Tender For Dismantling The Existing Damaged Mini Water Tank At Aarachipatti Pillayar Kovil Street,Koonamkulam Nadu Street,Settiyakudi Street Ward No: 11,12,20 In Srivilliputhur Municipality
Tender Value
2.30 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
13 days left
EMD
2300
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Virudhunagar → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Dismantling The Existing Damaged Mini Water Tank At Aarachipatti Pillayar Kovil Street,Koonamkulam Nadu Street,Settiyakudi Street Ward No: 11,12,20 In Srivilliputhur Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling the exisinting damaged RCC Structure and Remove form site including cost of labour and all other cost and conveyance etc complete |
| 2 | Dismantling the exisinting damaged Brick Work in CM and Remove form site including cost of labour and all other cost and conveyance etc complete |
| 3 | Supplying and delivery of 1.5 H.p belt compressor with motor pump set as per IS 8024/2002 including all other material and erection labour charge ect complete (Rate Taken By Quotation) |
| 4 | Supply and delivery of PVC superthic pipe including cost and conveyance.25mm HDPE Hose |
| 5 | 25mm GI Pipe |
| 6 | 15mm HDPE Pipe |
| 7 | 25mm GI coupling |
| 8 | 15mm GI Coupling |
| 9 | 25 mm G.I.Elbow |
| 10 | 15 mm G.I.Elbow |
| 11 | 15mm GI pipe |
| 12 | 25mm GI Union |
| 13 | 20mm GM ball valve |
| 14 | MS bore cover 5\\" |
| 15 | Supply and fixing of 1000 litre capacity HDPE tank with ISI make etc., complete |
| 16 | Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains including cost and convyenace etc. complete. ( |
| 17 | Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains including cost and conveyance etc. complete. |
| 18 | Supply and run of 25mm x6mm tinned copper flat with necessary clamps /supports on wall /floor /ground for earth connection |
| 19 | Errection charges of 1.5 HP compressor motor with pumpset including all other accessories and Labour charges ect complete(Rate taken By Quoatation) |
| 20 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum |
| 21 | Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 22 | Brick work in CM 1:5 (one cement & five sand) using Third Class Country Brick Kiln Burnt of size 8\\"X41/4\\"X 2 3/4\\" including finishing, curing, etc., complete complying with standard specification - 100CFT |
| 23 | Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. |
| 24 | Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 |
| 25 | Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors as per standard specification. |
| 26 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials) Floor |
| 27 | Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 28 | Dadooing walls with Glazed tiles of sizes 305mm X200mm X 6mm size of approved make and quality and colour l Set in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
TodayJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender