Tender For City Sanitation Action Plan (Csaps) Mc Theog Distt. Shimla (H.P) For Used Water Management Of Sbm- (U) 2.0- Reg. (Sh:- Providing, Laying, Jointing And Testing Of Di (Spun) Pipes 150 Mm Dia In Sewer Network
Tender Value
1.15 Crore
Estimated cost
Bid Submission
24 Jul 2026
3 days left
EMD
1.90 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for City Sanitation Action Plan (Csaps) Mc Theog Distt. Shimla (H.P) For Used Water Management Of Sbm- (U) 2.0- Reg. (Sh:- Providing, Laying, Jointing And Testing Of Di (Spun) Pipes 150 Mm Dia In Sewer Network
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation(trenches for laying of pipes and M/holes chamber) upto all depths in all classification of earth work such as pick work, jumper work, blasting soft/hard rock or chieselling soft/hard rock where blasting is prohibited, cutting of matelled bitumenous roads / pucca C.C pavements i/c saturated soil/ bailing or pumping out water in all lifts including trimming and dressing of sides,levelling of beds to correct grade including shoring, strutting, planking, timbering and dewatering wherever required, stacking the useable and un-usable material/soil separately and after laying, jointing and testing of pipes returning the useable soil to trenches in 15cm (fifteen centimeters)layers including consolidating of each deposited layer by ramming and watering and then disposing of all surplus excavated soil,un-usable materials as directed within all leads and lifts including restoration of un-metalled surfaces to its original condition and also including cost of diversion of traffic, night signals,fixing caution boards,providing temporary crossing over trenches for access to houses,fencing etc.complete in all respects within all leads and lifts as per the directions of Engineer-in-charge. |
| 2 | Providing and Laying in trenches 150 MM dia cetrifugally cast ductile iron(spun) pressure pipe with socket & spoigot ends confirming to BIS 8329/2000 in standards lenghts 4 Mtrs, 5 Mtrs,5.5 Mtrs & 6 Mtrs for classification Class K-7,suitable for Tyton ( push on joints )( Rubber gasket D- jointing) with cement mortor linging inside the pipes including Bends of all degrees, tees, collers, tapers ( if required) crosses, short pieces,tail pieces, plugs of required numbers, cuttings of pipes, chamfering where required ( Earth work intrenches and jointing of pipes to be measured & paid for separately) including carriage in all leads and lifts complete in all respects to the best satisfaction of the Engineer-in-Charge of the following nominal diameters. |
| 3 | 150mm dia |
| 4 | Providing and jointing tyton ( push on Joints ) to ductile pipe and fitting including testing of the joints, costof rubber gaskit quality conforming to IS 12820 ( Latest edition / amendments ) complete in all respects within all leads and lifts as per directions and satissfacation of the Engineer -In- Charge. |
| 5 | 150mm dia |
| 6 | Providing & laying cement concrete 1:4:8 (1 cement :4 sand:8 graded stone aggrtegate 40 mm dia) and curing complete excluding cost of form work in foundation and plinth including entire carriage of material with in |
| 7 | Providing & laying cement concrete 1:1.5:3 (1 cement :1.5 sand:3 graded stone aggrtegate 20 mm dia) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in :- |
| 8 | Foundation and plinth including entire carriage of material with in all leads and lifts as per the direction of Engineer-in-Charge |
| 9 | Walls (any thickness but not less then 1.10 metre thickness attached pilasters, buttresses, plinth & string courses etc from top of foundation level upto floor two level including entire carriage of material with in all |
| 10 | Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor two level. |
| 11 | Providing from work whth steel plates 3.15 mm thick welded with angle iron frames 30x30x5 mm so as to give fair finish including centering, shuttering strutting and propping etc with wooden battens and Ballies height of propping & centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for insitu-reinforced concrete and plain concrete work in:- |
| 12 | a)Vertical surfaces such as walls (any thickness) partitions and the like including attached pilasters, buttresses, plinth and sting courses and the like including carriage of material with in all leads and lifts as per the direction of the Engineer-in-Charge. |
| 13 | b)Flat surface such as soffits and suspended floors, roofs, landing and the like edge of slabs and breaks in floors and walls (under 20 cm wide) including carriage of material with in all leads and lifts as per the direction |
| 14 | Providing Tor steel reinforcement for R.C.C work including bending, binding & placing in position complete upto floor two level including carriage of material with in all leads and lifts as per the direction of the Engineer-in-Charge. |
| 15 | Providing and fixing SFRC manhole from and cover confirming to ISI - 12952 latest with upto date amendment of following dia and class:- |
| 16 | 560mm dia 35 EHD (Frame cast iron & cover SFRC) including carriage of material with in all leads and lifts as per the direction of Engineer-in-charge |
| 17 | DI Fitting Duly ISI Marked as per IS: 9523-2000 (K-12) (PN-10) |
| 18 | All Socket Y TEE 150X100 mm |
| 19 | DI Plug 150 mm |
| 20 | DI Plug 100 mm |
| 21 | Providing and jointing tyton ( push on Joints ) to ductile pipe and fitting including testing of the joints, costof rubber gaskit quality conforming to IS 12820 ( Latest edition / amendments ) complete in all respects within all leads and lifts as per directions and satissfacation of the Engineer -In- Charge. |
| 22 | Rubber Gasket 150mm |
| 23 | Rubber Gasket 100mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender