Tender For Providing Mechanical And Electrical Works For Kitchen At Postgraduate Hostel, Anushaktinagar, Mumbai-94.
Tender Value
1.48 Crore
Estimated cost
Bid Submission
10 Aug 2026
26 days left
EMD
2.97 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Mechanical And Electrical Works For Kitchen At Postgraduate Hostel, Anushaktinagar, Mumbai-94.
BOQ
| Sl. No. | Item Description |
| 1 | Walk in cooler with SS racks having size 2100 mm X 2100 mm X 2300 mm height. Frame Material: SS 304 - 20 SWG Material Paneling Construction For Wall And Roof SS Panels : 120 mm Thick Panels With Puf Insulation. Door : Front Door 36” Wide Hinged To The Main Frame With Lock And Key Facility, heavy duty hinged door.Bottom Flooring - 5mm thick Aluminmium chequred plate.Temperature (+) 20C to (+) 4C Compressor Unit : As per room size and make M/s Bluestar With Digital Temp Controller Mountated Out Side The Unit For Better Operation. Construction: On Site Construction / Erection Will be at Supplier's End . Warranty : 1 Years On The Compressor And One Year Full On Site Warranty On All Parts Including Electrical And Mechanical Parts / Members. SS Storage Shelf Qty- 2 Nos.: Size : 1500mm X 600mm X1600mm HtNo of Shelf : 4 Nos.Material : SS 304, 16 SWG. 30mm x 30 mm Sq Tube For Shelf. Each Shelf Should Be Neatly Fabricated With Sq Tubes, All The Tubes Should Be Spaced Equally Width Wise With Minimum 20mm Gap.No of Shelf : 4 Nos. Including Top And Bottom Shelf.Upright Legs : SS 304, 16 Swg , 6 Legs 40 mm x 40mm Sq Tube With Nylon Bullets |
| 2 | SS body vertical deep freezer 500 litres storage capacityWorking temp : 0 C To - 15 C digital temp controllerFrame Material : SS 304 Material 22 SWG Paneling Construction For Wall And RoofSS Pannels : 63 mm Thick Panels With Puff Insulation. Door heavy duty : Two Door 24” Wide Hinged To The Main Frame With Lock And Key Facility . Compressor Unit : Compressor Unit to be fitted on top of M/s Complant Emersion Make With Digital Temp Controller at the top for better operationWarranty : 1 Years On The Compressor And One Year Full On Site Warrantty On All Parts Including Electrical And Mechanical Parts / Members such as gas recharging .Shelf : SS grill type, SS 304 - Qty. 02 nos. |
| 3 | FRP Body Horizontal deep freezer (400/500) liters storage capacityWorking temp : (0 C to -15 C digital temp controllerFrame Material : FRP Body with castor wheels for easy movementPanels : 63 mm Thick Panels With Puf Insulation. Top door : Hard top door with lock and key facility.Top opening.Compressor Unit : Compressor Unit of M/s Complant Emersion make With with temperature controller.Warranty : One year full on site warranty including compressor and other moving parts Make - Voltyas, Western, Blue Star. |
| 4 | SS storage bin with trolley 120 litres capacityMaterial : SS Heavy duty square shape with lid.20 guage 304 SS all material |
| 5 | PVC pallets for storing SS drum (1400 x 1200 x 150mm )Material : Injection moulded HDPE heavy duty type material, blue / black etc. colour, rigid construction. |
| 6 | PVC pallets for storing SS drum (1200 x 1000 x 160mm )Material : Injection moulded HDPE heavy duty type material, blue / black etc. colour, rigid construction. |
| 7 | SS shelf for storing food grains/vegetables of size 1500 mm x 600 mm x 1800 mm height.Frame : SS 304,16 swg sq tubeUp right legs : 40mm x 40mm x 16 swg with nylon bullets Shelf : Four shelf , SS 304, 16 swg , 30mm x 30mm sq tube welded width wise having a gap of minimum of 50 mm between two members . |
| 8 | SS cupboard for storing masala items of size 1000 mm x 520 mm x 1800 mm height.MATERIAL : Outer body fabricated out of ,SS 304, 18 swg sheet metalDoors : Twin doors with window opening On Three Sides , heavy duty handle and lock facilityShelf: Five shelf, fabricated out of SS 304, 18 swg sheet metal and with runner supports duly supported with adjustable type supports .Window : See through windows from three sides , made out of 5 mm thick Acrylic glass (prefix sheet) neatly Fitted with rubber gaskets. Finish : All corners to be duly finished in matt buffingLegs : SS 304 material with SS levelers. |
| 9 | SS table with under shelf of size 1200 mm x 600 mm x 850 mm height.Top : 16 Swg, SS 304 Frame : SS 304,16 Swg Sq TubeShelf : Two Shelf At Equal Distance 18 SWG SS 304Side Cover : 20SWG, SS 304 From Three Sides Front Door With Arylic Window : Front Sliding Doors 18 Swg, SS 304Up Right Legs : SS 304 16 Swg Fitted With Nylon Bullets |
| 10 | Plastic Crate: Outer Dimension: 600(L) x 400(B) x 320(H) MMInner Dimension: 565(L) X 365(B) X 315(H) MMM/s Neelkamal Make or Equivalent |
| 11 | SS Onion potato rack of size 1600 mm X 750 mm X 850 mm height.Frame : SS 304, 30 mm x 30 mm 16 SWG Square Tube.Door : SS 304,16 SWG 2 doors with handle top opening for onion and potato separately.Bottom support : SS 304,16 swg plain sheet. welded angular towards the outlet sproutVerticle SS Rod 4mm thick space between two members 25mm Outlet/sprout : SS 304,18 swg sliding type .Upright legs : 40mmx40mm,sq tube SS304,16 SWG, four legs with adjustable type nylon bullets . |
| 12 | LPG three burner cooking range of size 2200 mm X 750 mm X 750 mm height +150 mm splash backTop : SS 304 , 16 Swg With 50mm Beading from all sides with 5 mm thick MS Angle Under The Top with two supports.Under frame for top : SS 304 16 swg, 40mm x 40mm sq tube duly welded.Up Right Legs : 6 Nos, SS 304, 16 SWG 40 mm X 40 mm, With Nylon Bullets and SS Pipe as cross bracing 25 mm x 25 mm square pipe SS 304 16 SWG, .Spill Tray : Three Nos ,SS 304 18 Swg, 450mm WidePan Support Ring : Heavy Duty Cast Iron Pan Support s of 450mm x 450mm. With 6 Legs .Burners – 3 nos : Model no G-10, working pressure 900-1200 Gms/cm2 . Rated heat output 17650 Kcal/hr. The Burner With Stand To Kept on Separate frame/platform fabricated out of 16 swg, SS 304 sheet metal only. LPG Manifold : MS seamless pipe ,1” C Class 3.4 mm thick , With1/2”x 3/8” BSP brass adaptor on both side .Side Covers : SS 304 ,18 Swg With Louvers From All Side. Duly Fitted To The Frame With 8mm dia SS Nut And Bolts All Sides Should Be Removable Type Needle Control Valve : Brass ½”X 3/8 “ Needle Control Valve For Each Burner with copper pigtail. |
| 13 | LPG stove with single burner of size 700 mm x 700mm x 650 mm height + 100 MM splash backTop : SS 304,16 swg with under supports .Up right legs : 4 nos ,SS 304, 16 SWG 40 mm x 40 mm, with nylon bullets Side frame : 18 swg, SS 304. With front frame of opening type.Spill tray : One no, SS 304 18 swg, 400mm widePan support ring : Heavy duty Cast iron pan support ring of 450mm x 450mm.Burner : Model no G-11,working pressure 900-1200 gms/cm2 . Rated heat output 17650 Kcal/hr.The Burner With Stand To Kept On Separate Frame fabricated out of 16 swg SS 304 sheet metal.LPG Manifold : MS ,1” C class pipe with 1/2X3/8 brass adaptor on bothSide covers : SS 304 ,18 swg with louvers from all side. Needle control valve : Brass ½”x 3/8 “ needle control valve for each burner , 5 feet long 3/8x3/8 suraksha pigtail to be provided with each unit. |
| 14 | Tilting type milk boiler of 120 litres capacity per charge.Over all dimensions : 1200mm x 1200mm x 1200mm height excluding height of handleMain vessel with lid and handle : SS 304, 14 swg jacketed vessel with discharge sprout. Approximate size : ID 600mm x 500 mm deep with dish type bottom. Bottom dish not less than 3mm thick .Outer Vessel for thermal insulation : SS 304, 16 swg outer vessel fitted with 40 mm thick thermal insulation approximate size :OD 710mm. The outer vessel should have 100mm dia x 200mm escape chimney for hot flue gases at rear side for safe operation Frame : SS 304,16 swg fabricated out of 50mmx 50mm sq tube Up right legs : 4 nos ,SS 304, 16 SWG 50 mm x 50 mm, with nylon bullets LPG Burner – 1 nos : M50 or Model no G-11,working pressure 900-1200 Gms/cm2 . Rated heat output 17650 Kcal/hr. The Burner With Stand To Kept On Separate Frame fabricated out of 16 swg SS 304 sheet metal. ½”x3/8” needle valve to be provided.Manifold : MS ½” C class pipe with ½”x 3/8” BSP brass adaptor with 3/8”x3/8”BSP, 5 feet long Suraksha hose to be provided.Tilting Mechanism : SS 304, 40 mm dia shafts,Two bearing supports duly fabricated out of SS 304 material with operating handle . SS Locking Pin with chain for safe operation to be provided . |
| 15 | SS LPG Bulk fryer of overall dimensions 850 mm x 850 mm x 800mm height.Oil holding Capacity : 25- 30 liters maximumSS kadai (SS 304) : OD 710 mm, SS 304 heavy duty, 10 swg round duly finished with handle on both sidesOuter vessel : SS 16 swg ,SS 304 with flue out let for escaping of hot gases. and door opening for ignition of burner with watch glass.Lid : SS 16 SWG, SS 304 duly finished with handleBurner with manifold system : Model no G-11, 300 mm length, ,working pressure 900-1200 gms/cm2 . Rated heat output 20000 Kcal/hr.The Burner With Stand To Kept On Separate Frame fabricated out of 16 swg SS 304 sheet metal.Manifold system : MS ½” BSP, “C” Class pipe with ½”x3/8” needle valve and 3 feet long suraksha hose Upright Legs : 4 nos ,SS 304,16 swg with SS shoe padas, |
| 16 | SS LPG tilting brat pan of size 1000mm X 900mm X 750 mm height + HandleMain Pan (SS 304 ,14 swg) : 660mm x 500mm x 310mm deep with rounded corners and spill sprout 150mm wide. SS 304, 14 swgLid and Handle : SS 304 ,16 Swg Handle With Self Weight And Handle Frame : SS 304,50mmx50mmx16 Swg , Heavy Duty Frame duly welded and finished.Burner : Model no G-11, 230mm length, working pressure 900-1200 gms/cm2. Rated heat output 17650 Kcal/hr.The Burner With Stand To Kept On Separate Frame fabricated out of 16 swg SS 304 sheet metal.Tilting Arrangement : Tilting Arrangement With Gear And Operating Handle Fabricated Out Of Cast Iron Material . Needle Control Valve : Brass ½”X 3/8 “ Needle Control Valve For Each Burner , 3/8\\"x3/8\\" BSP 5 feet long sukrasha pigtail to be provided . |
| 17 | SS Tilting type rice boiling unit of 120 litres water capacity.Main vessel : ID 610mmx550mm deep, seamless with dished bottom, SS 304 14 swg with 3 mm thick dish bottom.Robust construction.Frame : SS 304,16 swg sq tubeSupporting legs : SS 304,16 wg sq tube 50mmx50mm with flat legs LPG Burner : M50 /Model no G-11, 300mm length, working pressure 900-1200 gms/cm2 . Rated heat output 25200 Kcal/hr. The Burner With Stand To Kept On Separate Frame fabricated out of 16 swg SS 304 sheet metal. 3/8\\"x3/8\\"BSP 5 feet long pigtail to be provided.Tilting mechanism : Heavy duty cast iron gear with cast iron handle fixed on bearing supports.Lid with handle : SS 304, 16 swg lid with self weight handle mechanism. |
| 18 | SS tilting type dal /sambar boiling unit of 120 litres water capacity.Main vessel : ID 610mm x 550mm deep, seamless with dished bottom, SS 304 14 swg with 3 mm thick dish bottom.Robust construction.Frame : SS 304,16 swg sq.tubeSupporting legs : SS 304,16 wg sq.tube 50mmx50mm with flat legs LPG Burner : M50/Model no G-11, working pressure 900-1200 gms/cm2 . Rated heat output 25200 Kcal/hr. The Burner With Stand To Kept On Separate Frame fabricated out of 16 swg SS 304 sheet metal. 3/8\\"x3/8\\"BSP ,5 feet long pigtail to be provided.Tilting mechanism : Heavy duty cast iron gear with cast iron handle fixed on bearing supports.Lid with handle : SS 304, 16 swg lid with self weight handle mechanism. |
| 19 | LPG dosa Hot Plate of size 1220 mm X 650 mm X 850 mm height + 150 mm splash backMS plate : 1220mm x 650mm x 16 mm thick.Side cover : 18 swg, SS304, from all sides LPG V type burners : 3 nos of Length 1100mnm, rated heat output 17650 Kcal/hr. Centre bottom with brass fittings and jet Plate .The burners should be fabricated out of SS Material with mixing tube .Needle control valve : ½”x3/8” BSP needle control valve , brass material for each burner connected with copper pigtail. Manifold : MS, C class seamless pipe 15mm dia with 3.4 mm thickness, ½” x3/8\\" BSP brass adaptors on both sides. 3/8x3/8 BSP 5 feet long pigtail to be provided .Upright legs : 4 nos ,40mmx40mm SS sq tube ,16 swg with nylon bullets and cross bracing. |
| 20 | LPG chappati hot plate with puffer of size 1400 mm X 650 mm X 850 mm HeightFrame : SS 304, 16swg sq tube of 40mmx 40mm.MS Plate : 1400 x 650 x 15 MM Thick With Cast Iron Puffer Jali removable type . Side Cover : 18 Swg, SS304, From All Sides removable type. fitted with SS 8mm nut bolts.LPG Burners : V Type Centre Bottom Ribbon Burners – 3 Nos to be fitted Length Wise . All the burners should be duly supported Up Right Legs : 40mmx40mmx16 Swg Sq Tube With Cross Bracing And Nylon BulletsManifold : MS, C class seamless pipe 15mm dia with 3.4 mm thickness ½” x3/8\\" BSP brass adaptors on both sides and with 3/8x3/8 x 5 feet sukraksha pigtail.Puffer : Cast iron puffer plate 300mmx600mm with seperate V type burner. |
| 21 | SS LPG operated Idli steamer having capacity of 120 Idlies per Batch, Idli size big 3.5” DIA ApproxFrame : SS 304,16 swg, 500mm x500mm x 1200mm ht with steam out let.Water tank : SS 304,16 swg with 1/2\\" drain outlet and water filling sprout.LPG Burner : G10-LPG burner with needle control valve .SS trays : 18 swg, SS 304 material 12 idlies per tray. 10 trays per setSet of extra trays : One extra set to be provided Door : SS 304,16 swg, double jacketed door with neoprene gasket & handle.Needle valve : 1/2\\"x3/8\\" brass control valve with 3/8x3/8 x 5feet long suraksha pigtail. |
| 22 | Dough kneading machine having capacity of 10-11 kg per Batch, Over all dimensions 1000 mm X 1000 mm X 1000 mm height.Mixing VESSEL : Size - ID: 500mm x450mmx 500mm deep .SS 304,16 SWG, TITLING TYPE for unloading of finished dough, with lid and handle.DOL starter : 3 Phase MK 1 type L&T or equivalentMOTOR: 2 HP motor, 1440 rpm 3 ph with DOL startor, cast iron body duly fitted with nuts and bolts on its base. make Crompton Greaves, Navjyot, Hindustan or equivalent SS Main SHAFT : SS 304, 50mm dia with 22 mm lobed web for better mixing. The main shaft to be supported with heavy duty ball bearings at two points . The spiral webs should be neatly finished Bearings to be fitted in bearing housing duly supported to the frame .SS webs : 22-25 mm thick, SS 304 material heavy duty mixing webs fitted to the main shaft. 8 mixing lobes to be provided Frame & Transmission : Heavy duty, Frame should be fabricated out of Mild steel material and should have robust construction. Belt transmission coupled with B section V belts to the motor, with tension adjusting mechanism. cast iron Pulleys duly fitted to the motor and main shaft WARRANTY: One year from the date of actual supply including motor.The machine should be free from any vibrations. |
| 23 | SS vegetable cutting table of size 1850 mm X 1100 mm x 850 mm height Top : 1850mmx 1100mm Top , With 50 mm Beading, duly Finished. Material 16 Swg SS 304 With Under Frame and supports Under Frame For Top : 30mm X 30mm,18 Swg SS 304 Sq Tube With Four Supports Up Right Legs : Six Nos, SS 304 ,16 Swg 40mmx40mm Sq Tube With Cross Bracing. Nylon Bullets Duly FittedFinishing/Buffing : Duly Finished With Mat FinishOpening For Garbage : 250 mm dia round type with sunk in neck duly finished. with trolley and garbage drum . |
| 24 | SS non veg cutting table of size 1200 mm X 700 mm x 850 mm height + 150 mm splash backTop : SS 304,16 SWG, 1300mm x 700mm Top With SS under supports Under Frame For Top : 25mm X25mm ,18 Swg SS 304 Sq Tube With Four Supports Up Right Legs : Four Nos, SS 304, 16 Swg 50mmx50mm Sq Tube With Cross Bracing. Nylon Bullets Duly Fitted. UNDER SHELF /RACK : SS UNDER RACK 650MM WIDE FOR PLASTIC CRATE .Finishing/Buffing : Duly Finished With Mat FinishOpening For Garbage : 250 mm dia round with sunk in neck duly finished. |
| 25 | SS platform trolley of size 1100 mm X 630mm X 900mm height Platform Size : 950mm X600 mm duly Supported To The Main Frame.Material : SS304, 16 Swg Frame : Frame Fabricated Out Of Heavy Duty Frame SS 40 mm X 40 mm Sq Tube 16 Swg Swivel Castor Wheels : 4 Nos,100 mm Dia Swivel Castor Wheels, Bolted To The Main Frame ( Bolt Size 8 mm Dia)Handle : SS304, 14 Swg Dia 40mm SS Pipe Ergonomic Handle, With Supports User Friendly. |
| 26 | SS kitchen table with under shelf of size 1400 mm X 700mm X 850 mm height + 150 mm splash backUnder frame for top : SS 304,16 swg, 30mmx30mm sq tube with three supports Top : SS 304, 16 swg, with Two under supoorts and rounded corners up to 25 mm dia.Mid shelf : SS 304,16 swg with 25mm beeding and two supports upright legs : 30mmx30mm sq tube , SS 304,16 swg sq tube with adjustable type nylon bullets. |
| 27 | SS garbage trolley veg / non veg of dia 500mm round base with 800 mm height handelBase : SS 304 16 swg, round base to support garbage chute.Castor wheels: 4 nos 75mm dia swiel caster wheel fitted with nuts and boltsUp right supports : 25mm dia SS 304, 16 swgGarbage bins Plastic garbage bins-80 lit capacity. |
| 28 | SS single sink unit with garbage crusher of size 700 mm X 650 mm X 800 mm height + 200 mm Splash Back .Top : 700 mm x 650mm Sunkin Top, With 50 mm Beading Duly Finished. Material 16 Swg SS 304 With Under Frame .Under Frame For Top : 25 mm X 25mm, 18 Swg Ss 304 Sq Tube With Four Supports Up Right Legs with side cover : Four Nos , SS 304 ,16 Swg 40mm x 40mm Sq.Tube With Cross Bracing. Nylon Bullets Duly Fitted. SS cover to be fitted from three sides with nut and bolts for repair and maintenance.Finishing/Buffing : Duly Finished With Matt Finish.Sink : with tap ½” BSP long nose water tap of good quality to be provided. 500mm X 400mm X 150mm Deep With Waste Coupling and Long Nose Tap Of Heavy Duty TypeMotor for garbage crusher : 1 HP induction motor with over load protection three phase.Out let Mounting : 11/5\\" BSP waste coupling for sink mounting with out let drain pipes to be provided .Water in let : 1/2\\" BSP water long nose,180 deg turnable faucet to be provided. Necessary plumbing on site to be provided by the supplier .Warranty / Guarantee : One year from the date of supply |
| 29 | SS Pot rack for kitchen of size 1500 mm X 700 mm X 1800 mm height (finish)FRAME : SS 304 ,16 swg, 40mm x40 mm sq tube NO OF SHELF : Four nos with supports including top and bottom. SHELF : Each shelf fabricated out of SS 304, 16 swg, Sq tube 25 mm X 25 mm with supports. No of members – 40 nos including sides for each shelf UP RIGHT LEGS : 4 nos 16 SWG, SS304 with Nylon bullets fabricated out of 40 mm x 40 mm x 16 swg Sq tube. |
| 30 | SS Work table with middle and upright shelf of size 1400 mm X 700 mm X 850 mm height + 650 mm up right shelf Top : SS 304 ,16 swg with 50 mm beeding from all sides and 100 mm splash back Under frame for top : 18 mm X 18 mm sq tube, SS 304, 18 swg with three supports Mid shelf : SS 304. 18 swg with runner supports Up RIGHT SHELFS : 2 shelf - 18 SWG (Equal)Up right legs : 40 mm X 40 mm sq tube, SS 304, 18 swg with nylon bullets. |
| 31 | SS special table for snacks of size 1200 mm X 750 mm X 800 mm heightTop : SS 304 swg Under Frame For Top : 25 mm X 25 mm, 18 Swg SS 304 Sq Tube With Four Supports Up Right Legs : Four Nos , SS 304, 16 Swg 30 mm X 30 mm Sq Tube With Cross Bracing. Nylon Bullets Duly Fitted with cross bracingMid shelf : SS 304 ,18 swg Bottom shelf with supportsFinishing / Buffing : Duly Finished With Mat Finish. |
| 32 | SS table for idli maker of size 1200 mm X 750 mm X 800 mm height + 150 MM SPLASH BACKTop : 16swg 1200MM X 750MM X 25 mm beeding from all sides .Under Frame For Top : 25mm X25mm ,18 Swg Ss 304 Sq Tube With Four Supports Up Right Legs : Four Nos , SS 304 ,16 Swg 30mmx30mm Sq Tube With Cross Bracing. Nylon Bullets Duly Fitted with cross bracingMid shelf : SS 304, 18 swg Bottom shelf with supportsFinishing / Buffing : Duly Finished With Mat Finish. |
| 33 | SS masala trolley of size 800 mm X 450 mm X 900 mm heightTop : SS 304, 16 swg with 50mm beeding from all sides Frame : SS 304, 16 swg, 25mm sq tube with agronomic handle Vessels : 8 nos, 500 gms capacity SS round vessels with lid . Castor wheels : 150 mm dia swivel castor wheel, heavy duty type fitted with nuts and bolts to SS plate. |
| 34 | SS service trolley of size 880 mm X 620 mm X 850 mm height + handleShelf : Three shelf including top and bottom. sunk in shelf 25mm deep . Lower and Mid shelf fabricated out SS 304,18 swg sq tube 25 mm X 25 mm with SS 304, 18 swg sheet metalFrame : SS 304, 16 swg , 25mm sq tube with agronomic handle Castor wheels : 4 nos, 100 mm dia swivel castor wheel, heavy duty type fitted with nuts and bolts to SS plate (SS 304, 16 swg) . capable of carrying loading capacity of 75 kg – 100 kg. |
| 35 | SS Stools for kitchen of size 16” X 16” X 18” heightTop : 16”x16”, SS 304, 16 swg with 1” beeding from all sides Frame : SS 304,16 swg , 25mm sq tube with agronomic handle Up right legs : SS 304,16 swg with anti skid bullets/ rubber pads. |
| 36 | SS stools for vegetable cutting of size 16” Raound 18” heightAdjustable seat : 12” dia round seat, SS material, with adjusting screw, 25mm dia MS material neately finishedFrame : SS 304, 16 swg, 25mm sq tube with agronomic handle Up right legs : SS 304,16 swg with anti skid bullets/ rubber pads. |
| 37 | SS stools for halwai cum sweet maker of size 16 ”Raound X 9” heightAdjustable seat : 10” dia round seat, SS material.Frame : SS 304,16 swg , 15mm sq tube with agronomic handle Up right legs : SS 304,16 swg with anti skid bullets/ rubber pads. |
| 38 | SS kitchen table (Small) of size 1000 mm X 500 mm X 700 mm heightTop : SS 304,16swg Under Frame For Top : 25mm X25mm ,18 Swg SS 304 Sq Tube With Four Supports Up Right Legs : Four Nos , SS 304 ,16 Swg 30mmx30mm Sq Tube With Cross Bracing. Nylon Bullets Duly Fitted with cross bracingMid Shelf : SS 304, 18 swg Bottom shelf with supports6 Finishing/Buffing Duly Finished With Mat Finish. |
| 39 | SS Table with under shelf for Tea Maker of size 1200 mm X 700 mm X 850 mm heightTop : 16 Swg, SS 304 material .Frame : SS 304,16 Swg Sq TubeShelf : One mid shelf with top and bottom, 18 swg, SS 304.Side Cover : 20 Swg, SS 304 From Three Sides Front sliding Doors : Front Sliding Doors 18 Swg, SS 304 with lock and handle.Up Right Legs : SS 304 16 Swg Fitted With Nylon Bullets |
| 40 | Heavy duty induction cook top 5 kw with vessels of size 21” X 20” X 34” heightCapacity : 5 kw Power supply : Single phase , 230 volts Top : High temperature ceramic sheetMax ampere : 21 AMP, max temp 0-300 C , power control knob to be provided .Spares : Single phase 40 amp MCB with 3 core cable to be provided Vessels : i) 16” dia induction friendly ss vessel- 1 nos, ii) 24” induction friendly SS kadai- 1 nos, iii) SS sauce pan 12” – 1 nos Warranty / Guarantee : One year Free on site replacement of all electrical and electronic & mechanical parts including High frequency unit. |
| 41 | Heavy duty induction cook top 10 kw with vesssels of size 29” X 28” X 24” heightCapacity : 10 kw 3 phasePower supply : 440 volt 3 phase supplyTop : High temperature ceramic sheetMax ampere : 16 AMP per phase , max temp 0-300 C electronic display. Power control knob to be provided Spares : Single phase 40 amp 4 pole MCB with 3 core cable to be provided .Vessels : i) 24” dia induction friendly SS vessel- 2 nos, ii) 28” Induction friendly SS kadai- 1 nos.Warranty / Guarantee : One year Free on site replacement of all electrical and electronic & mechanical parts including High frequency unit. |
| 42 | LPG four burner cooking range with oven of size 850 mm X 850 mm X 800 mm height.Top : 16 Swg,SS 304 material .Frame : SS 304,16 Swg Sq TubeLPG BURNERS : 4 no’s high pressure burners with control knob.cast iron body .with cast iron pan supports. SPILL TRAY : 2 NOS, 16 SWG, SS 304 Oven : Jacketed body with thermal insulation, 50 lit capacity, LPG fired burner with thermal controller, Auto cut off, rotary motor with stand, and buzzer, emergency shut off.Oven door : Jacketed Front door with 8 mm thick heat proof glass and handle.Side Cover : SS 304 18 SWG, REMOVABLE TYPE Other asseccerious : Skewers with wooden – 4 no’s, Baking tray – 2 no’s, Heat proof gloves – 2 pairs.Warranty : The unit will be under warranty for one year from the date of supply, the warranty should cover all the LPG and electrical parts. |
| 43 | Bubble type vegetable washer having capacity of 60 to 100 kg per hour SIZE : 1400 mm X 700 mm X 1100 mm heightBlower : 2 HP Blower Motor, 2800 rpm 3 ph with DOL starter duly connected to the blower .Compartments : Four compartment with sheave basket for rice and vegetables separate basket for rice and vegetables, SS 304 material, 16 swg/18 swg.FRAME / Body : SS heavy duty frame with supports. SS 304 blower pipes with jets to be provided for effective washing.Main tank : SS 304, 16 swg for main tank. with rounded corners. duly finished. 500mm deepOut let : 1.5 “out let, GI Plumbing with Ball valve for drainGuarantee / Warranty : One year on site warranty from the date of acceptance including blower motor. |
| 44 | Spares : LPG Burner G11- 3 nos extra. Needle valve- 1/2\\"x3/8\\" BSP brass needle valve- 3 nos extra. Sukrasha pigtail 3/8x3/8x5 feet long- 3 nos extra, to be provided with each unit. |
| 45 | Spares : LPG Burner G11- 2 nos extra, Needle valve- 1/2\\"x3/8\\" BSP brass needle valve- 2 nos, Sukrasha pigtail 3/8x3/8x5 feet long- 2 nos, to be provided with each unit. |
| 46 | Spares : LPG Burner G11- 2 nos extra, Needle valve- 1/2\\"x3/8\\" BSP brass needle valve- 2 nos, Sukrasha pigtail 3/8x3/8x5 feet long- 2 nos, to be provided with each unit. |
| 47 | Spares : LPG Burner G11- 2 nos extra, Needle valve- 1/2\\"x3/8\\" BSP brass needle valve- 2 nos, Sukrasha pigtail 3/8x3/8x5 feet long- 2 nos, to be provided with each unit. |
| 48 | Spares : LPG Burner M50/ G11- 2 nos extra, Needle valve- 1/2\\"x3/8\\" BSP brass needle valve- 2 nos, Sukrasha pigtail 3/8x3/8x5 feet long- 2 nos, to be provided with each unit. |
| 49 | Spares : LPG Burner M50/G11- 2 nos extra, Needle valve- 1/2\\"x3/8\\" BSP brass needle valve- 2 nos, Sukrasha pigtail 3/8x3/8x5 feet long- 2 nos, to be provided with each unit. |
| 50 | Spares : LPG Burner M50/G11- 2 nos extra, Needle valve- 1/2\\"x3/8\\" BSP brass needle valve- 2 nos, Sukrasha pigtail 3/8x3/8x5 feet long- 2 nos, to be provided with each unit. |
| 51 | SS pot rack of size 1300 mm X 600 mm X 1800 mm height ( finish)FRAME : SS 16 swg, 40mm X 40 mm sq tube, SS 304NO OF SHELF : Four nos with supports including top and bottom. SHELF : Each shelf fabricated out of SS 304, 16 swg, Sq tube 25 mm X 25 mm with supports . No of supports : 34 nos for each shelfUP RIGHT LEGS : 4 nos 16 SWG with Nylon bullets fabricated out of 40mm x 40mm x 16 swg Sq tube. |
| 52 | Tilting type wet masala grinder 15 lit capacityFrame : SS heavy duty frame (Overall size 1200 mm X 900 mm)Capacity :15 liters per charge Motor : 2 HP , 3 ph,1440 rpm motor, Cast iron body, copper winding. Duly fitted to the main frame . Kirloskar, Hindustan or Crompton greaves or equivalent , Efficiency-75.5, Power Factor-0.77, IP Rating-IP55, Efficiency Grade-IE2, Enclosure-TEFC. Motors are suitable for voltage 415 V ±10%, frequency 50 Hz ±5%, continuous rating (S1 Duty) with class 'F' insulation suitable for ambient temperature 50 deg C (temperature rise limited to class B).Mixing vessel : stainless steel with covering lid Stone : Hard Coimbatore stone (white stone). The stone should be free from any cracks or deformations. Warranty : full one year warranty including stone and MotorCoconut scrapper : Machine should have cocnut scrapper facility. Top cover : FRP material with locking facility .Note : All The Locking Clamps Should be Of heavy duty Type. The Machine Should Be Smooth In Operation And Free From Any Vibration. |
| 53 | Tilting type wet masala grinder 5 lit capacityFrame : SS Heavy Duty Frame (Overall size - 750 mm X 750 mm)Capacity : 5- 8 Liters Per ChargeMotor with starter : 0.5 Hp , 3 Ph,1440 Rpm Motor, Cast Iron Body, Copper Winding. Kirloskar, Hindustan, Crompton greaves or equivalent 0.5 hp , 3 ph,1440 rpm motor, Cast iron body, copper winding. Duly fitted to the main frame. Kirloskar, Hindustan or Crompton greaves or equivalent , Efficiency-75.5, Power Factor-0.77, IP Rating-IP55, Efficiency Grade-IE2, Enclosure-TEFC. Motors are suitable for voltage 415 V ±10%, frequency 50 Hz ±5%, continuous rating (S1 Duty) with class 'F' insulation suitable for ambient temperature 50 deg. C (temperature rise limited to class B).Mixing Vessel : Stainless SteelStone : Hard Coimbatore Stone (White Stone) The Base And Crushing Stones Should Be Free From Cracks Miss Match Etc.Warranty : Full One Year Warranty Including MotorCoconut Scrapper : 2 Nos (1 No. Extra)Note : All The Locking Clamps Should be of heavy duty type. The Machine Should Be Smooth In Operation And Free From Any Vibration. |
| 54 | SS 7.5 hp wet masala pulveriser having capacity of 30 Kg to 90 kg per hour .Motor : 7.5 Hp 3 ph 2800 rpm , Crompton, CG or Navjoyt make etc ISI Mark. cast iron body.Grinding chamber : SS 304, ID 215 mm ,8mm thick & 8-10 cm width with SS teeth set.Beater : SS 304 18 mm thick , four lobed , SS Dia cast beater With gun metal bush bearing and its housing . Housing should be 6 to 8 mm thick. Note: The beater shaft OD 25mm dia, should be coupled to the motor shaft with SS Sleeve separately.Beater shaft : SS 304, 25 mm dia with SS key and SS lock nuts. |
| 55 | SS pulve riser.Capacity : 10 to 15 kg per hour Motor : 2 HP 3 ph 1440 rpm Kirloskar, CG or Navjyot make etc ISI Mark. cast iron body.Grinding chamber : SS 304, ID 200 mm chamber with 80 mm wideBeater : SS 304 ,10 mm thick , four lobed , SS Die cast beater With gun metal bush bearing and its housing . Note: The beater shaft OD 150 mm dia, should be coupled to the motor shaft with SS Sleeve Separately.Feeding hopper : SS 16 swg , SS 304 , with SS 304 feeding bend opening in the chamber. ½” water in let valve with brass hose nipple. Door : Fabricated from SS 304, 6 mm thick Plate, Hinge: fabricated of SS 304, Heavy duty SS handle. SS locking arrangement fabricated out of 5mm SS 304 Rod. Locking should be heavy duty type. Safety limit switch to be provided for safe operation.Frame : Heavy duty MS frame fabricated out of 5mm thick angle 1.5’’x1.5’’and with SS Cover on four sides SS 304.Upright legs : SS 304.16 swg .The legs should be minimum 24’’ apart and should give a sturdy supportDOL starter : Siemens or L&T make. With relay range 4 to 9 amp approx .or equvalant.MK1 type. |
| 56 | Vegetable Cutting machineCAPACITY : 60 to 100 kg per hour MOTOR : 1 HP motor, 1440 Rpm 3 ph with starter, Hindustan equivalent. Belt driven to main shaft. Speed options - 2 speed option for better utilityATTACHMENTS / BLADES : 5 to 6 Nos. of different blades / attachments, user friendly. Will be used to cutting, dicing, making chips etc.FRAME / Body : SS heavy duty frame with supports, SS body with hopper for feeding and discharge port for easy collectionWARRANTTY : One year from the date of actual supply |
| 57 | SS potato peeler CAPACITY : 10 Kg per charge SIZE : 500 mm X 500 mm X 750 mm heightMOTOR :1 HP motor, 1440 rpm 3 ph with DOL starter Main vessel : SS body with inlet/ outlet pipe.FRAME / Body : SS heavy duty frame with supports, SS body with hopper for feeding. Water inlet and waste out let WARRANTTY : One year from the date of actual supply. |
| 58 | SS work table for grinding sectionSize : 1000mm x 500mm x 750mm htUnder frame for top : SS 304,16 swg 25mmx 25 mm sq tube with two supports Top : SS 304 1000mm x 500mm , SS 30mm sq tube for under frame and two supports Mid shelf : SS 304, 18 swg with 25 mm beeding and two supports Upright legs : 30 mm X 30 mm SS-304, 16 swg sq tube with nylon bullets. |
| 59 | Commerical type coconut scraper of size 550 mm X 450 mm X 600 mm height approx + collection vesselMotor : 1 HP, 3 phase, 950 rpm three phase motor fitted with cast iron pulley 75 mm dia ( OD) . motor body cast iron. heavy duty, 2 sq mm four core cable 2 Mts long duly connected to the motor to be provided .Frame : Frame fabricated out of SS 304, 25 mm X 25 mm sq tube with rubber bush for leg support.Main shaft : SS-304, 25 mm shaft with 250 mm diameter B section pulley . The main shaft should be supported with heavy duty ball bearings 2 nos in its housing.Coconut Scrapper : SS five- six lobed scrapper filleted to the main shaft , removable type 10 nos extra to be provided .Working RPM : 200-250 RPM Collection tray / vessel : SS 304, removable type collection tray round type, 400 mm diameter.Side Cover : SS 304, 18 SWG duly fitted to the main frame with SS screwsPulley : Cast iron B section V Belt pulleys for, Drive shaft- 75 mm, Driven shaft – 250mmGuarantee / Warranty : One year from the date of supply including motor. |
| 60 | SS food service counterSize : 2200 mm X 660 mm + 350 mm railing X 850 mm height + 600 mm sneeze guardTop : SS 304, 16 swg with 50 mm beeding from all sides Water tank : SS 304, 16 swg with heaters ,1/2\\" BSP inlet and 1.5\\" BSP waste coupling outlet with brass valve. water tank should have a heater pocket 650 mm x 450 mm x 200 mm deep. the heater pocket should be covered with 18 swg perforated sheet SS sneeze guard : 600mm height, SS frame fitted with 8 mm acrylic sheet with warm light system. the sneeze guard should be of removable type. The unit should be bolted to the main frame .Up right legs : 6 nos. 40mmx 40mm x 16 swg sq tube with cross bracing and adjustable nylon bullets .Front cover : Matt finish, 18 swg , SS 304 .SS railing : 350 mm wide SS railing fabricated out of 5 nos of 25mmx25mm sq tube SS 304, 16 swg ,with four supports . spill tray to be provided G N Pans with lid SS 304 ( Zanuff make or equivalent) : SS 1/1 GN Pans 530 mm X 325 mm X 200 mm deep (25 lit capacity) = 5+2= 7 nos , SS 1/2 GN Pans 325mm x265mmx 200mm deep (11 lit capacity)- 2+2= 4 nos, SS Round pans- ID 225mmx200mm deep - 2 nos Heaters : 3 kw industrial heaters 2 nos, duly fitted to the main tank with SS 1/1/4\\" BSP sleeve. Heaters escorts make or eq. |
| 61 | SS table of clean dish/platesSize : 630 mm X 660 mm X 850 mm height + 350 mm SS RAILINGTop : SS 304 ,16 swg with 2” beeding from all sides Mid shelf : SS 304 . 18 swg with runner supports SIDE COVER : SS-304, 18 SWG, THREE SIDES .Up right legs : Six nos 30mm x 30mm x 16 swg sq tube |
| 62 | Cold bain marie counterSize in mm/ capacity 1 Size 1200mm x 700mm x 850mm ht + 600mm sneeze guardTop : 16 swg 304Up right legs : 40mmx 40mm x 16 swg sq tube Side cover : Three side cover ,SS 304, 20 swg Matt finish , SS railing : 350 mm wide ss railing fabricated out of 25mm x 25mm sq tube with spill tray and two supports G N Pans- 04 nos : 1/1 GN pans 4 nos & 2 nos extra of same size.Condensing unit : ½ Hp with digital temp controller, Working temp +5 C to +10 CWarranty : Full on site warranty including compressor and other moving parts . |
| 63 | SS counter table with mid shelf Size : 1000 mm X 500 mm X 800 mm heightTop : SS-304, 16 swg with 2” beeding from all sides Mid shelf : SS 304 . 18 swg with runner supports Up right legs : Six nos 30mm x 30mm x 16 swg sq tube |
| 64 | SS table with upright shelf for service counterSize: 1400mm x 700 mm x 800mm ht + 600 mm up right shelf Top : SS 304 ,16 swg with 50mm beeding from all sides Mid shelf : SS 304, 18 swg with runner supports Up RIGHT SHELFS : 300MM wide , 18 SWG, SS-304 Up right legs : 40 mm X 40 mm sq tube, SS 304, 18 swg with nylon bullets. |
| 65 | SS table for tea coffee dispenserSize 1100 mm x 660mm x 850 mm heightTop : SS 304,16 swg with 50 mm beeding from all sides Under frame for top : SS 304,18 swg, 25mm x 25mm sq tube with 2 supports Side cover : Three sides, SS-304, 20 swg Spill tray : 120 mm wide spill tray with drail out facilitySS railing : 350 mm wide ss railing fabricated out of 25 mm SS tube Mid shelf : SS 304 . 18 swg with runner supports Up right legs : 4 nos. 30mm x 30mm x 16 swg sq tube . |
| 66 | SS cashier tableSize : 1100 mm X 660 mm X 850 mm heightTop : SS 304 ,16 swg with 50 mm beeding from all sides Under frame for top : SS 304 ,18 swg , 25mm x 25mm sq tube with two supports Side cover : Three sides , SS-304 18 swg Drawer : SS 304,18 swg drawer with sliding arrangement with lock and key. shelf under drawer with door, handle and key to be provided. |
| 67 | Cold Display Counter Size : 1000 mm x 650mm x 1200 mm heightCondensing Unit : ½ With Digital Display Type Controller. Working Temperature 5+ C To +10 C. Unit should be sturdy & Give Noise Free Operation. On Site Warranty For All Working Parts Except Glass.Frame Work : SS 304, 16 SwgGlass Panels : 8 mm Thick Clear Glass Panels Free From All Flaws From All Sides With Front And Glass Door With Lock And Key ArrangementShelf : Three Shelf Type Sturdy Fabricated out of SS-304 Material Warranty : One Year Full On Site Warranty. |
| 68 | SS hot food cabinetSize : 600 mm X 450 mm X 550 mm heightFrame : 18 Swg, SS 304 Heaters : 1 Kw, Tubular Air Heaters with Temp Controller 0 -100 C Glass Panels : 6 mm Glass Panels From All Sides With Front and Glass Door Shelf : Three Shelf Warranty : One Year Full On Site Warranty. |
| 69 | Sandwich griller of rating 4 kw single phase SIZE : 400 mm x 400mmGRILLER PLATES : Casting with non stick coatingFrame : SS 304 with handleHeaters : Tubular heaters with thermostatic controller and indicator and wire of 1 kw each. |
| 70 | Industrial JuicerMotor : 1 HP ,single phase, 1440 rpm cast iron bodyFrame : SS main frame with motor cover Vessels / Juice Jar : 3 Nos. to be provided with lid, SS body with lid Switch : Heavy duty ‘on-off’ switchSpeed : Single speed |
| 71 | Table top oil fryerOil holding capacity : 2 to 2.5 liters per chamberRating : 4 kw tubular oil heaters duly fitted inside the oil chamber Temperature control : 0-300 C thermostatic controller, rotary switch and indicators , separate for each compartment Frame / Body : SS 304, with sieves and oil drain valve to be provided Warranty : One year from the date of supply. |
| 72 | SalamanderSize : 660 mm X 450 mm X 450 mm heightRating : 2 kw, tubular air heaters .Frame : SS main frame, SS-304, 16 swgSS grill : SS grill fabricated out of 5 mm rod with handle Control : 32 Amp rotary switch, thermostatic control 0-150 C, metallic indicators & 2 mts cable with light system. |
| 73 | Table Top SS spoon sterilizer with under tableRating : 2 kw , single phase Frame : SS main frame, SS 304,16 swg with perforated topSize : 300 mm x 400 mm x 300 mm heightSpoon basket : 4 nos - SS 304, 16 swg perforated spoon basket 70 mm dia x 80 mm deep. removable type .Water tank : 16 swg, SS 304 with 1/2\\" BSP out let with brass valve and with water level float switch.Heater : 2 kw industrial heater- 1 nos fitted to the main tank with 1/1/4” couplingControl box : Control box should have rotary switch of 16 amp, 32 amp contactor, temperature controller 0- 100 and indicators. |
| 74 | SS table with slyding doors and under shelf Size : 1400 mm X 600 mm X 800 mm heightTop : 16 Swg, SS 304 with under supports .Frame : SS 304, 16 Swg Sq TubeShelf : Two Shelf At Equal DistanceSide Cover : 15 Swg, SS 304 From Three Sides Front Door With Arylic Window : Front Sliding Doors 18 Swg, SS 304Up Right Legs : SS 304, 16 Swg Fitted With Nylon Bullets. |
| 75 | Commerical type Induction cook topRating : 3 kw , single phase,230 voltFrame : SS main frame, SS 304, 18 swgWarranty : One year full on site warranty from the date of supplyControl : Digital electronic with functions as per manufactures. Should be provided with cable and plug. Should have functions for frying, cooking boiling, and warming etc. |
| 76 | Flykill lightRating : 60/40 watts, single phase No of tubes : Ultra violet, 2 nos 230 volt, 2 feet longTransformer : Electronic transformerBody : Hard PVC with smooth finishType : Hanging type / wall mounted . |
| 77 | Elecrical table top dosa plate Size : 700 mm X 450 mm X 250 mm heightHeater : 6 KW tubular heater well insulated from all sides.TOP PLATE : MS Plate, 8 mm thick with splash back from three sides and oil drain Side cover : SS 304, 18 swgControl : 32 amp rotary switch, temperature controller, metallic Indicators, all the wiring should be of Teflon coated. Warranty : One year from the date of supply. |
| 78 | Vertical vise cooler 800 lit capacityCapacity : 800 liter storage capacityFrame /Body : Pre painted steel body with castor wheel for shifting with PUF Insulation.Compressor : Temshah, Emerson, blue star, Embarco or equivalent Front Door : Glass doors with lock and keyTemp Zones : 2 Zones Spill tray / Shelf : Bottom spill tray / four shelf adjustable type Warranty : On site one year from the date of supply including compressor. |
| 79 | SS three sink unit with water heater and platform on RHS of size 2000 mm X 700 mm X 850 mm height + 180 mm splash backTOP : In sink type, SS 304, 16 swg with two heavy supports and 50 mm beading SS Sink : 450mm x 400mm x 450 mm deep sink with waste coupling.Extra heaters / Spares : Heaters- 2, Thermostat- 2 nos ( 0-100 C), Metallic indicators - 2 nos, extra to be provided. |
| 80 | SS Table with middle sink |
| 81 | Hood type dish washer with SS entry / exit (Loding / Unloding) tables.Rating : 6 kw ,3 phase 80 trays per hour Frame : SS double skinned bodySize : 660 mm x 660 mm x 1200 mm heightControl : Digital electronic with functions as per manufactures Water tank : 70 lit capacity water tank with 3 kw heater, water consumption 2 liters per basket approximatelyHeater : 2 kw industrial heater fitted to the main tank with 1/1/4” couplingDosing pumps : Peristaltic dosing Wash pump and rinse ad pump 8 to 12 watts each with all attachments .Rinse liquid : 20 sets of rinse liquid set to be provided SS loading table : 1000mm x 650mm x 850 mm ht with SS sink for pre washingSS Unloading table : 1000mm x 650mm x850mm ht with under shelf Baskets : PVC 500mmx 500mm x 100 mm ht, 8x8 peg baskets 6 Nos to be provided, spoon basket – 1 nos , Glass /tumbler basket 3 nos to be provided along with the machine Dish wash , dish quich liquid : 20 sets of washing soap solution to be provided along with the machine Warranty / Guarantee / Training : The supplier should give one week training and should have a service center in and around Mumbai. He should have well equipped staff/ technician. |
| 82 | SS table for clean dish landing of size 1200 mm X 700 mm X 850 mm height + 180 mm splash backTOP : In sink type top, SS304, 16 swg with 50mm beading, all the corners should be duly finished. Under Frame for top :25 mm x 25mm x 16 swg sq tube with three supports for topMid shelf : SS 304, 18 swg fabricated out of 18 swg, SS 304 sheet material with two runner supports . Up right legs : 4 nos. 40mm x40mm x 16 swg SS 304, sq tube with cross bracing and adjustable type nylon bullets. |
| 83 | SS soiled dish landing table with garbage chute of size 1200 mm X 700mm X 850 mm heightTop : 50mm deep sunken top with 80mm platform from all sides. 250mm dia round raised garbage chute . SS304, 16 swgUnder Frame for top : 25mm x 25mm x 16 swg SS304, sq tube with two supports for topUp Right Legs : SS304, 16 swg,40mm X 40mm Sq Tube With Nylon Bullets With Three Sides Cross Bracing |
| 84 | SS clean dish rack of size 900 mm X 700 mm X 1800 mm height (finish)FRAME : SS304, 16 swg,25mm x25 mm sq tube NO OF SHELF : 4 nos. with supports including top and bottom. SHELF : Each shelf fabricated out of SS 304, 18 swg, Sq tube 25 mm X 25 mm with supports . No of members – 26 nos. including sides for each shelf UP RIGHT LEGS : 4 nos. 16 swg with Nylon bullets fabricated out of 30mm x 30mm x 16 swg Sq tube. |
| 85 | Water Cooler having tank capacity of 120 litresCooling capacity : 80 lit per hourFaucets/taps : 2 nos push type , brass chrome finished, 1/2\\" BSP.Compressor : Techmesh, bluestar etcFrame : SS304, 20 swg Drip tray : SS 304 ,20 swg Refrigerant : R134Top door : SS 304,18 swg with locking facility. |
| 86 | SS Table for clean tumbler for water cooler of size 1000 mm X 1000 mm X 800 mm heightTOP : 1000 mm X 1000 mm X 50 mm. SS 304, 16 swg.Under Frame For Top : SS 304, 16 SWG 40 mm X 40 mm Sq tubeSS trays : 2 nos, 500 mm x 500 mm x 100 mm height, SS304, 18 swg with water drain.Mid shelf : SS 304, 16 SWG, with runner supports.Upright legs : 25 mm x 25 mm sq tube, SS304, 16 swg with adjustable nylon bullets. |
| 87 | Wooden carved four fold partition |
| 88 | SS table with sink on LHS of size 2100 mm X 620 mm X 800 mm height.Top: SS 304,16 SWG. In sink type top, 2100mm x 620mm + 180 mm Splash back from three sides.Sink size : 400 mm X 350 mm X 150 mm deep with waste coupling.Side Cover : 18 SWG, SS 304 .Under Shelf : One Mid Shelf, SS 304, 18 SWGDoor : Three Sliding Door With Lock And KeyTap : Long neck half turn faucet with stopcock and connection pipe. |
| 89 | SS table with sink on RHS of size 2100 mm X 620 mm X 800 mm heightTop: SS 304,16 SWG. In sink type top, 2100mm x 620mm + 180 mm Splash back from three sides.Sink size : 400 mm X 350 mm X 150 mm deep with waste coupling.Side Cover : 20 SWG, SS 304 .Under Shelf : One Mid Shelf, SS 304,18 SWGDoor : Three Sliding Door With Lock And KeyTap : Long neck half turn faucet with stopcock and connection pipe. |
| 90 | SS work table of size 1200 mm X 500 mm X 800 mm height + 180 mm splash backTop : 1200mmx 500mm ,SS 304,16 SWGSide Cover : 20SWG, SS 304Under Shelf : One Mid Shelf , Ss 304,18 SWGDoor: Sliding Door With Lock And Key. |
| 91 | SS table service table of size 2100 mm X 600 mm X 800 mm heightTop : 2100mmx 600mm SS 304,16 SWGSide Cover : 20 SWG, SS 304 from three sides Under Shelf : One Mid Shelf, SS 304, 18 SWGDoor : Sliding Door With Lock And Key. |
| 92 | SS adjoining table of size 1200 mm X 500 mm X 800 mm height + 100 mm splash backTop : 1200 mm X 500 mm, SS 304, 16swgSide Cover : 20 SWG, SS 304Under Shelf : One Mid Shelf, SS 304, 18 SWGDoor : Sliding Door With Lock And Key. |
| 93 | SS wall mounted cabinet / rack for store roomSize : 1100 mm X 400 mm x 550 mm height Material : SS 304,16 swgShelf : One Mid Shelf Doors : Four Doors with see through Arylic glass window. handles lock and key.Support Bracket : SS304, 16 SWG. |
| 94 | SS Storage Rack small for store roomSize : 600 mm X 600 mm X 1600 mm heightMaterial : SS 304,16 swgShelf : Three shelf SS 304, 18 swgDoors : Single front Arylic door (8 mm thick) with handles and lock.Support Bracket : SS304, 16 SWG.Support legs : 30 mm X 30 mm X 16 swgsq tube with nylon bullets / levellers. SS304, 16 swg |
| 95 | EXHAUST AIR BLOWERS:Supply, Installation, Testing and Commissioning of SISW centrifugal kitchen exhaust blower of capacity 10000 CFM at 40 mm static along with SS bird screen, flexible metallic canvas connections, drive arrangement including required foundations and all accessories, high efficiency TEFC Motor & Starter, control wiring, power cable terminations etc. as per drawings, technical specifications & instructions of Engineer-in-charge. |
| 96 | DOUBLE SKIN TYPE SUPPLY AIR BLOWERS : Supply, Installation, Testing and Commissioning of SISW centrifugal kitchen Supply blower of capacity 10000 CFM at 40 mm static along with SS bird screen, flexible metallic canvas connections, drive arrangement including required foundations and all accessories, high efficiency TEFC Motor & Starter, control wiring, power cable terminations etc. as per approved drawings, technical specifications & instructions of Engineer-in-charge. The blower assembly shall be double skin cabinet type housing filter bank along with 4 Ply HDPE Pre-filters of required size( for example 610 mm x 610 mm x 305 mm). |
| 97 | KITCHEN HOOD;SITC of SS Kitchen hood made out of 18 SWG sheet along with grease filtersand oil drain facility with adequate supports from the slab and/or from the floor, having air flow capacity of 10000 cfm, complete in all respects as per technical specifications, drawings and as instructed by Engineer-In-Charge. NB: 1) The drawing shall be made by contractor as per final kitchen equipment layout and got approved from EIC before commencement of work as per kitchen layout. 2) The cost of grease filters along with drain arrangement shall be included under this item and no extra payment shall be made. |
| 98 | GI Ducting 24 SWG : Design, supply, fabrication, installation, testing and commissioning of GI ducting for supply from kitchen ventilation ducts complete with turning vanes, access doors, supports etc. as per drawing and specifications |
| 99 | GI Ducting 22 SWG : Design, supply, fabrication, installation, testing and commissioning of GI ducting for supply from kitchen ventilation ducts complete with turning vanes, access doors, supports etc. as per drawing and specifications |
| 100 | GI Ducting 20 SWG : Design, supply, fabrication, installation, testing and commissioning of GI ducting for supply from kitchen ventilation ducts complete with turning vanes, access doors, supports etc. as per drawing and specifications |
| 101 | Grilles and Dampers:Supply, installation, testing & commissioning of disc valve (polypropelene / steel) of size 250 mm dia with sleeve of required size duct connection all as per standard specification and instruction of EIC |
| 102 | PCC Support : 1:2:4 PCC Supposrts/ Foundation as per instructions if EIC. |
| 103 | MS Structural Steel:SITC of MS structural steel includeing plates, flanges, angles, I beams etc.as per instructions of EIC |
| 104 | Starter Panel for Blowers : Supply, installation,testing & commissioning of 14 guage sheet starter enclosure,starter panel, powder coated wall mounting,front operated for acess cubicle type, totally enclosed, with IP-55 protection with hinged and backable doors complete with starters of suitable rating . It shall be fabricated from 2mm thick CRCA sheets including interconnections, tinned copper crimping lugs, bonding to earth, suitable for use at 415 V, 3 phase 50 HZ system and suitable for a fault level of 35 KA symmetrical at 415 V complete as per specification, instruction, drawings & approval of E-I-C as below : |
| 105 | Remote ON / OFF P.B. Station: Supply, installation, testing and commissioning of 14 SWG MS CRCA sheet, remote ON/OFF push button enclosure, with ON / OFF indication lamps, IP 42, wall mounting type, powder coated with RAL 7032 shade complete with internal wiring with 1.5 sq.mm copper PVC FRLS wires etc. |
| 106 | Copper Cables : Supply, installation, testing & commissioning of 1.1 KV grade Cu. armoured cable for Outdoor units on Wall/Cable tray XLPE insulated, inner sheath PVC tapped, extruded outer sheath PVC with FRLS and rodent termite repellent properties, GI strip / wire armoured, copper conductor power cable confirming to IS : 1554 part I/IS 7098 part-1 with upto date amendments, fixed on cable tray (measured as separate item) all fixing accessories, etc. complete including painting of M.S spacers/angles and saddles all as per enclosed detailed specifications, drawings & as per instructions of the E-I-C. The space between the two supports shall be 600 mm. approximately. The rodent and termite repellent property of MV cable shall be proved by either testing at factory or by submitting appropriate test certificates as per instructions of EIC. 3C x 25 sq. mm. Cu |
| 107 | Copper Cables : Supply, installation, testing & commissioning of 1.1 KV grade Cu. armoured cable for Outdoor units on Wall/Cable tray XLPE insulated, inner sheath PVC tapped, extruded outer sheath PVC with FRLS and rodent termite repellent properties, GI strip / wire armoured, copper conductor power cable confirming to IS : 1554 part I/IS 7098 part-1 with upto date amendments, fixed on cable tray (measured as separate item) all fixing accessories, etc. complete including painting of M.S spacers/angles and saddles all as per enclosed detailed specifications, drawings & as per instructions of the E-I-C. The space between the two supports shall be 600 mm. approximately. The rodent and termite repellent property of MV cable shall be proved by either testing at factory or by submitting appropriate test certificates as per instructions of EIC. 3C x 4 sq. mm Cu |
| 108 | END JOINTS FOR COPPER CABLE:End jointing of Cu. Stranded cable by crimping with supply of all jointing materials like solderless tinned copper cable socket, cable glands, gland earthing, insulation tape, flux, duplicate interconnection between gland earthing strip & to the nearest earthing bus terminals as per the drawings, specifications and as per the instructions of the Engineer-in-charge. 3C x 25 sq. mm. Cu |
| 109 | END JOINTS FOR COPPER CABLE: End jointing of Cu. Stranded cable by crimping with supply of all jointing materials like solderless tinned copper cable socket, cable glands, gland earthing, insulation tape, flux, duplicate interconnection between gland earthing strip & to the nearest earthing bus terminals as per the drawings, specifications and as per the instructions of the Engineer-in-charge. 3C x 4 sq. mm Cu |
| 110 | CABLE TRAY : Supply & fixing of ladder type GI cable trays of size 150 mm (W) x 50 mm (D) x 2 mm (T) with vertical sides on both ends and suitable MS supports including concrete bolts, hold fast etc. The scope includes supply of readymade bends, reducers,Tee, covers etc. as required as per instructions of EIC. |
| 111 | EARTHING SYSTEM :Supply, installation & testing of earthing system & associated accessories, etc. of Tinned Copper strip/wire fixed on cable tray with saddles, interconnections of earth strip/wire with brass nuts, bolts & washers and solder jointing, painting with two coats of green enamel paint for earth wire/strip on surface, etc. complete all as per layout drawing, specifications & as per the instructions of E.I.C. 25 x 3 mm Copper strip./Wire |
| 112 | S.S 304 L, Pipeline :Supply, fabrication, installation , testing, and commissioning of Seamless S.S 304L Pipe of 25 mm NB,Schedule 40 along with fittings and accessories such elbows, tee, Reducers , gaskets, S.S harware, anchor fasterens including cutting, grinding, welding and as per tender specifications. |
| 113 | Flanges :Supply , fabrication and installation of SS 304 L, flanges (Slip-on , Raised Faces) suitable for 25 mm NB,Schedule 40 , pipe including cutting, grinding, with gaskets, S.S hardware along with fittings,accessories and as per tender specifications. |
| 114 | SS welding joints as per tender specification |
| 115 | D P testing of weld joints as per specification |
| 116 | Fire safe ball valves:Supply, installation, testing & commissioning of 25 mm NB, Fire safe ball valves along with necessary fittings , accessories, S.S hardware and as per tender specifications. |
| 117 | Pressure Regulating Valve :Supply, installation, testing & commissioning of the pressure regulating valves in LPG pipeline of 25 mm NB along with necessary fittings, accessories and as per tender specification. |
| 118 | Pressure Gauges:Supply and installation of 150 mm dia pressure gauges in LPG gas pipeline with necessary fittings and as per tender specifications. |
| 119 | LPG Gas Leak Detection System :Supply, installation, testing & commissioning fo LPG gas detection and alarm system and along with necessary fittings, control wiring, necessary accessories and as per tender specification. |
| 120 | Flame Arrestor:Supply, installation, testing & commissioning of Flame arrestor suitable for 25MM NB , SCH 40 SS304 L pipeline along with necessary accessories as per tender specification. |
| 121 | Solenoid Valve:Supply, installation, testing & commissioning of Flame arrestor suitable for 25MM NB , SCH 40 SS304 L pipeline along with necessary accessories as per tender specification. |
| 122 | Safety Relieve valve:Supply, installation, testing & commissioning of Flame arrestor suitable for 25MM NB , SCH 40 SS304 L pipeline along with necessary accessories as per tender specification. |
| 123 | S.S Supports:Fabrication ,supply and installation out of S.S 304 supports and structures made out of channels, angles , beams etc, including cutting,welding grinding etc. as per site reuqirement and as per tender specifications. |
| 124 | M.S Supports:Fabrication ,supply and installation of M.S supports and structures made out of channels, angles , beams etc, including cutting,welding grinding etc. as per site reuqirement and as per tender specifications. |
| 125 | LPG Gas manifold/distribution Line :Fabrication ,supply and installation, testing & commissioning of 25 mm dia SS 304 L manifold of 16 hose connection with suitable socket connection in manifold etc. Filter (Suitable to 25 mm NB Gas Pipeline). |
| 126 | Filter (Suitable to 25 mm NB Gas Pipeline). |
| 127 | Fire Safe Ball Valve -(Size-1/2'' dia). |
| 128 | Surksha pipe (15 mm Dia)(Size-1/2'' dia). |
| 129 | Gas Manifold NRV (Size-1/2'' dia). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
TodayAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 26 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 29 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender