Tender For Comprehensive Maintenance Of Certain E/M Works At Domestic Area At Bhisiana Under Ge (Af) Bhisiana
Tender Value
25 Lakhs
Estimated cost
Bid Submission
04 Aug 2026
20 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Comprehensive Maintenance Of Certain E/M Works At Domestic Area At Bhisiana Under Ge (Af) Bhisiana
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and drawing in replacement 1.5 sqmm nominal cross-sectional area, single-core, multi-strand copper conductor, FRLSH PVC insulated, unsheathed cable (any colour as directed or as per existing), 1100 V grade, conforming to IS 694:2010, through the existing conduit system/casing caping, including careful withdrawal of the existing cable and drawing in the new cable without damaging the existing serviceable wiring and conduit/ casing caping. The work shall include wiring from the distribution board (DB) to switchboards and from switchboards to light points, fan points, exhaust fan points, socket outlets, sub main wiring or other connected points, as per the existing wiring layout, including all necessary terminations, testing and commissioning. The item includes all labour, tools and plant, consumables and incidental works required for satisfactory completion, complete in all respects as specified and directed by the Engineer-in-Charge.Note: The cable shall be measured on the basis of the actual running length drawn and fixed at site, and payment shall be made in Running Metres (RM) only. |
| 2 | Supplying and drawing in replacement 2.5 sqmm nominal cross-sectional area, single-core, multi-strand copper conductor, FRLSH PVC insulated, unsheathed cable (any colour as directed or as per existing), 1100 V grade, conforming to IS 694:2010, through the existing conduit system/ casing caping, including careful withdrawal of the existing cable and drawing in the new cable without damaging the existing serviceable wiring and conduit/ casing caping. The work shall include wiring from the distribution board (DB) to switchboards and from switchboards to power point socket outlets, sub main wiring or other connected points, as per the existing wiring layout, including all necessary terminations, testing and commissioning. The item includes all labour, tools and plant, consumables and incidental works required for satisfactory completion, complete in all respects as specified and directed by the Engineer-in-Charge.Note: The cable shall be measured on the basis of the actual running length drawn and fixed at site, and payment shall be made in Running Metres (RM) only. |
| 3 | Supplying and drawing in replacement 4 sqmm nominal cross-sectional area, single-core, multi-strand copper conductor, FRLSH PVC insulated, unsheathed cable (any colour as directed or as per existing), 1100 V grade, conforming to IS 694:2010, through the existing conduit system/ casing caping, including careful withdrawal of the existing cable and drawing in the new cable without damaging the existing serviceable wiring and conduit/ casing caping. The work shall include wiring from the distribution board (DB) to switchboards and from switchboards to geyser point, AC point, power point socket outlets, sub main wiring or other connected points, as per the existing wiring layout, including all necessary terminations, testing and commissioning. The item includes all labour, tools and plant, consumables and incidental works required for satisfactory completion, complete in all respects as specified and directed by the Engineer-in-Charge.Note: The cable shall be measured on the basis of the actual running length drawn and fixed at site, and payment shall be made in Running Metres (RM) only. |
| 4 | Supplying and drawing in replacement 6 sqmm nominal cross-sectional area, single-core, multi-strand copper conductor, FRLSH PVC insulated, unsheathed cable (any colour as directed or as per existing), 1100 V grade, conforming to IS 694:2010, through the existing conduit system/ casing caping, including careful withdrawal of the existing cable and drawing in the new cable without damaging the existing serviceable wiring and conduit/ casing caping. The work shall include wiring from the distribution board (DB) to switchboards and from switchboards to geyser point, AC point, power point socket outlets, sub main wiring or other connected points, as per the existing wiring layout, including all necessary terminations, testing and commissioning. The item includes all labour, tools and plant, consumables and incidental works required for satisfactory completion, complete in all respects as specified and directed by the Engineer-in-Charge.Note: The cable shall be measured on the basis of the actual running length drawn and fixed at site, and payment shall be made in Running Metres (RM) only. |
| 5 | Supply and fixing in replacement of pressed steel powder-coated sunken terminal box of size 100 mm × 100 mm, minimum 50 mm deep, suitable for mounting non-modular switches, socket outlets, fan regulators and other wiring accessories, complete with 3 mm thick plastic laminated sheet cover duly cut to accommodate the respective accessories. The item shall include dismantling of the existing terminal box, fixing the new box in position, making good the disturbed wall surface with cement mortar (1:3) to match the existing finish, and providing all necessary fixing materials, steel screws, rawl plugs and other accessories required for proper installation, complete in all respects as specified and directed by the Engineer-in-Charge.Note: The rate shall be deemed to include refixing of existing serviceable switches, socket outlets, fan regulators and other accessories. However, if any switch, socket outlet, fan regulator or other accessory is found unserviceable and requires replacement with a new one, the same shall be measured and paid for separately under the respective BOQ item. |
| 6 | Supply and fixing in replacement of pressed steel powder-coated sunken terminal box of size 175 mm × 100 mm, minimum 50 mm deep, suitable for mounting non-modular switches, socket outlets, fan regulators and other wiring accessories, complete with 3 mm thick plastic laminated sheet cover duly cut to accommodate the respective accessories. The item shall include dismantling of the existing terminal box, fixing the new box in position, making good the disturbed wall surface with cement mortar (1:3) to match the existing finish, and providing all necessary fixing materials, steel screws, rawl plugs and other accessories required for proper installation, complete in all respects as specified and directed by the Engineer-in-Charge.Note: The rate shall be deemed to include refixing of existing serviceable switches, socket outlets, fan regulators and other accessories. However, if any switch, socket outlet, fan regulator or other accessory is found unserviceable and requires replacement with a new one, the same shall be measured and paid for separately under the respective BOQ item. |
| 7 | Supply and fixing in replacement of pressed steel powder-coated sunken terminal box of size 350 mm × 300 mm, minimum 50 mm deep, suitable for mounting non-modular switches, socket outlets, fan regulators and other wiring accessories, complete with 3 mm thick plastic laminated sheet cover duly cut to accommodate the respective accessories. The item shall include dismantling of the existing terminal box, fixing the new box in position, making good the disturbed wall surface with cement mortar (1:3) to match the existing finish, and providing all necessary fixing materials, steel screws, rawl plugs and other accessories required for proper installation, complete in all respects as specified and directed by the Engineer-in-Charge.Note: The rate shall be deemed to include refixing of existing serviceable switches, socket outlets, fan regulators and other accessories. However, if any switch, socket outlet, fan regulator or other accessory is found unserviceable and requires replacement with a new one, the same shall be measured and paid for separately under the respective BOQ item. Please Enable Macros to View BoQ information |
| 8 | Supply and fixing in replacement of pressed steel powder-coated sunken terminal box of size 350 mm × 300 mm, minimum 50 mm deep, suitable for mounting non-modular switches, socket outlets, fan regulators and other wiring accessories, complete with 3 mm thick plastic laminated sheet cover duly cut to accommodate the respective accessories. The item shall include dismantling of the existing terminal box, fixing the new box in position, making good the disturbed wall surface with cement mortar (1:3) to match the existing finish, and providing all necessary fixing materials, steel screws, rawl plugs and other accessories required for proper installation, complete in all respects as specified and directed by the Engineer-in-Charge.Note: The rate shall be deemed to include refixing of existing serviceable switches, socket outlets, fan regulators and other accessories. However, if any switch, socket outlet, fan regulator or other accessory is found unserviceable and requires replacement with a new one, the same shall be measured and paid for separately under the respective BOQ item. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender