Tender For Construction Of Parking No. 6 For Tts Near Karal Junction At Jnpa.
Tender Value
19.79 Crore
Estimated cost
Bid Submission
12 Aug 2026
19 days left
EMD
46.72 Lakhs
Bank guarantee accepted
Document Fee
23600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raigad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Parking No. 6 For Tts Near Karal Junction At Jnpa.
BOQ
| Sl. No. | Item Description |
| 1 | Providing earthwork in embankment with approved materials obtained from other sources upto lead of 10 Km. including all lifts, breaking clods, dressing to the required lines, curves, grades & section, etc. complete (Material obtained from Other sources) |
| 2 | Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. |
| 3 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 4 | Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete. |
| 5 | Providing and erecting chain link fencing 1.6M.height withG.I.chainlink of size50 x50mm, 8gauge thick and fixed 75mm above ground level on vertical M.S.Angles of 40 x 40x 6mm size, includind excavating pitsf or foundation and embeddedin C.C. blockof 1:4:8 mix of size 450 x450 x670 mm. at 1.75M.c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30cmc/c with nuts and bolts and horizontal M.S. Anglesat topand bottom of 25x25x5 mm size and verticalM.S. flat35x5mm and 25x5mm horizontal including cross support of 40x40x6 mm angles both side at every corner or bendembeddedin concrete blocks of 1:4:8 of size 450x 450x670 mm including 3 coats of oil painting etc. complete. |
| 6 | Providing dry rubble stone pitching 23 cm (about 9 ) thick including all material, quarry spalls, labour etc. complete. |
| 7 | Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. |
| 8 | Providing rubble filling of trap /granite /quartzitegneiss stones for foundations including filling voids with sand/grit and compaction etc complete. |
| 9 | Providing, laying, spreading and compacting stone aggregatesof specificsizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite typeof screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller. to the required density. By Mechanical Means-Grading I (Using Screening Type A (13.2) mm Aggregate) |
| 10 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite typeof screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means-Grading II (Using Screening Type B (11.2 mm) Aggregate) |
| 11 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/ quartzite/ gneiss metal for coping to plinth or parapet, moulded orchamfered as perdrawing or as directed including steel centering, plywood/ steel formwork compacting, roughening themif special finish is to be provided, finishing un even and honey combed surface and curingetc. complete. TheCementMortar 1:3 plaster is considered for rendering uneven and honey combed surfaceonly. Newly laid concrete shall becovered by gunnybag, plastic, tarpaulinetc. (Wooden centering willnot be allowed.) With fine aggregate (Crushed sand VSI Grade |
| 12 | Providing and laying Cast in situ/ReadyMix cement concrete M-25 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforce ment andstructural steel)etc. complete, with fully automatic micro process or based PLC with SCADA enabled reversible DrumType mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 13 | Providing and laying Cast in situ/ Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying / pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding rein forcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible DrumTypemixer/ concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crusheds and VSI Grade) |
| 14 | Providing and fixing in position HCRM / CRS (Corrosion Resistant Steel) bar rein forcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detaileddesigns, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 15 | Providing second class Burnt Brickmasonrywith conventional/ I.S. type bricks in cementmortar 1:6 in foundations and plinth of innerwalls/ in plinth externalwalls including bailing out water manually, striking joint so nunexposed faces, raking out joints on exposed faces and watering etc. Complete. |
| 16 | Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cementmortar 1:6 in super structure including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 17 | Providing and laying Cast in situ/ Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to givea smooth and even surface orrougheningifspecial finish is to be provided and curing etc. complete, (Excluding rein forcement and structural steel). with fully automatic micro process or based PLC with SCAD A enabled reversible Drum Typemixer/ concrete Batchmix plant (Panmixer) etc. complete.With fine aggregate (Crushed sand VSI Grade) |
| 18 | Providings and faced plaster externally in cementmortar using approved screenedsand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using water proofing compound at 1 Kilogram percement bag curing the same fornot lessthan2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mmthick incementmortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. |
| 19 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, inallpositions including scaffolding and curing etc. complete. |
| 20 | Providing and fixing colour coated Zincalume( R ) AZ150 ( min 150 gms/ sq.mt. total one ach side)profiled sheets forroofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT)(0.5 mm TCT), Hi-strength steel with min. 550 M Payield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc1.6%silicon)with COLORBOND (R) steel quality superdurable polyester paint coat (withinorganic pigment). The paint shall have a total coating thickness of nominal 35 um,comprising of nominal 25 umexterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheets hall have nom.950 1050mm effective cover width and nominal 25-30 mm deep ribswith subtle square fluting in the five panat nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details markeda regular interval. Including fasteners with min. fastened with min. 25 umZinc-Tin alloy coated, Hex head, self-drilling screwetc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) |
| 21 | Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4including cement float, filling joints with neat cement slurry, curing, moulding edges, polishing, cleaning complete. b) Granite |
| 22 | Providing and laying machine cutmachine Polished Kota stone flooring 25mm to 30mm thickand requiredwidth in plain/ diamond pattern on bed of 1:6C.M. including cement float, filling joints withne at cement slurry, curing, polishing and cleaning etc. complete. |
| 23 | Providing and fixing rolling shutter fabricated from steel lath so f minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35x35x5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300x 300x 3.15 mm minimum size and shape with squarebar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheetnot less than 0.9 mm thickness and of any size at top and safetydevices including mechanical gear operation arrangement consisting of worm gear wheels and worm so fhighgrade cast iron or mild steel and one coat of red leadprimer etc. complete. (I.S. 62481979) (Without mechanical gear) |
| 24 | Providing and applying plastic emulsion pain to fapproved quality, colour and shadetoold and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete. |
| 25 | Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat, scaffolding if necessary , and watering the surface for two days etc complete |
| 26 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaningoil, grease, dirt andother foreignmatter and sand paperingas required etc. complete. |
| 27 | Providing and fabricating structural steelwork in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, bracesetc. and includingonecoat of anticorrosive paintand overit two coat so foil painting of approved quality and shadeetc. complete. |
| 28 | Providing and fixing inposition (as per1868 / 1982 Alluminiums liding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilo gram/One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight .070 Kilogram/ One Running Metre.. To pand side track section 92x 31.75x1.30 mm at weight 0.933 Kilogram /Runningmetre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram / One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Runningmetre. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram / Running metre. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixture sand fast enings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box. |
| 29 | Providing 25 mm to 30mm thick partition of polished black kadappa stone slab of approved quality including giving required size and shape etc.Fixing in cementmortar 1:3 curing and cement etc. complete. a) One side polish |
| 30 | Providing and fixing on walls/ceiling/floor 20 mmdia. CPVC pipe with necessary fittings, remaking good the demolished portionetc. complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete |
| 31 | Providing and fixing on walls/ ceiling/ floor 25mm dia. CPVC pipe with necessary fittings, remaking good the demolished portionetc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete |
| 32 | Providing and fixing screw down for 20 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. |
| 33 | Providing and fixing White Glazed Earthen ware full stall typeUrinalwith P.V.C. flushing cistern of 5liter scapacity with fitting, in let pipes and stoptap, brackets forfixing thecistern, 32mm dia.P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall |
| 34 | Providing and fixingwhite glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/ cold and hotwater pillar tap brackets, rubber plugs and brass chain, stoptap and necessary pipe connections including P.V.C. waste pipeand trapup totheoutside faceof thewall. Making good the damaged surface, testingetc. complete. |
| 35 | Providing and fixing 10 cm PVC nahani trap with grating etc. complete |
| 36 | Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering frominsideandC.I. lidcover of 75 Kilogram with lid and frame fixed in cement concrete. |
| 37 | Providing and fixing hume pipe septic tank 900 mm dia meter with vent pipe and cap including necessary (including excavation and laying |
| 38 | Providing soak pit of size120 cm x 120 cm x 120cm including excavating and filling with brick-bats |
| 39 | Providinga nd fixing 450mm x 550 mm size superior type Belgiummirr or with 16mm dia. nickel plated towel rod etc. complete. |
| 40 | Providing, layingand fixing P.V.C. pipe of 110mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trenchfillingetc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 41 | Providing and fixing 1 st class white glazed earthen ware Orissa Type W.C. Pan 580mm dia including PorStrapcast ironsoil and vent pipe upto the outside face of thewall (1:5:10)cement concrete bedding 15 mm thick,10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete. |
| 42 | Providing and fixing H.D. P container one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories suchas inlet, outlet overflowof all tanks capacity above 1000 to 20,000 litres |
| 43 | Providing and fixing C.P. pillar cock long neck with aerator of approed make including necessary sockets/union nut etc. complete. |
| 44 | Providing and fixing C.P. Angular stop clock with wall flange of approved make continental including necessary sockets/ union nut etc. complete. |
| 45 | Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, off sets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. ormasonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All theP.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. |
| 46 | Providing, laying and fixing, jointing Eco-drain 200mm SN4 Nu- Drain Upvcpipes or of equivalent make, manufacture as per EN13476 or equivalent asper I.S.15328 with fittings such a bends, tees tees, coupler etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated materialetc. complete. |
| 47 | Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete |
| 48 | Providing and fixing in position powder coated aluminium louvered windows/ ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38mmx 1.22mmbox type, 5mmthick sheet glass louvers, of approved quality etc. complete. |
| 49 | Providing and fixing M.S. grill door 24Kilogram/ One Square Metre of various size as per detailed drawings with out hotdip coating, iron fixtures and fastening sand 3 coats of oil painting etc |
| 50 | Providing and laying ceramic tiles having size 30 cm. x 60 cm. confirming to corresponding I.S. for dadoandskirtingin required position with ready made adhesive mortar of approved quality on plasterof 1:2cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete |
| 51 | Providing and laying matt finish ceramic tiles of having size 30cm x 30cm confirming to I.S. 15622/2006 (groupDII-A) and 7 to 8 mm thick for flooring in required position laid onabed of 1:4 cementmortar including cement float, filling joint with white/ colour cement slurry cleaning curing etc. complete. |
| 52 | Providing water proof bedding for flooring of Bath and WC 25mm thick in C.M.1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for perbag of cement includingl eveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete. |
| 53 | Providing and fixingC.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete. |
| 54 | Providing and laying in trenches 100 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 14.74 Kilogram/ metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 55 | Providing and fixing valley gutter of 22 B.W.G.(0.8mm)plain galvanised iron sheets 120 cm wide with teakwood planking 20mm thick including two coats of coal-tarring the upper surface of plank etc. complete. (excluding painting to underside of plank). |
| 56 | Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. |
| 57 | Providing earthwork in embankment with approved materials obtained from departmental land upto lead of 5.0 Km. including all lifts, , dressing to the required lines, curves, grades & section etc. complete ( Material obtained from departmental Land) |
| 58 | Providing earthwork in embankment with approved materials obtained from departmental land upto lead of 9.0 Km. including all lifts, dressing to the required lines, curves, grades & section etc. complete ( Material obtained from departmental Land) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender