Tender For Comprehensive Maintenance Of Lt Ug Cable, Mccbs, Lt Switch Gear, Lt Panels, Servicing Of Transformer, Vcb And Other Misc External Electric Works At Diber Haldwani
Tender Value
Ref. Documents
Estimated cost
Bid Submission
04 Aug 2026
14 days left
EMD
18000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
haldwani → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Comprehensive Maintenance Of Lt Ug Cable, Mccbs, Lt Switch Gear, Lt Panels, Servicing Of Transformer, Vcb And Other Misc External Electric Works At Diber Haldwani
BOQ
| Sl. No. | Item Description |
| 1 | Contract Details |
| 2 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth for taking out/for laying under ground cables/pipes etc and getting out any type soil all as dircted |
| 3 | Returning filling in including spreading, levelling, watering and well ramming in layers n-exc 25 cm |
| 4 | Removing excavated soil to a distance n-exc 50 mtr and depositing where directed at a level n-exc 1.5 mtr above the starting point |
| 5 | Supply and spreading fine river sand in trenches for cushioning of under ground cable/filling cable ducts all as directed by Engr-in-Charge at site Note : - Only punned thickness shall be measured for payment purpose |
| 6 | Supply and laying common burnt clay building bricks sub class \\"B\\" designation 75 old size bricks for cable protection |
| 7 | Supply and laying in replacement GI steel tubing light grade (IS-1239) of dia 50 mm with all fittings in trenches/under roads/along pole/wall for protection of Cable/GI wire/ GI strip etc all as specified and directed. |
| 8 | Supply & Fixing LED Flood light fitting 100 W 230 V AC outdoor type pressure die cast aluminium IP66 luminaire with high power LED as light source and electronic driver with impact and corrosion resisant including clamp and GI bracket light grade and provn of electric supply to fitting from source by means of PVC Sheathed multi-stranded aluminium conductor cable of 2 x 4sqmm core complete all as specified and directed . Make Havells, Bajaj, Crompton |
| 9 | Supply and fix MCCB 415 volts, 3 phase, 50 Hz, 4 pole of capacity 63 Amps 16 KA thermal adjustable and fixed magnetic including taking down old unseviceable MCCB all as directed by Engr-in-Charge. Make : L&T/Legrand/ABB |
| 10 | Supply and fix MCCB 415 volts, 3 phase, 50 Hz, 4 pole of capacity 100 Amps 16 KA fixed thermal and fixed magnetic including taking down old unseviceable MCCB all as directed by Engr-in-Charge. Make : L&T/Legrand/ABB |
| 11 | Supply and fix MCCB 415 volts, 3 phase, 50 Hz, 4 pole of capacity 125 Amps 16 KA fixed thermal and fixed magnetic including taking down old unseviceable MCCB all as directed by Engr-in-Charge. Make : L&T/Legrand/ABB |
| 12 | Supply and fix MCCB 415 volts, 3 phase, 50 Hz, 4 pole of capacity 200 Amps 25 KA adjustable thermal and adjustable magnetic including taking down old unseviceable MCCB all as directed by Engr-in-Charge. Make :L&T/Legrand/ABB |
| 13 | Supply and fix MCCB 415 volts, 3 phase, 50 Hz, 4 pole of capacity 250 Amps 25 KA adjustable thermal and adjustable magnetic including taking down old unseviceable MCCB all as directed by Engr-in-Charge. Make :L&T/Legrand/ABB |
| 14 | Supply and fix MCCB 415 volts, 3 phase, 50 Hz, 4 pole of capacity 400 Amps 36 KA adjustable thermal and adjustable magnetic including taking down old unseviceable MCCB all as directed by Engr-in-Charge. Make : L&T/Legrand/ABB |
| 15 | Supply, laying and connecting up armoured LT XLPE insulated heavy duty electric cable with aluminium stranded conductor, 1100 volts grade, cross sectional area 4 core 16 sq mm including taking out old unserviceable cable all as directed. |
| 16 | All as per item No 15 above but 10 sq mm 4 core |
| 17 | All as per item No 15 above but 35 sq mm 3.5 core |
| 18 | All as per item No 15 above but 70 sq mm 3.5 core |
| 19 | All as per item No 15 above but 95 sq mm 3.5 core |
| 20 | Material and labour for installation of complete electrical interlocking setup of two Electric supply in one LT panel i.e One ACB for Main UPCL supply and another ACB for DG supply and after installation ensuring that both supply are not collide to each other the cost included all the minor parts ,wiring, labours etc complete all as specified and directed by Eng-in- charge. |
| 21 | Supply and fix LED Voltmeter 3 phase, Class-1.0 with inbuilt selector switch of make L&T or its equivalent make |
| 22 | Supply and fix LED Ammeter 3 phase, Class-1.0 with inbuilt selector switch ofmake L&T or its equivalent make |
| 23 | Taking out the LT air circuit breakers up to 1000 Amps capacity AC 440 volts from existing panel for repairs and replacement of worn out parts including complete servicing and refixing in original position testing & commissioning complete all as specified and as directed Note :- Spares will be measured and paid separately |
| 24 | Supply only adaptor type terminal of capacity upto1000 Amps |
| 25 | Supply only trip indication switch of capacity upto 1000 amps |
| 26 | Supply only shunt trip/closing coil 220 VAC/415 VAC |
| 27 | Supply only Under Voltage Trip device (UVT) 415 Volt AC |
| 28 | Supply only earth fault release indication of capacity upto 1000 amps |
| 29 | Supply only Main CTs upto 1000 Amps |
| 30 | Supply only Neutral CTs upto 1000 Amps |
| 31 | Supply only On/Off push button of capacity upto 1000 amps |
| 32 | Supply only spring charging indication switch |
| 33 | Supply and fixing of Indicating lamp assembly complete LED type of colour red,yellow,blue,green complete all as directed |
| 34 | Supply only LT selector switch for ampermeter/voltmeter complete all as specified. Make-Salzer or equvalent. |
| 35 | Providing and fixing earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. Details of cost for one Set |
| 36 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc.as required. |
| 37 | Providing and fixing earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. Details of cost for one Set |
| 38 | Providing and fixing 25 mmX 5 mm copper strip on surface or in recess for connection etc. as required. |
| 39 | Supply, jointing and testing cable termination jointing kit Heat shrinkable type (Earthed) for straight through suitable for 3 core 120 Sq mm to 185 sqmm 11000 volts grade for under ground XLPE cable complete with jointing material and accessories including taking out old unserviceable jointing kit. Make: Raychem/ M Seal/Denson |
| 40 | Supply, jointing and testing cable termination jointing kit Heat shrinkable type (Earthed) for outdoor termination suitable for 3 core 120 Sq mm to 185 sqmm 11000 volts grade for under ground XLPE cable outdoor type complete with jointing material and accessories including taking out old unserviceable jointing kit. Make: Raychem/ M Seal/Denson |
| 41 | Supply, jointing and testing cable termination jointing kit Heat shrinkable type (Earthed) for indoor termination suitable for 3 core 120 Sq mm to 185 sqmm 11000 volts grade for under ground XLPE cable indoor type complete with jointing material and accessories including taking out old unserviceable jointing kit. Make: Raychem/ M Seal/Denson Please Enable Macros to View BoQ information |
| 42 | Supply, jointing and testing cable termination jointing kit Heat shrinkable type (Earthed) for indoor termination suitable for 3 core 120 Sq mm to 185 sqmm 11000 volts grade for under ground XLPE cable indoor type complete with jointing material and accessories including taking out old unserviceable jointing kit. Make: Raychem/ M Seal/Denson Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender