Sub Head:- Repair Of Civil Work And Construction Of Toilet Block (Deposit Work)
Tender Value
24.18 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
0 days left
EMD
48500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Existing Building Of Govt Polytecnic College At Kangra Himachal Pradesh (Sub Head:- Repair Of Civil Work And Construction Of Toilet Block (Deposit Work)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling roofing including ridges,hips,valleys and gutters etc and stacking the material within 50 metres lead of G.I sheet.as per specification, approved drawing design as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within leads, lifts and other inciddentals. Ther ate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 2 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials with in 50 metres lead. as per specification, approved drawing design as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within leads, lifts and other inciddentals. Ther ate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 3 | Dismantling doors, windows and clearstory windows(steel or wood) shutter including chowkhats,architrave,hold fast etc. complete and stacking within 50 metres lead:of area 3 sqm.and below. as per specification, approved drawing design as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within leads, lifts and other inciddentals. Ther ate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 4 | Tacking out existing wooden door shutter,repair by cutting, painting etc and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws,etc.as required. all complete. as per specification, approved drawing design as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within leads, lifts and other inciddentals. Ther ate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 5 | Dismantling old plaster or skirting racking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. as per specification, approved drawing design as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within leads, lifts and other inciddentals. Ther ate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 6 | Demolishing brick work manually/by mechanical means including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead as perspecification, approved drawing design as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within leads, lifts and other inciddentals. Ther ate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 7 | Dismantling tile work in floors and roofs laid in cement mortar including stacking materials wirthin 50 metres lead for thickness of tiles 10mm to 25mm.as perspecification, approved drawing design as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within leads, lifts and other inciddentals. Ther ate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 8 | Providing and fixing 0.60mm thick prepainted steel sheet in roofing TATA with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 9 | Providing and fixing Ridge or hips 0.60mm thick prepainted steel sheet in roofing TATA with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 10 | Providing and fixinf M.s. BP sheet 1.66mm to 2mm thick in eaves board/Facia /soffits/ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete.as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 11 | Providing and fixing plain multipurpose cement board(high pressure steam cured)with suitable screws for cement partical board in ceiling etc. complete (frame work to be paid seperatately)6mm thick cement fiber board as per IS:14862 as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 12 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level,suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross\\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum)sheet, 1200 mm long spaced between main \\"T\\" at 600mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be prepainted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the as per specification, approved drawing design as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within leads, lifts and other inciddentals. Ther ate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 13 | Providing and fixing M.S Tubular frames for doors and windows,ventilators and cupboard with rectangular/ l type section, made of 1.60 mm thck M.s sheet,joints mitred,welded and grinded finish with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer,fixing with carbon steel galvanised dash fastener orr required dia and size to be paid.as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 14 | Providing and fixing glazed shutters for doors, windows and clarstory windowsusing 4mm thick float glass panes, including ISI marked M.S.pressed butt hinges bright finished of required size with necessary screw Second class Teak wood 30mm thick..as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 15 | Providing and fixing glass panes with putty and glazing clip in steel doors, windows,clearstory windows,all complete 4.0mm thic glass panes of modi float,Saint gobind,aashai or its equivalent. as per specification, approved drawing design as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within leads, lifts and other inciddentals. Ther ate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 16 | Providing and fixing fly proof wire guage to windows, clerestory windowa & doors with M.S Flat 15x3 mm and nuts & bolts complete. Galvinised M.S wire guaze with 0.63 mm dia wire and 1.4 mm aperture on both sides. as per specification, approved drawing design as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within leads, lifts and other inciddentals. Ther ate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 17 | renewing glass panes and refixing wooden fillets float glass panes of nominal thickness 4 mm weight not less than 10kg/sqm4.0mm thic glass panes of modi float,Saint gobind,aashai or its equivalent. as per specification, approved drawing design as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within leads, lifts and other inciddentals. Ther ate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 18 | Second class Brick masonry work in common burnt clay(F.P.S)(non modular building bricks in super structure above plinth level to floor any level in cement mortar 1:6 (One Cement is to Six Sand), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 19 | 12 mm (Tweleve milimetre) thick cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering up to all floor level including arises, internal angles, chamfers and rounded angles any girth and finished even and smooth with cement mortar 1:6 (One cement isto Six sand), as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 20 | Applying Birla J.k. white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dirt, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete upto all floor level, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, GST or any other taxes imposed by the Government. |
| 21 | Wall painting (two coats) with acrylic colour emulsion paint of Asian paint/ Dulex paint/ Burger/ Nerolac Paint manufacture of approved shade for interior grade on undecorated concrete/ stone/ plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for making the surface complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 22 | Painting one or more coats on old work Synthetic paint (excluding priming coat) Deluxe Multi Surface paint onsurfaces with enamel paint of Asian/Nerolac/Burger of approved shade brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter, as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge complete including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax, GST or any other taxes imposed by the Government |
| 23 | Finishing with Delux Multi surface paint system for interiors and exterior using primer as per manufacture specifications Painting wood work with delux Multi surface Paint of required shade Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture of Asian/Nerolac/Burgeras per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge complete including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax, GST or any other taxes imposed by the Government |
| 24 | Painting steel work with delux multi surface paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture, as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge complete including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 25 | Painting with oil type wood preservative of approved brand and manufacture old work(one or more coats of ISI marked as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge complete including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 26 | Kota stone slab flooring over 12mm (average)thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab,,including rubbing and poilishing complete as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 27 | Providing and laying in position cement concrete of specified gradeexcluding the cost of shuttering and shuttering All work up to plinth level 1:4;8 1;cement;4sand:8 graded stone aggregate 40 mm nominal size. as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 28 | Second class Half Brick masonry work in common burnt clay building bricks in super structure above plinth level to floor any level in cement mortar 1:4 (One Cement is to Four Sand), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 29 | 6mm (Six millimetres) thick cement plaster to ceiling with cement mortar 1:3 (One cement istoThreeSand) upto all floors level complete, as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, GST or any other taxes imposed by the Government. |
| 30 | Providing and laying 300X300 mm (three hundred into three hundred millimetre) aspartic Ceremic glazed floor tile of NItico/AGL/Simplo/ Orient/RAK/Kajaria/Somany/Johnson/ Bell in skirting,riser of stepson 20mm twenty millimetre) IS:15622 thick cement mortar 1:4 (one cement isto four sand) laid over and jointed with neat cement slurry @3.3 kg/sqmfinished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete within all leads, lifts of materials and other incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government |
| 31 | Providing and laying 300X300 mm (three hundred into three hundred millimetre) aspartic Ceremic glazed floor tile in skirting,riser of step and dado of NItico/AGL/Simplo/ Orient/RAK/Kajaria/Somany/Johnson/ Bell in skirting,riser of steps on 20mm twenty millimetre) IS:15622 thick cement mortar 1:4 (one cement isto four sand) laid over and jointed with neat cement slurry @3.3 kg/sqmfinished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete within all leads, lifts of materials and other incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government |
| 32 | Providing and fixing aluminium work for frame of doors, windows, ventilators and galazed partitions (for fixed portion) of Jindal / Hindalco aluminium with extrusion built up standard tubulars section / appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade with dash fastners of required dia and size, including necessary filling up of gaps at junctions i.e. at top, bottom and sides with required EPDM rubber / neoprence gasket etcetera. Aluminium sections shall be smooth, rust free, staight, mitred and jointed mechnically where ever required including cleat angle, aluminium, snap beading for glazing / panelling C.P. brass / stainless steel screws all complete as per architectural drawings design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 33 | Providing and fixing aluminium work for Shutters of doors, windows, ventilators and galazed partitions (for fixed portion) of Jindal / Hindalco aluminium with extrusion built up standard tubulars section / appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15 with dash fastners of required dia and size, including necessary filling up of gaps at junctions i.e. at top, bottom and sides with required EPDM rubber / neoprence gasket etcetera. Aluminium sections shall be smooth, rust free, staight, mitred and jointed mechnically where ever required including cleat angle, aluminium, snap beading for glazing / panelling C.P. brass / stainless steel screws all complete as per architectural drawings design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 34 | Providing and fixing 12mm thick prelaminated partical board flat pressed three layer or graded wood partical board conforming to IS:12823 Grade I Type II in panelling fixed in aluminium doors,windows shutters and partition frames with C.P brass/sainless steel screws etc. complete as per architectural drawings and pre laminated partical board with decorative lamination on one side and balancing lamination on other side. as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 35 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10 kg/ sqm) all complete as per architectural drawings design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 36 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer- in-charge. (Only weight of grill to be measured for payment) and as per the direction of the Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. |
| 37 | Providing and fixing ISI marked aluminium butt hingess anodized (anodic coating not less than grade AC10 as per IS:1868 transparent or dyed to required colour or shade, with nuts and screws etc. complete 100x75x4mm as per the direction of the Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. |
| 38 | Providing and fixing aluminium sliding door bolts,250x16mm ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete and as per the direction of the Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. |
| 39 | Providing and fixing aluminium tower bolts 250X10MM ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 40 | Providing and fixing aluminium handles, 125 MM ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete and as per the direction of the Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. |
| 41 | Providing and fixing aluminium handles,100 MM ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete and as per the direction of the Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. |
| 42 | Providing and fixing aluminium hanging floor door single rubber stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete and as per the direction of the Engineer-in-charge including carriage of material with in all leads and lifts and other incidential. The rate is including of octroi,royality, Malkana , Toll Tax, GST or other taxes imposed by the Government. |
| 43 | Providing and fixingon wall face unplastiised- pvc moulded fittings/accessories for unplasticised Rigid PVC rain water pipe conforming to IS:13952 Typ-A including jointing with seal ring conforming to IS:5382.leaving 10mm gap for thermal expension Bend 87.5 degree 110 mmSupreme/Reliance/Finolex/Vectus/Astral /Deplastas per specification, approved drawing, design, including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government |
| 44 | Providing and fixingon wall face unplastiised- pvc moulded fittings/accessories for unplasticised Rigid PVC rain water pipe conforming to IS:13952 Typ-A including jointing with seal ring conforming to IS:5382.leaving 10mm gap for thermal expension copular 110 mmSupreme/Reliance/Finolex/Vectus/Astral /Deplastas per specification, approved drawing, design, including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government |
| 45 | Providing and fixingon wall face unplastiised- pvc moulded fittings/accessories for unplasticised Rigid PVC rain water pipe conforming to IS:13952 Typ-A including jointing with seal ring conforming to IS:5382.leaving 10mm gap for thermal expension Bend 87.5 Degree 110 mm Supreme/Reliance/Finolex/Vectus/Astral /Deplastas per specification, approved drawing, design, including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government |
| 46 | Providing and fixingon wall face unplastiised- pvc moulded fittings/accessories for unplasticised Rigid PVC rain water pipe conforming to IS:13952 Typ-A including jointing with seal ring conforming to IS:5382.leaving 10mm gap for thermal expension Shoe (Plain) 110 mm Supreme/Reliance/Finolex/Vectus/Astral /Deplastas per specification, approved drawing, design, including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government |
| 47 | Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs,screwed with M.S screws of required length,including cutting brick work and fixing in cement mortar 1:4 (1cement:4 coarse sand) and making good the wall etc complete-110mm Supreme/Reliance/Finolex/Vectus/Astral D-plast double equal branch of required degree including fixing with approved adhesive etcetra complete, as per specification, approved drawing, design, including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government |
| 48 | Providing and fixing water closet squating pan(Indian type W.C.pan) with 100 mm sand cast iron P ot S trap,10 litre low level white P.V.C. flushing Cistern including flush pipe, Manually controlled device (handle lever)conforming to IS:7231, with all fittings and fixture complete,including cutting and making good the walls and floors wherever required:White vitrous china Orrissa patteren W.C. pan of size 580x440 mm with integral type foot rest. Hind Ware Cera /Somany /Jaquar and its other Eqivlant as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 49 | Providing and fixing white viterous china pedestial tpye water closet MATRIX EWC with jet pressure ( European type) with Jet pressure and ,10 (ten) litre low level PVC dual flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40mm (Forty milimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required of HINDWARE /CERA/JAQUAR of Stat white/Snow white shade including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government. |
| 50 | Providing and fixing white viterous china flat back or wall corner type lipped front urinal basin of HINDWARE /CERA/JAQUAR 430x260x350 mm and 340x410x265 mm size respectively with automatic flushing cistern with standard flush pipe and C.P brass spreaders with brass unions and G.i clamps complte.including paintings and brackets cutting and making good the walls and floors wherever required range of three urinal basin with 10 ltr. white P.V.C automatic flushing cistern as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 51 | Providing and fixing stone slab with table rubbed ,edges rounded and polished,of size 75x50 cm deep and 1.8cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 finished smmoth white Agaria Marble Stone as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 52 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: white Vitreous China Flat back wash basinsize 550x 400 mm with single 15 mm C.P.brass pillar tap of Cera/Hindware /Jal/Jquar as per direction of the engineer in charge, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 53 | Providing and fixing white viterous china pedestial for wash basin completely recessed at the back for the reception of pipe and fittingsas per direction of the engineer in charge, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 54 | Providing and fixing 32mm dia (Thirty two milimetres) diametres P.V.C. (Poly Venyl Chloride) waste pipe Supreme of Finolex/ Reliance and Vectas for wash basin or sink including brass check nut complete including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government. |
| 55 | Providing and fixing 453x357 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm (Six milimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government. |
| 56 | Providing and fixing in trenches high pressure 100 mm (one hundered milimetre)diametre conformng to BS NO.13592-92 (Thirteen thousand five hundred ninety two Ninety two)PVC (Poly Venyl Cnioride) Diplast pipe class B soil , waste and ventialing pipes fixing with adhesive mixture complete of supreme/Kishan/Astral/Finolex. as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 57 | Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 (1cement :2 sand)in S.C.I/C.I pipes 100mm dia pipe as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 58 | Providing and fixing M.S holder bat clamps of approved design to sand cast iron/cast iron (Spun)pipe embedded in and including cement concrete blocks 10x10x10 cm, stone agrrgate 20mm nominal size including cost of cutting holes and making good the walls etc.100mm dia pipe. as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 59 | Providing and fixing bend of required degree with acess door, insertion rubber washer 3mm thick bolts and nuts Sand cast iron S&S as per IS-1729as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 60 | Providing and fixing 100 mm (Hundred milimetre) diametre P.V.C (poly venyl chloride) Supreme/ Finolex/Prince pipe fitting and accessories single for sewerage pipe confirm to IS No. 14735-99 (Fourteen thousand seven hundred thirty five -Ninety nine)Plain bend complete as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 61 | Providing and fixinfg single equal plain junction of required degree 100x100x100mm sand cast iron S&S as per IS-1729 complete as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 62 | Providing and fixing trap of self cleansing with screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors 100mm inlet and 100mm outlet sand cast iron S&S as per IS:1729 as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 63 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes , having thermal stability for hot &cold water supply, including all CPVC plain & brass threated fittings, i/c fixing the pipe with clamps at 1.00 metre spacing. This includes jointing of pipes & fittings with one steps CPVC solvent cement and the cost of cutting chases and makeing good the same including testing of joints complete Concealed work,including cutting chases and making good the walls etc. 15mm nominal outer dia pipes internal work)as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 64 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes , having thermal stability for hot &cold water supply, including all CPVC plain & brass threated fittings, i/c fixing the pipe with clamps at 1.00 metre spacing. This includes jointing of pipes & fittings with one steps CPVC solvent cement and the cost of cutting chases and makeing good the same including testing of joints complete Concealed work,including cutting chases and making good the walls etc. 15mm nominal outer dia pipes External work)as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 65 | Providing and fixing ball valve(Brass) of approved quaility,High or Loe pressuure, with plastic floats complete 15mm nominal bore as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 66 | Providing and fixing water tank make P.V.C. (Poly Venyl Chloride) SINTEX Finolex/Relpipe (Reliance)/ Vectus with tripple layer having capacity of 1000 ( One thousand ) litres each tank ISI 12701 (Twelve thousand seven hundred one) G.I. (Galvanised Iron) necessary fittings including over flow pipe scour pipe etectera for inlet and outlet and inside connection 15mm (Fifteen milimetre) nominal bore ball valve and P.V.C. (Poly Venyl Chloride) cover with locking arrangements including placing with all height above ground level complete in all respect and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 67 | Providing and fixing 15mm dia (fifteen milimetre) diametre C.P.(Chromium Plated)brass of prayag/Hindware /cera bib cock with capstan head complete,as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 68 | Providing and fixing 15mm dia (fifteen milimetre) diametre C.P.(Chromium Plated)brass of prayag/Hindware /cera Stop Cock (concealed) complete,as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 69 | Providing and fixing 15mm dia (fifteen milimetre) diametre C.P.(Chromium Plated)brass of prayag/Hindware /cera Extension Nipple size 15mmx50mm complete,as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 70 | Providing and fixing125mm dia (one hundred twenty five milimetre) diametres(circule type C.P.(Chromium Plated) Grating of Paryag/Hindware/cera for gully floor or Nahni trap, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 71 | Providing and fixing C.P.Soap Dish Holder having length of 138 mm, breadth 102 mm, height of75 mm with concealed fittings arrangements, weighing not less than 106 gms.as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender