Tender For Construction Of Multipurpose Community Hall At Mankota Village
Tender Value
Ref. Documents
Estimated cost
Bid Submission
22 Jul 2026
6 days left
EMD
50000
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Upper Siang → Arunachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Multipurpose Community Hall At Mankota Village
BOQ
| Sl. No. | Item Description |
| 1 | Sub heads and Items of Work |
| 2 | Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in15 cm layers when required, into plinth, sides of foundation etc consolidating each depositedlayer by ramming and watering and then disposing of all surplus excavated soil as directedwithin a lead of 50m. |
| 3 | Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete |
| 4 | Providing and laying in foundations and plinth cement concrete 1 : 5 : 10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering |
| 5 | Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 6 | Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surfaceM20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 7 | Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give smooth surface.M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 8 | Centring and shuttering including strutting, propping etc and removal of form work for :Foundation, footings, bases of columns etc. and mass concrete. |
| 9 | Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height). |
| 10 | Lintels, beams, girders, bressumers and cantilevers etc. |
| 11 | Column, pillars, posts and struts etc. |
| 12 | Reinforcement of RCC work including bending, binding and placing in position complete.Mild Steel |
| 13 | Tar/TMT Steel. |
| 14 | Brick work with best available local bricks in foundations and plinth in cement mortar 1:6 (1 cement : 6 fine sand). |
| 15 | Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level. |
| 16 | Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position. |
| 17 | Providing best available local wood (Class - B II) work in frames of false ceiling, partitions and trusses etc, sawn and put up in position. |
| 18 | Providing and fixing 38 mm thick wire gauge shutters using galvanized mild steel wire gauge of IS gauge designation 140G with wire of dia 0.56 mm for doors, windows and clerestory windows including anodized aluminum butt hinges with necessary screws. a) Best available local wood class B-I |
| 19 | Providing and fixing best available local wood glazed shutters for doors, windows and clerestory window using 7.5 kg/Sq.m. (3 mm thick glass panes) including black enamelled MS butt hinges with necessary screws.35 mm thick |
| 20 | Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal |
| 21 | Providing and fixing MS grills of required pattern in wooden frames of windows etc with MSflat, square or round bars with round headed bolts and nuts or by screwsplain grill. |
| 22 | Providing and fixing MS sliding door bolts, bright finished or and black enamelled with nuts and screws etc complete.300 x 16 mm |
| 23 | Providing and fixing MS handles with necessary screws etc complete.125 mm |
| 24 | 100 mm |
| 25 | Providing and fixing MS Hooks and Eyes.200 mm |
| 26 | Providing and fixing 2.50 cm thick approved local wood eaves boards 23 cm wide with necessary mouldings etc. |
| 27 | Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete |
| 28 | Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately). |
| 29 | Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement.40 mm thick |
| 30 | Providing and fixing Durashine zinc-Aluminium alloy coated (TATA Bluescope building product) sheet roofing fixed with necessary fasteners and lapping method as described by the manufacturer inclusive of cutting hoisting and fixing complete, excluding the cost of purlins, rafters and trusses.0.63 mm thick sheet |
| 31 | Providing ridges or hips 60 cm overall in zinc-Aluminium alloy coated sheet fixed with galvanised iron J or L hooks, bolts and nuts 8 mm dia. and bitumen washers complete. 0.63 mm thick sheet |
| 32 | Providing and fixing 4.0 mm thick asbestors plain sheet ceiling of approved quality with necessary nails etc.complete (frame work for base to be paid separately). |
| 33 | Providing and fixing plain, square edged wooden beading 38 mm x 12 mm section with screws of approved quality for ceiling.Best local approved quality wood. |
| 34 | Extra for making chamfered edges of beading. |
| 35 | 12 mm cement plaster 1 : 4 (1 cement : 4 fine sand). |
| 36 | Neat cement punning. |
| 37 | Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work including priming coat of whiting to give an even shade. |
| 38 | Applying one coat of distemper primer of approved brand and manufacture on wall surface |
| 39 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 40 | Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade. |
| 41 | Applying priming coat with ready mixed primer of approved brand and manufacture on steel work. |
| 42 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade |
| 43 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade. |
| 44 | Painting two or more coats on GI sheets with superior ready mixed paint of approved brand and manufacture in white, grey or green shades on new work to give an even shade. |
| 45 | Construction of cement concrete drain 15 cm wide and 15 cm deep in cementconcrete 1 : 3 : 6 |
| 46 | 12.5% of total civil work for ectrification |
| 47 | Carriage for Cement / Steel and other Engg materials from Likabali to nearest road side of work site by mechanical means lead = 439.00 km |
| 48 | Carriage for Sand / shingle/ aggregate from nearest quarry to work site by tractor lead = 25.00 km Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender