Tender For Development Of Original Destination Terminal At Haladipadar, Berhh Ur,Odisha.
Tender Value
1.42 Crore
Estimated cost
Bid Submission
29 Jul 2026
0 days left
EMD
1.42 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Original Destination Terminal At Haladipadar, Berhh Ur,Odisha.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation upto 1.50mtr depth of foundation trenches for columns, basement, tie beams, walls and steps in all kinds of soil including moorum, hard stony earth, earth mixed with boulders, DI rocks etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge. |
| 2 | Extra lift or 1.5m or part there of over the initial lift of 1.5m in all kinds of embankments and road works and ordinary earth work in general. |
| 3 | Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge. |
| 4 | Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. |
| 5 | Providing & laying cement concrete of prop. (1:4:8) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge. |
| 6 | R.C.C. work of M-25 for foundation having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. |
| 7 | R.C.C. work of M-25 for plinth beam having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. |
| 8 | R.C.C. work of M-25 for roof beam and column having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills.Ground Floor |
| 9 | R.C.C. work of M-25 for lintel having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills.Ground Floor |
| 10 | R.C.C. work of M-25 for roof slab having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills.Ground Floor |
| 11 | R.C.C. work of M-25 for staircase having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills.Ground Floor |
| 12 | R.C.C. work of M-25 for chajja having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills.Ground Floor |
| 13 | Providing & fixing TOR Fe-500 D grade reinforcement bars of approved makes as per DTCN for RCC work of required diameter with straightening, cutting, bending, binding welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing fan hooks, hoisting, lowering and laying including cost, conveyance and taxes of tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the drawing, design and direction of Engineer-in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.)Ground Floor |
| 14 | Brick work in foundation and plinth with flyash bricks in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. |
| 15 | Brick work in superstructure with flyash bricks in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge.Ground Floor |
| 16 | Brick work in superstructure with flyash bricks in cement mortar (1:4) with best quality bricks having crushing strength not less than 75 Kg/cm2 imersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge.Ground Floor |
| 17 | Providing vitrified tile flooring using double charged vitrified tiles of premium grade having thick of 8mm to 10mm conforming to IS 13756 of 600mmx600mm coloured / printed series (homogeneous) of approved quality, colour in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge.Ground Floor |
| 18 | Supplying, fitting and fixing of double charged vitrified tiles in skirting of premium grade having thickness of 8mm to 10mm conforming to IS 13756 of 600mmx600mm coloured / printed series (homogeneous) of approved quality, colour of approved quality and size in dadoes in all floors at all heights and riser of steps on 12mmm thick cement plaster (1:3) using screened and washed sharp sand for mortar with grouted Epoxy grout to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, curing-sundries and T&P, etc. required for the work complete as per specification and direction of Engineer-in-charge.Ground Floor |
| 19 | Providing 40cmx40cm size special plain/printed series antiskid ceramic floor tiles of premium grade of approved make having thickness 7mm to 8mm, conforming to IS 13755 for ceramic tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient, grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the ceramic tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as directed by the Engineer-in-charge.Ground Floor |
| 20 | Providing 30cmx45cm size special plain/printed series edge cut ceramic wall tiles of premium grade of approved make having thickness 6.5mm to 6.7mm conforming to IS 13753 of approved make & shade in Dadoes over 12mm thick cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with modular pointing in white cement & pigment to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour curing sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge.Ground Floor |
| 21 | Providing 20mm thick and above 0.40 Sqm size granite stone flooring in staircase of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.Ground Floor |
| 22 | Supplying, fitting and fixing in position 25mm thick cement concrete tile of approved make, quality, colour and size in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient grouted with neat white cement slurry with required quantities of pigments of approved marks watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work complete in all respect as directed by the Engineer-in-charge |
| 23 | Providing and fixing in position well dressed, naturally seasoned sal wood rebated frames of size 125mmx63mm to doors including two coats of hot bitumen applied to rear of frame in contact with masonry or concrete surface fixed with MS hold fast of 35x5mm embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete with all materials, labours, T & P including cost, conveyance, loading, sundries required for the work etc. complete in all respect as directed by the Engineer-in-charge |
| 24 | Supplying fitting and fixing in position 32mm thick flush door with teak wood beading and 1mm thick sunmica to both side pasted with adhessive including fixing of fixtures like Godrej make Mortice lock having model no 9168, Godrej make Door closure having model no 8340, 100mm aluminium hinges, handle, tower bolt, stopper including cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. |
| 25 | Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitered at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size, complete as per manufacturers as per specification and direction of Engineer-in-Charge and Providing and fixing factory made panel 30 mm thick plain PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat molded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on both side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10mm (5mm x 2) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. but excluding GST complete as per direction of Engineer-in-charge. Manufacturer as per specification & drawing. |
| 26 | Supplying, fitting, fixing up window (sliding type) made up powder coated aluminum Section 9778, as windows frame section No. 4095, 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-incharge. |
| 27 | Supplying fitting, fixing fully glazed aluminium framed openable window using 15 micron powder coated aluminium section 2082 as out section, 9139 as mullion section, 4124 as a shutter section frame with tapered clip of section 4125, aluminium angle rubber bedding, fricyion stay and handle etc. with 5mm glass. |
| 28 | Supplying, fitting and fixing of M.S window grills ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge. |
| 29 | Supplying, fitting and fixing of MS openable door with 35 x 35 x 6mm size M.S. angle frame as chowkath and 30x30x5mm Ms frame for shutter with 25x6mm flat fabricated to proper size of door opening with 16 gauge CR sheet including fixing clamps for door frames and hinges for fixing shutters and aldrop with tower bolt etc. complete for all floors including cost, conveyance, taxes of all materials, labour, T&P etc.required for the work etc. complete in all respect as per direction of Engineer-in-charge. |
| 30 | Supplying, Fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification buffing polishing etc with cost conveyance taxes of all materials labour T&P etc required for the complete in all respect. |
| 31 | Providing edge moulding to 18 mm thick granite stone counters, Vanities, steps etc., including machine polishing to edge to give high gloss finish including making three nos of groove over tread etc. complete including cost, coveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge. |
| 32 | Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to inside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge.Ground Floor |
| 33 | Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to outside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge.Ground Floor |
| 34 | Providing 6mm thick plaster in C.M. (1:4) over ceiling, chajja, loft, staircase, column, beams and walls after removing the false if necessary and close deep chipping including rounding of the corners, recess and roughening concrete surface where necessary, watering and curing, finished smooth over R.C.C. surface, including cost, conveyance, royalty, taxes of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge.Ground Floor |
| 35 | Finishing wall surface with Acrylic wall putty to inside surface of approved make and finished smooth and even surface to receive painting to inside surface including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc complete as per direction of Engineer-in-charge.Ground Floor |
| 36 | Finishing wall surface with Acrylic wall putty to outside surface of approved make and finished smooth and even surface to receive painting to inside surface including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc complete as per direction of Engineer-in-charge.Ground Floor |
| 37 | Providing and painting two coats with plastic emulsion paint over a coat of primer of approved quality and approved shade in all floors at all height by making the surface to the interior plastered surface of wall smooth including cost, coveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.Ground Floor |
| 38 | Painting to external surface of building with two coats of weather coat over a coat of primer of approved shade and quality of approved design, after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge.Ground Floor |
| 39 | Providing and painting two coats with synthetic enamel paint over a coat of red oxide primer of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge.Ground Floor |
| 40 | Providing 25mm thick grading concrete in C.C. (1:2:2) laid in proper slope over terrace roof slab by using two part of sand, one part of cement and two parts of 6mm size black hard crusher broken granite chips with addition of water proofing compound of approved quality to be mixed with specified ratio including watering, curing, cost, conveyance, royalties, taxes of all materials, cost of all labour, T&P etc. complete as required for the finished item of work as directed by the Engineer-in-charge.Ground Floor |
| 41 | First Floor |
| 42 | Providing Cleaning the roof top/sunken surface by using manual means with wire brush & chisel to make the surface free from foreign particles & deposit mortar , Sealing of outlet pipe junction with Sikagard 694Fi Epoxy putty and applying two coats of SikaTopseal 109hi. With fiber glass Elastic, liquid applied crack bridging, coloured, 2-pack acrylic-cementitious waterproofing coating system Complete with all respect as per direction of the engineer in charge & manufacturer instructions.Base coat: SikaTop® Seal-109 hi.,Consumption base coat: 0.7 kg/m2..,Top coat: SikaTop® Seal-109 hi.Consumption top coat: 1.5 kg/m2.System requirements: Conforms to IS 2645,IS 101El Elongation at break: 40 %; slant shear bond strength: approx. 4 N/mm2as per FIP 5.15; water permeability passes as per IS 2645; weather resistance as per IS 101.Cl |
| 43 | Providing and injecting chemical emulsion for pre - constructional antitermite treatment as per IS specification and creating a chemical barrier in bottom and sides of foundation trenches, top-surface of plinth filing junction of walls and floors along with external perimeter of the building expansion joints surrounding the pipes and cables etc. complete using approved quality of chemical emulsion of requisite quantity prescribed by the manufacturer as directed by the Engineer-in-charge including cost of all materials and labour taxes etc. complete. (indemnity bond for warranty for 5 years to be furnished) |
| 44 | Supplying all labour, T&P for the Carriage of excavated earth by mechanical means of transport within 5.00 K.M. lead including hire and running charges of vehicles, labour charges for loading and unloading as required for the work etc. complete as per the direction of the Engineer-in-charge. |
| 45 | SECURITY CABINProviding scraping old paints with scrapers, sand papering and washing with soap water or soda including scaffolding, materials labour etc complete as per direction of Engineer-in-charge. |
| 46 | Removing old lime or cement plaster from walls in all floors including raking out joints 12mm deep and removing the debris within 50m lead etc. complete with cost, conveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineering-in-charge/Consultant. |
| 47 | Dismantling brick or stone masonry in cement mortar under 3m height including stacking the useful materials for reuse and removing the debris within 50m lead including cost of all material, labour, conveyance, loading and un-loading, taxes, royalties, sundries, tools and plants, etc., complete as per the direction of the Engineering-in-charge/Consultant. |
| 48 | Dismantalling and removal of old plain cement concrete from foundation, floor etc including stacking of servicable material and removal of debries to an unobjectionable area within 50 mtr lead etc. complete with cost, conveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge |
| 49 | Dismantalling and removal of old reinforced cement concrete from beam, column, slab, lintel, chajja etc including stacking of servicable material and removal of debries to an unobjectionable area within 50 mtr lead etc. complete with cost, conveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge |
| 50 | Dismantalling and removal of old AC/GCI sheet roofing etc including stacking of servicable material and removal of debries to an unobjectionable area within 50 mtr lead etc. complete with cost, conveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge |
| 51 | Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead etc. complete with cost, conveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge |
| 52 | Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead etc. complete with cost, conveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge |
| 53 | Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep and stacking the useful materials for reuse and removing the debris within 50m lead etc. complete with cost, conveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge |
| 54 | Dismantalling and removal of old cement flooring etc including stacking of servicable material and removal of debries to an unobjectionable area within 50 mtr lead etc. complete with cost, conveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge |
| 55 | DISMANTLLINGDismantalling and removal of old steel section from roof window etc including stacking of servicable material and removal of debries to an unobjectionable area within 50 mtr lead etc. complete with cost, conveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge |
| 56 | DRIVEWAYFine dressing of earth work in ordinary or hard soil in ground formaton according to the direction of the Engineer in Charge including cutting or filling earth uptoincluding removal and disposal of top organic soil not exceeding 150 mm in thickness including cost of all material, labour, conveyance, loading and un-loading, taxes, royalties, sundries, tools and plants, etc., complete as per the direction of the Engineering-in-charge/Consultant. |
| 57 | Rolling & compacting to sub grade or formation loosening by cutting earth for 15cm below the sub grade including watering and compacting in layers by PRR, cost & conveyance of required quantity of water, cost of all labour sundries, T & P etc. required for the work to complete in all respect as per specification and direction of Engineer-in-charge. |
| 58 | Construction of granular sub-base by providing Close graded Granular subbase Grading-III material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (4th Revision) etc complete as per direction of Engineer-in-charge. |
| 59 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in subbase/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRT&H Specifications for Road & Bridge works |
| 60 | Supplying and laying of M40 grade heavy duty factory made hydraulically pressed and mechanically compacted free cast interlocking coloured pavers of 80mm thick in approved pattern, coral shaped preparation of sub base with 50mm sand and leveling,laying of interlocking paver block with sand binding and final compaction with plate vibrator finishing the surface including cutting of blocks at the edges with all labour and materials etc complete as per direction of Engineer-in-chrge. |
| 61 | R.C.C. work of M-40 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including hoisting and laying in foundation having minimum compressive strength of 400kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. |
| 62 | Providing & laying Dry Lean Concrete in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge |
| 63 | Providing and laying/sprinkling non metallic heavy duty floor hardener @ 3.0 kg per sqm over the wet concrete including finishing the same as per the direction of the manufacturers specifications. Contractor has to submit the material for approval before each panel pour as per the prescribed consumption factor. Approved Make ; Sika, STP, Fosroc |
| 64 | Providing Vacuum Dewatering Pump to remove the air voids, water for quick setting the concrete, bull floating and striking of, power toweling, adding floor hardener with policing by using disk blade in Trimix flooring including cost of all materials labour T&P etc complete as per direction of Engineer in charge. |
| 65 | Providing & laying bituminious expansion joint 12mm thick as per requirement & instructions of the Engineer-in-charge. |
| 66 | Providing & laying M - 20 grade pre-cast concrete Kerb stones of size 300x300x150 mm thick including setting in cement mortor 1:4 ( 1 cement : 4 coarse sand) and pointing of joints with same mortor etc. complete |
| 67 | R.C.C. work of M-25 for walls having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. |
| 68 | 25 mm. average thick artificial stone flooring with cement punning laid to proper slope with cement concrete of proportion (1:2:4) using screened and washed sharp sand for mortar with black hard crusher broken granite stone chips of approved quality and from approved quarry, washed and cleaned laid in two layers i.e. the bottom layer being 19 mm . thick and top layer of 6mm. thick with 12mm. to 20. size black hard crusher broken stone chips (20mm size chips not to exceed 25%) including chipping and chiseling and cleaning the top surface of the floor slabs in upper floors, including rounding of corners, watering and curing with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge |
| 69 | Providing 12mm. thick cement plaster with cement mortar of mix (1:4) in all floors with Portland slag cement (PSC) and with screened and washed sharp sand for mortar with neat cement punning finished smooth to brick/RCC walls after racking out the joints including watering and curing complete with cost, conveyance, loading and unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P, scaffolding required for the work etc. complete in all respect as per the direction of Engineer-in-Charge. |
| 70 | Supplying and fixing 900mm dia SFRC cover without frame for manhole including cost of all materials, T&P, labour etc complete as per direction of Engineer-in-charge. |
| 71 | Supplying and fixing Stainless steel ladder of approved gauge of 4.0 mtr long and required width inside under ground tank including cost of all materials, labour, T&P etc complete as per approved drawing, design and direction of Engineer-in-charge. |
| 72 | Supplying all materials, labour, T&P for fitting and fixing of water level indicator made of MS flats and plates with lablling etc complete as per direction of Engineer-in-charge. |
| 73 | Supplying all materials, labour, T&P for fitting and fixing of puddle collar of 150mm dia of approved make etc complete as per direction of Engineer-in-charge. |
| 74 | COMPOUND WALLProviding and laying plain cement concrete of (1:2:4) in foundation bed and floors using 12 mm. Size black hard crusher broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required for the work etc complete as per the instruction of the Engineer-in-Charge. |
| 75 | Providing and laying plain cement concrete of (1:2:4) in foundation bed and floors using 12 mm. Size black hard crusher broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required for the work etc complete as per the instruction of the Engineer-in-Charge |
| 76 | Supplying, fitting and fixing of M.S grill gates with top and bottom rails( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge. |
| 77 | Supplying all materials, labour, T&P and necessary materials towards laying of RCC NP2/NP3 Hume pipe push tight joint type (including cost of RCC Hume pipe) inside the pipeline trench of required size with plastic rope without damage to the pipe with all convenience the materials to site and including all taxes all complete as per direction of Engineer-in-charge.300mm Dia NP2 |
| 78 | 450mm Dia NP3 |
| 79 | PH WORKSupplying all materials, labours, T&P for fitting and fixing white glazed vitreous china floor mounted European water closet of Hindware make having cat no 20079 or equivalent type of approved make including supply of matching P/S trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete including cost of WC pan, PVC seat cover with CP brass hinges and rubber buffers etc all complete including cost, taxes and conveyance as per specification including polishing etc all complete as per PH specification and direction of Engineer-in-charge |
| 80 | Supply all materials, labour,T&P for fitting and fixing of PVC cistern of hindware make sleek fresh ISI or equivalent type of approved make complete with all parts and internal fittings of approved make with ISI mark and supplying of necessary brackets, screws etc 32mm dia flush bend, 15mm dia 450mm long PVC water connecting pipe of jaquar make having cat no ALD 803AB with CP or brass union nuts at each end as per PH specification all complete as per direction of Engineer-in-charge. |
| 81 | Supplying all material, labour T&P and fixtures for providing and fixing of white glazed vitreous chinaware counter top wash hand basin of size 79cm dia of Hindware make having cat no 10052 or equivalent type of approved make with bottle trap of Jaquar cat no ALD 769L250 with CP waste coupling nut of Jaquar make having cat no ALD 709 and 15mm x 450mm PVC connection pipe of Jaquar make having cat no ALD 803AB with MS bracket with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge |
| 82 | Supplying and fixing urinal of Hindware make having cat no 60020 or equivalent type of approved make with division plate of hindware make having cat no 61001 or equivalent including all fittings like 450mm long connection pipe of Jaquar make having cat no ALD 803B, 32mm dia bottle trap of jaquar ALD 769L250 etc of approved make etc complete as per PH specification and direction of the Engineer-in-charge. |
| 83 | Supplying all materials, labor T&P for fitting and fixing in all floors' fixed type glass mirror of size 600mm x 450mm best INDIAN make of 5.5 mm thickness with supply of 13mm thick asbestos backing and wooden plugs C. P. Brass screw including cost, conveyance, royalty, taxes of all materials complete as per P.H. specification and direction of Engineering-in-charge. |
| 84 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail - 24\\" of Jaquar Cat. No.-ACN-1111SM or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 85 | Supplying all materials, labour, T&P and fixing standard sized CP towel ring of Jaquar Cat. No.-ACN-1121N or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 86 | Supplying all materials, labour, T&P and fixing standard sized Bib cock short body of Jaquar Cat. No.-FLR-5047N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 87 | Supplying all materials, labour, T&P and fixing standard sized 15mm dia concealed Stop cock of Jaquar Cat. No.-FLR-5083NK with ALD-083 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge |
| 88 | Supplying all materials, labour, T&P and fixing standard sized 15mm dia Angular Stop cock of Jaquar Cat. No.-FLR-5053N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 89 | Supplying all materials, labour, T&P and fixing standard sized pillar cock of Jaquar Cat. No.-FLR-5011N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 90 | Providing all materials, labour,T&P and fittings and fixing of urinal valve auto closing system with built in control cock Jaquar Cat. No.-PRS 077 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 91 | Supplying all materials, labour, T&P and fixing standard sized CP Soap case of Jaquar Cat. No.-ACN-1131N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 92 | Supplying all materials, labour, T&P and fixing two way Bib cock of Jaquar Cat. No.-FLR-5041N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 93 | Supplying all materials, labour, T&P and fixing health faucet of Jaquar Cat. No.-ALD-563 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 94 | Providing and fixing C.P. Glass shelf 600mm long of Jaquar Cat. No.-ACN-1171N or equivalent type of approved make fixed to wall including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 95 | Supplying all materials, labour, T&P and fixing toilet paper holder of Jaquar Cat. No.-ACN-1153S or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 96 | Supplying all materials, labour, T&P and fixing of 150x150mm CP overhead shower of Jaquar Cat. No.-OHS-1789 with arm SHA-483 or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 97 | Supplying all materials, labour, T&P and fixing standard sized CP robe hook of Jaquar Cat. No.-ACN 1191N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 98 | Providing and fixing circular type stainless steel jalli (grating) with hole for floor /nahani trap etc complete as per PH specification and direction of the engineer in charge |
| 99 | Supplying all materials, labours, T&P and fitting and fixing of the following size of CPVC pipe confirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge.15 mm dia |
| 100 | 20 mm dia |
| 101 | 25 mm dia |
| 102 | 32 mm dia |
| 103 | 40 mm dia |
| 104 | 50 mm dia |
| 105 | Supplying all materials, labour, T&P, fitting and fixing UPVC SWR pipes & fittings of approved make confirming to IS-13592, both below and above ground level / floor and on walls including supply of bobbins, nains, screws, wooden cleats, pipe clips as per requirement, including earth work in excavation and fitting, including cuting walls and floor and making good the damages with cement concrete (1:2:4) with hard granite chips, incluidng scaffolding wherever necessary all complete as per the PH specification and direction of the Engineer-in-charge.75mm dia |
| 106 | 110mm dia |
| 107 | 150mm dia |
| 108 | 200mm dia |
| 109 | Supplying all materials, labour, T&P, fitting and fixing of UPVC SWR fittings of approved make with requisite testing etc complete as per PH specification and direction of Engineer-in-charge.110mm dia Single Junction with door |
| 110 | 110mm dia Double Junction with door |
| 111 | 110mm dia Cowl |
| 112 | 110mm dia Plain Bend |
| 113 | 110mm dia SWR Door Bend |
| 114 | 125mm x 110mm Gulley Trap |
| 115 | 110mm dia Tee with door |
| 116 | 110mm dia Single Junction without door |
| 117 | 110mm dia Socket Plug |
| 118 | 110mm dia Pipe clip |
| 119 | 110mm dia Coupler |
| 120 | 75mm dia Plain Bend |
| 121 | Supplying all materials, labour, T&P, fitting & fixing of different size UPVC Ball Valve of approved make including supply of all necessary jointing materials such as red lead paint, yarns etc. including cost, conveyance & taxes of all materials, T&P etc. all complete as per P.H. specification and direction of the Engineer-in-charge.25mm Dia |
| 122 | 32mm Dia |
| 123 | 40mm Dia |
| 124 | 50mm Dia |
| 125 | Supplying all materials,labours,T&P for cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. |
| 126 | Supplying all materials,labours,T&P for cutting holes through existing RCC floors & roofs including making good the damages for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. |
| 127 | Supplying all materials,labours,T&P for cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking SWR/HCI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. |
| 128 | Supplying all materials,labours,T&P for cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per direction of Engineer-in-charge. |
| 129 | Supplying all materials, labour, T&P and fittings and fixing of 2000 LTR Poly Propelene white double layer water storage Tank of approved make confirming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc including hoisting upto terrace level and placing the tank to the required position etc all complete as per PH specification and direction of Engineer-in-charge. (To provided with brick masonary guard walls which will be paid separately) |
| 130 | EXT.PH WorkSupplying all materials, labour, T&P and necessary materials towards laying of RCC NP2 Hume pipe push tight joint type (including cost of RCC Hume pipe) inside the pipeline trench of required size with plastic rope without damage to the pipe with all convenience the materials to site and including all taxes all complete as per direction of Engineer-in-charge.150mm Dia |
| 131 | 200mm Dia |
| 132 | 250mm Dia |
| 133 | 300mm Dia |
| 134 | Providing & fixing P V C sleeve in tanks 75 mm dia nominal bore |
| 135 | 100mm dia nominal bore |
| 136 | 150mm dia nominal bore |
| 137 | Supplyng all materials, labour, T&P for construction of brick masonary Gulley trap chamber of size 250mm x 250 mm with CI gulley trap, by flyash brick masonry in CM (1:4), CP (1:3) with 150mm x 150mm CI grating including labour and materials for fitting and fixing 100mm dia square mouth CI gully trap with supply of all jointing materials and encasing the gully trap with a block of CC (1:3:6) with 25mm size hard stone metal all complete with providing and fixing of 250mm x 250mm precast RCC cover slab including cost, conveyance, taxes of all materials to site complete as per the PH specification and direction of Engineer-in-charge. |
| 138 | Supplying all materials,labours,T&P for constructing inspection chamber of 900mmx800mmx450mm with cement concrete (1:3:6) on bed with hard granite metal size 40mm and flyash brickwork in cement mortar (1:4) in foundation and plinth, 100mm thick RCC M25 cover slab with supplying fitting and fixing of medium duty SFRC manhole cover, moulding and shaping the channel and benching with cement concrete (1:2:4) using 12mm size hg chips,12mm thick cement plaster in cement mortar (1:3) with punning to inside, cement plaster in CM (1:3) to outside the chamber including centring, shuttering, providing required quantity of MS rods and binding wires for reinforcement, bending, binding, tying the grills and placing in the proper position and drawing and design and PH specification including cost, conveyance, royalty, taxes etc for all materials as per the drawing, design and direction of Engineer-in-charge. |
| 139 | Construction of brick masonary inspection chamber of size 1.20 x 0.90 mtr including cement concrete (1:3:6) in bed by using 40mm size granite metal, brickwork in CM (1:4) in foundation & plinth, cement plastering (1:3) over flyash brick, plastering in CM (1:3) with neat cement punning, CC (1:2:4) over bed for benching and channeling, RCC M25 for roof slab of 150mm thick and supply fitting and fixing SFRC medium duty type cover including cost of centring and shuttering cost of MS rod for RCC work, supplying fitting and fixing of the polypropelen step iron of required interval etc all complete with all cost, conveyance, royalties taxes etc all complete as per direction of Engineer-in-charge. |
| 140 | Extra for every additional depth of 0.10mtr or part there of manhole size 1200x900mm from 1100mm to 1650mm depth (data for 0.10 mtr per each) |
| 141 | Providing and laying in trench cement concrete ( 1:4:8 ) with 40mm size hard granite metal in the following type of bedding for pvc pipes of the following internal diameter including curing complete as per specification (A1-Type Bedding)150mm Dia |
| 142 | 200mm Dia |
| 143 | 250mm Dia |
| 144 | 300mm Dia |
| 145 | Providing & laying cement concrete of prop. (1:3:6) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge. |
| 146 | Providing and laying plain cement concrete of (1:2:4) for mending of sewer line trench using 12 mm. Size black hard crusher broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties of all materials and cost of all labours, sundries, T & P required for the work etc complete as per the instruction of the Engineer-in-Charge. |
| 147 | Brick work in foundation and plinth with flyash bricks of size 25x12x8cm in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty of all materials, labour, T&P etc. and as per direction of Engineer in charge. |
| 148 | Providing 12mm. thick cement plaster with cement mortar of mix (1:4) in all floors with Portland slag cement (PSC) and with screened and washed sharp sand for mortar with neat cement punning finished smooth to brick/RCC walls after racking out the joints including watering and curing complete with cost, conveyance, loading and unloading, royalties of all materials, cost of all labour, sundries, T&P, scaffolding required for the work etc. complete in all respect as per the direction of Engineer-in-Charge. |
| 149 | Providing fitting and fixing 20mm OMS step iron .as per the Engineer-in-charge |
| 150 | Providing fitting and fixing 100mm (4\\") dia HCI vent pipe of 1.0mt length with cowl.as per the Engineer-in-charge |
| 151 | Supplying all materials,labours,T&P and constructing 1.22m dia and 2.1m depth soakway pit with precast RCC rings joined loose,gravel backing in the rear of well steining,precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty etc all complete as per approved specification and direction of Engineer-in-charge. |
| 152 | ELECTRICAL WORKSWiringWiring to light points/fan point/exhaust fan point/Call bell point with 1.5-sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non metalic PVC flexible condute with 6Amp, 250V Modular Switch ISI marked and ceiling rose ISI marked mounted on Metal box having front Modular cover of suitable size, metal box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ KEI) Primery point |
| 153 | Secondary point |
| 154 | Call bell point |
| 155 | Air-circulator point specification same as above. |
| 156 | Exhaust fan point specification same as above. |
| 157 | Ceiling fan point consisting of modular regulator of Legrand make model name Myrius or equivalent on existing switch board |
| 158 | Supply and fixing of 6Amp plug with 6amp switch on existing board (Modular type ISI marked) |
| 159 | Point wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular type switch, phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required. (convinient power) (Make of wire-Finolex/ L&T/ Anchor/ Havells/ KEI) |
| 160 | Supply and fixing of modular metal box on surface or recess with suitable size of modular cover in front including providing an fixing of ISI marked 16Amp plug with switch with all conection. |
| 161 | Supply& fixing of Modular type 32/25 Amp one way switch and socket outlet for AC point with metal box and modular cover. |
| 162 | Recessed/surface extra lead submain wiring alongwith earth wire with the folowing size of PVC insulated single core multistrand coper conductor of ISI marked conforming to IS 694/1990 in 20mm dia non metalic heavy duty flexible condute 1.6mm in surface/recessed PVC condute as required (Make of wire-Finolex/ L&T/ Anchor/ Havells/ Great White/ KEI) exceeding to Long point in 2x1.5sqmm + 1x1.5sqmm. |
| 163 | METAL CLAD SOCKETSSupply, installation, testing & commissioning of 3Pin 20A single phase Metal Clad socket with 20A DP MCB, in suitable MS box, plug top with chain as required. |
| 164 | Supply, installation, testing & commissioning of 5 Pin 32A three phase Metal Clad socket and 32A 4P MCB, in suitable MS box, plug top with chain & earth pin as required For workshop & washing area (wiring shall be paid extra) |
| 165 | FLAME-PROOF MOULDED SOCKETSSupply, installation, testing & commissioning of Flame-proof 63A three phase moulded socket (IP44) with 63A 4P Isolator in Flame-proof suitable box (wiring shall be paid extra) |
| 166 | Submains:Recessed/surface submain wiring alongwith earth wire with the following size of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in required dia non metalic heavy duty flexible condute 1.6mm in surface/recessed PVC condute as required. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ Great White/ KEI) 2 x 2.5 sq.mm. + 1 x 1.5 sq.mm. |
| 167 | 2 x 4.0 sq.mm. + 1 x 1.5 sq.mm. |
| 168 | 4 x 4.0 sq.mm. + 2 x 2.5 sq.mm. |
| 169 | 4 x 6.0 sq.mm. + 2 x 2.5 sq.mm. |
| 170 | 4 x 10.0 sq.mm. + 2 x 4.0 sq.mm. |
| 171 | TV/Telephone Wiring:Supply, delivery, installation, testing and commssioning of modular type TV Antenna/Telephone Outlet Boards containing a ISI marked Modular TV Antenna/Telephone Socket fixed on Modular Concealed Box including connections and making good the damages caused complete as required and as per Dierction of Engineer-In-Charge. |
| 172 | Supplying and drawing TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated shielded with fine tined copper braid and protected with FR PVC sheath in existing surface / recessed steel / PVC conduit as required. |
| 173 | Supplying and drawing 2 pair, 0.5 sq.mm FR PVC insulated coper conductor, unarmoured telephone cable in existing surface / recessed steel / PVC conduit as required. |
| 174 | Supply and laying of following size rigid PVC conduit pipe (medium ) through floor / wall / partition with GI spacer clamps or as directd.Rate to include for accessories - bends,sockets T's etc. 20 mm dia |
| 175 | 25 mm dia |
| 176 | Supply, delivery, installation, testing & commissioning of L.T. indoor floor/ wall mounted type distribution boards made out of reputed company IP 43 - #IK 09 with metal door having provision for cable/ conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISS and as per special conditions of contract making good the damages caused complete as per the direction of Engineer-in-charge.8way SPN DB for UPS,incoming ,1 no of RCCB 40A (30mA) 2P,outgoing ,6 nos of 6-32A SP MCB |
| 177 | 4way TPN DB for Light,incoming,1 no of RCCB: 25A (100mA) 4P,outgoing 12 nos of 6-32A SP MCB |
| 178 | 4way TPN DB for AC/Raw Power, Service area,incoming,1 no of 63A 4P MCB ,outgoing, 12 nos of 6-32A SP MCB |
| 179 | 4way SPN DB for Inverter,incoming ,1 no of MCB: 32A (10KA) 2P outgoing,2 nos of 6-32A SP MCB |
| 180 | Fittings & FixturesSupply, delivery, installation, testing & commissioning of Basic all purpose surface and wall mounted 20 watt LED batten with Aluminum housing & integrated electronic driver having THD<20%. (Make: Bajaj/ Philips/ Havells/ Wipro) |
| 181 | Supply, delivery, installation, testing & commissioning of 7w LED Bulb on existin holder. (Make: Bajaj/ Philips/ Crompton/ Havells/Wipro) |
| 182 | Supply, delivery, installation, testing & commissioning of 50w Energy saving, environment friendly & robust IP65 protected LED midbay with PDC housing suitable for ceiling (Surface/Suspended) mount & available in Wide beam optics. (Make: Havells cat no ILIOSBAYPLUSHBP50WLED857SP90DTOPC) |
| 183 | Supply, delivery, installation and testing of 45 wt LED flood light with aluminium housing with all accessories and making conection from suitable point outlet as per the direction of Engineer-in-charge. (Wipro/ Bajaj/ Havells/ Philips) |
| 184 | Supply, delivery, installation, testing & commissioning of 36 watt LED edge-lit luminaire suitable for armstrong/grid ceiling complete for low ceiling applications. (Make: Bajaj/ Philips/ Havells/ Wipro) |
| 185 | Supply, delivery, installation, testing & commissioning of 12 watt Slim-Fit low profile downlights are engineered to deliver superior light output and uniformity utilising the latest edge-lit LED technology. An ideal solution where ceiling voids are limited but high lumen output is required. (Make: Bajaj/ Philips/ Havells/ Wipro) |
| 186 | Supply, delivery, installation, testing & commissioning of aesthetically designed 15 watt LED flat panel for surface mounting which provides soft-light and glare free symmetrical illumination. (Make: Bajaj/ Philips/ Havells/ Wipro). |
| 187 | Supply, delivery, installation, testing & commissioning of 10 watt or above Environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs. (Make: Bajaj/ Philips/ Havells/ Wipro) |
| 188 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, Ceiling Fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. Canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required similar to make Crompton Cat no. Energion HS - 5 Star BEE complete. |
| 189 | Supply, delivery, installation, testing & commissioning of wall mounting fan 400mm sweep (Crompton/ Havells/ Bajaj) |
| 190 | Supply, delivery, installation, testing & commissioning of Wall Mounting 1 Phase air circulator 750mm sweep (Crompton make model name ACVORTEX30WM / Havells/ Bajaj) |
| 191 | Supply, delivery, installation, testing & commissioning of metal Exhaust fan 12\\" sweep (Crompton/ Havells/ Bajaj) |
| 192 | Supply & Fixing of electronic call bell ding dong two modular on entrance door way and as per the direction of Engineer-in-charge or Consultant. |
| 193 | 2KVA INVERTER WITH 90 MINUTE BATTERY BACKUPSupplying, receiving, storing, handling erecting, testing and commissioning of 2.5KVA Inverter with 90Minute battery backup including battery rack within enclousre cabinet |
| 194 | SITC of 55\\" 4K UHD(3840 X 2160) resolution Android LED display with built in 2.4 Ghz Wifi, 1.5 Ghz Built in Quad core processor, 2 GB DDR3 RAM, 8 GB Memory, Wifi Type support 2.4G Nwtwork, Mali G52MC1 GPU, with HDR 10, Dolby Audio, Built in Wifi and Cromecast, HDMI CEC, HDMI ARC, Built-in Bluetooth, 20W built in speakers, HDMI 2.0 X 3, AV X 1, USB X 2, RJ45 X 1, Headphone Out x 1, SPDIF Out x 1, 24/7 operational. Makes: LG, Delta, Panasonic |
| 195 | CABLING WORKCable LayingSupply, laying & testing of following size of PVC insulated, PVC sheathed, round/strip armoured aluminium/cupper conductor power cable of 1100 volt grade clamped on surface of wall/ column/ existing RCC/ stone ware/ masonry cable trench/ cable trey/ through G.I. pipe/ hume pipe as the case may be, including cost of saddles/ clamps/ markers etc and cable end termination but excluding the cost of G. I. pipe/ hume pipe complete with making good the damages caused and returning the balance unused cables to stores as required and as per direction of Engineer-in-charge.3&1/2 core x 95 sqmm A2XFY |
| 196 | 3&1/2 core x 35 sqmm A2XFY |
| 197 | 4 core x 10 sqmm A2XWY |
| 198 | 3&1/2 core x 25 sqmm A2XFY |
| 199 | Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required.3&1/2 core x 95 sqmm A2XFY |
| 200 | 4 core x 10 sqmm A2XWY |
| 201 | 3&1/2 core x 35 sqmm A2XWY |
| 202 | 3&1/2 core x 25 sqmm A2XFY |
| 203 | Supplying and fixing of following dia ISI marked HDPE pipe with material grade PE-80 in ground/recess including excavation the earthl and making good the same in case of recessed conduit as required.40mm OD PN-8, 3 mm thick |
| 204 | Supply, delivery and laying of floowing sizes of RCC Hume pipe at a depth of 1000mm Ground level for cable laying as required including cost of all accessories, jointing, masonry inspection chamber at both ends etc complete as per direction of Engineer-in-charge.150mm dia RCC Hume pipe |
| 205 | Supply, delivery, installation, testing & commissioning of L.T. Indoor floor / wall mounted type Distribution Board made out of 2 mm thick CR sheet metal cubicle with front side hinges glass door for every meter compartment, the cabinet have a common bus bar, duly acid treated for derusting, primered and painted with 2 coats of enamel paint of approved shade; dust, damp & vermin proof powder coated; having hinged door and compartmental arrangement for each equipment & busbar chamber on the top of the panel; having provision for cable/ conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISS and as per special conditions of contract making good the damages caused complete as per the direction of Engineer-in-Charge.MAIN L.T. DISTRIBUTION PANEL :Incoming: MCCB: 125-A (16kA) 4P Thermal Magnetic Release (Apr 2022)CHANGE OVER SWITCH : 1 no 125A 4P On Load Change Over Switch.Rotary Handle (Very Depth) (Apr 2022)Spreader links (Apr 2022)Outgoing:MCCB: 100-A (16kA) 4P Thermal Magnetic Release (Apr 2022)MCCB: 63-A (16kA) 4P Thermal Magnetic Release (Apr 2022)Rotary Handle (Very Depth) (Apr 2022)Spreader links (Apr 2022)MCB 'C': 1 No 63A 10kA 4P ( Apr 2022)MCB 'C': 1 No 32A 10kA 4P ( Apr 2022)MCB 'C' 10kA: 63-A 2P ( Apr 2022)Instruments:1 Set of LED type RYB phase indicating lamps with control fuses & 1no multi function meter with required CT's |
| 206 | SUBSTATION PANEL: Incoming:MCCB: 1 No 125A (25kA) 4P thermal magnetic(TM) release with ROM & spreader links.Instruments: 1 Set of LED type RYB phase indicating lamps with control fuses & 1no multi function meter with required CT's |
| 207 | EARTHING WORKEarthing with Copper Earth Plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required as per the direction of Engineer-in-charge. |
| 208 | Earthing with G.I. Earth Plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required and as per the direction of Engineer in charge. |
| 209 | Earthing with G.I earth pipe 4.5 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required |
| 210 | Providing and fixing of 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. |
| 211 | Providing and fixing of 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 212 | Providing and fixing 4.00 mm dia hard drawn bare copper wire on surface or in recess for loop earthing as required. |
| 213 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 214 | ILLUMINATION WORKFeeder Panel with timer Supply, delivery, installation, testing & commissioning of L.T. Indoor floor / wall mounted type Distribution Board made out of 2 mm thick CR sheet metal cubicle with front side hinges glass door for every meter compartment, the cabinet have a common bus bar, duly acid treated for derusting, primered and painted with 2 coats of enamel paint of approved shade; dust, damp & vermin proof powder coated; having hinged door and compartmental arrangement for each equipment & busbar chamber on the top of the panel; having provision for cable/ conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISS and as per special conditions of contract making good the damages caused complete as per the direction of Engineer-in-Charge.Incoming: 1 no 63A 4P MCCB (16 KA) type followed by 1 No 63-A 4 NO power contactor with Bypass Toggle switch & timer.Bus bars: 4 Nos.20x3mm E C Strips.Outgoing: 4 Nos 40/63-A, 4P MCB 'C' (10kA). 4 nos 40/63 Amp 2P MCB 'C' (10 KA). Complete duly factory wired as per SLD. Cable & wires. |
| 215 | Junction BoxSupply, installation and testing of Cable Junction Boxes IP 66/67 “weather proof”, for outdoor installation with terminals, made of high quality Thermoplastic for cable size 10-16sqmm and box size 155mm x 210mm x 92mm (Hensel make or equivalent) |
| 216 | CABLES & ACCESSORIESupply, laying & testing of following size of PVC insulated, PVC sheathed, round armoured aluminium conductor power cable of 1100 volt grade laid on surface of wall / column / existing RCC / stone ware / masonry cable trench / cable trey / through G.I. pipe / hume pipe as the case may be, including cost of saddles / clamps / markers etc but excluding the cost of G. I. pipe / hume pipe complete with making good the damages caused and returning the balance unused cables to stores as required and as per direction of Engineer-in-charge.3c x 2.5 Sq. mm flexible Copper cable for connection of lamp from JB |
| 217 | 2c x 10 Sq. mm Aluminum armoured cable. |
| 218 | 4c x 10 Sq. mm Aluminum armoured cable. |
| 219 | Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required. |
| 220 | STREET LIGHT :Supply, installation, testing & commissioning of 8 mtr high hot dip galvanised octagonal poles with 155 mm bottom A/F & 70mm top A/F made up of 3mm thk. HT sheet along with base plate of size 260X260X16mm thk. PCD - 250 mm with M24 x 750 mm “J” foundation bolt & 1.5Mtr Length Single Bracket Made of 40 NB GI Pipe with 2 Nos of 6 amp MCB with Bakelite complete as per direction of Engineer-in-charge. |
| 221 | Supply, installation, testing & commissioning of 90 watt IP66, IK 07 street light, compact and aesthetic aluminium powder coated housing with precise street optic lens similar to make Panasonic PSTM 22908 R2 complete as per direction of Engineer-in-charge. |
| 222 | LIGHTNING ARRESTORSupply of Active Lightening arrestor of Class A for building protection .It shall work on early streamer Emission princeple & shall be made of stain less steel with a ∆T of 60 micro sec(79 mtr radious) A non reset table type counter (FLASH COUNTER) shall also be supplied to count the number of lighting occurrences. (Make: ABB/Erico/ OBO/ CAPE) |
| 223 | Supply of mounting plate for mast of 3 mtr with guy wire & base plate |
| 224 | Supply of flash counter for the above device |
| 225 | Supply of all materials, installation & testing of Copper safe earth electode ( chemical earthing) with earthing electode of 3 metre long 50mm diameter hot dip galvanised pipe confirming IS:3043 including cost of 50kg chemical filling compound, masonary enclosure, C I cover, labour charges for excavation of pit in all kinds of soil complete as required. |
| 226 | Supply of materials and laying under ground / floor through GI pipe and fixing to the wall supported on porcelain base insulators at an interval not exceeding 500mm including making connection to plate earthing and required brazing at joints with 70 sqmm copper cables for earthing of Lightening Arrestor as required comlete as per direction of Engineer-in-charge. |
| 227 | Installation of Class A device on the top of building. The device shall be installed at a height of about 3 mtrs from the roof top of the building using a GI mast. The device shall be connected to the earth pit using copper tape of 25 mm x 3 mm or better. This copper tape shall be run firmly along the side of the mast with the help of spacers.It shall also be ensured that this down conductor shall not touch the building throughout. The down conductor shall be connected to the earth electrode using Exothermic welding. A counter shall be installed at an appropriate place to count the number of occurrences. All the accessories like spacers, welding materialetc required for the installation shall be arranged by the ABB or equivalent only. |
| 228 | IP SURVILIANCE SYSTEMSITC of 4MP Dome/Bullet IR Network Camera (1/3\\" CMOS sensor, Mini. Pixel of 2688*1520 or higher video quality, frame rate of Up to 25fps, Ultra 265, H.265, H.264 & MJPEg video compression, 2.8mm Fixed lens, physical ICR filter of both day and night, 30mtr IR Distance,120dB WDR ,3Streams Supported, WDR , 3D-DNR for noise reduction, BLC, ICR, EXIR, Audio In and Out, Alam in and Out. IPv4/IPv6 network supported, IP67, IK10 rated for weatherproofing, ONVIF ver 2.2 or higher, PoE IEEE 802. 3af (UL, FCC, CE, BIS and STQC compliantcertified.) with accessories as require. Make- Prama, Uneeviu, CP Plus |
| 229 | SITC of 16Ch Network Video Recorder, Support Ultra H.265/H.265/H.264 video formats Supports mainstream cameras of ONVIF conformance(Profile S, Profile G, Profile T and RTSP protocols. Support 2-ch HDMI, 1-ch VGA. HDMI1 and HDMI2 up to 4K (3840x2160) resolution Up to 12 Megapixels resolution recording. Support RAID 0, 1, 5, 6, 10, 8 SATA HDDs, Up to 10TB for each HDD. Support cloud upgrade. Make- Prama, Uneeviu, CP Plus |
| 230 | SITC of Surveillance HDD 8 TB. Preferred Makes: Seagate/ WD Purple. |
| 231 | SITC of Cat6 Outdoor Double Jacket cable through existing conduit. The cable should have 23AWG Solid Bare Copper Conductors, 4Pair stranded over PE cross Separator, Rip cord, Inner sheath FRPVC and Outer sheath Polyethylene ,Transmission requirements of TIA/EIA 568 C.2 & ISO/IEC 11801 and RoHS Compliant ,Inner Sheath: FRPVC ,Outer Sheath: PE, Black. Conductor Diameter : 0.55 ± 0.02 mm(23 AWG) ,Diameter Over Outer Sheath : 7.5 ± 0.50mm. ,Outer Jacket Thickness: 0.56 mm ± 0.01mm,Performance specification up to 250 Mhz ,Packaged in a wooden reel ,Attenuation : 32.8 db/100m at 250 MHz Return Loss : 17.3 dB at 250 Mhz, Cable should support operating Temperature from -20°C up to +70°C. Make: Legrand, Tyco, Digisol |
| 232 | SITC of 6U/500D Wall Mount Rack with Accessories: The rack size should be 600W x 500D, Front frame integrated with top, bottom, front and two side panels for better rigidity and strength, Front Glass Door with Lock loaded, Compliance with standards shall be UL 2416., DIN 41494, IEC EN 60529, IEC EN 62262 , IEC EN 60068-2-11 , ISO 9001:2008 including Power Distribution Unit (06/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Lengt), 1 cooling Fan(230V AC - 90 CFM, dB 42), 2nos 1U Metal Cable manager with Plastic cable loops and H/W screw. Preferred. Makes: Valrack, Rittal, APW |
| 233 | SITC of Cat6A UTP Industrial Plug for Camera Connectivity. Make: Tyco, Digisol, Legrand |
| 234 | SITC of 32\\" 4K UHD(3840 X 2160) resolution Android LED display with built in 2.4 Ghz Wifi, 1.5 Ghz Built in Quad core processor, 2 GB DDR3 RAM, 8 GB Memory, Wifi Type support 2.4G Nwtwork, Mali G52MC1 GPU, with HDR 10, Dolby Audio, Built in Wifi and Cromecast, HDMI CEC, HDMI ARC, Built-in Bluetooth, 20W built in speakers, HDMI 2.0 X 3, AV X 1, USB X 2, RJ45 X 1, Headphone Out x 1, SPDIF Out x 1, 24/7 operational. Makes: LG, Delta, Panasonic |
| 235 | SITC of HDMI Cable with 4K Supported, 15Mtr length. |
| 236 | AIR CONDITIONINGSupply of Hiwall Split air conditioners including Inverter compressor, condenser, supports, with cordless remote controller, refrigerant gas, drain pump, etc as per the specifications of the following capacities. Inverter 3 star rating. Refrigerant gas shall be of R410A / R32.1.5 TR 3 Star |
| 237 | Supply of ODU Bracket for Hi-Wall, Cassette .including all cost of labour & material.ODU bracket ( Upto - 2.0 TR ) |
| 238 | DG INSTALATION (20KVA)Supply of 20 KVA, 415 Volts (3-Phase) DG Set comprising of Cummins make engine model 4BTAA3.3-G11 developing 84 BHP and 20 KVA Stamford make alternator mounted on a common base, complete with:Fuel tank,Batterry and leads,Residencial silencer,AMF controll panel,First fill of lube oil and colant,AVM pads,Acoustic Enclosure. |
| 239 | TRANSFORMAR INSTALLATIONWPB 160x152 (11 Mtr. long 3.44 Kg/Mtr.) |
| 240 | 100x50x6 G.I Channel |
| 241 | 75x40x4.8mm G.I Channel |
| 242 | 50x6 Fish plate (GI) |
| 243 | 100 X 50 X 6 MM(GI) |
| 244 | 50X50X6 |
| 245 | 100 X 50 X 6 MM(GI)for AB sw support |
| 246 | AB Switch (11KV,400A,3 Pole,50Hz) |
| 247 | 11 KV HG fuse |
| 248 | 11 KV LA |
| 249 | Supplying and laying of 185 mm2x3.5 LT cable to be laid from DTR to S/S Panel and S/S to MDB |
| 250 | Supply and laying of 95 mm2 11 KV 3 core armoured U.G cable (including spare) |
| 251 | Excavation of cable trench in all kind of soil including Rockey soil |
| 252 | Supply and laying of 160 mm HDPE pipe |
| 253 | LT distribution box for 63 KVA sub-station with 125 A MCCB with Thermal Magnetic Relay |
| 254 | GI Pipe earthing 40mm, 3 mtr long. |
| 255 | 50x6mm GI Flat for earthing, 2.36kg/mtr, 12.5 Mtr for LA and 3 mtr for for AB Switch Body, 2.5 mtr for mesh information and 2.5 mtr for raising= 20.5x2.36 |
| 256 | 11KV Pin Insulator Polymer |
| 257 | H W fitting (B&S)70KN, 3 Bolt |
| 258 | Disc insulator (B&S) 70 KN Polymer |
| 259 | Aluminium binding wires/tapes |
| 260 | GI Nut, Bolt & washer of different sizes(7.433 Kg each Cut Pole) |
| 261 | Concrete ratio 1:1.5:3 ( 500mmx500mmx1800mm) = 0.45 Cu.mtr |
| 262 | Concrete ratio 1:1.5:3 with demension ( 500x500x450mm) = 0.113 Cu.mtr |
| 263 | Danger plate |
| 264 | Back Clamp for danger Plate 25x3mm flat, 0.59Kg/Mtr, Flat of 0.510Mtr length 8 nos=(8x0.59x0.5 |
| 265 | 7/10 SWG stay wire 15 kg/ stay |
| 266 | Black paint |
| 267 | Yellow Colour paint for background |
| 268 | Plinth for S/S panel |
| 269 | 63 KVA, 11/0.4 KV Transformer |
| 270 | Construction earthing chamber including installation of earthing pipe making earthing chamber including excavation, soil treatment with bentonide powder, calculation of earth resistance, including installation of 3 mtr GI Pipe 40mm/50mm including welding of GI flat around pipe. |
| 271 | Fixing of stay including rod and plate |
| 272 | Supply and fixing of Lugs, Nut Bolt etc. |
| 273 | Supply and fixing of outdoor end termination kit heat shrinkable typesuitable for 11 KV 3 core 95 mm2 HT UG cable Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender