Tender For Construction Of Mini Community Sanitary Complex At Government High School In Korkai Panchayat At Mayiladuthurai Block
Tender Value
8.21 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
1 days left
EMD
8300
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mayiladuthurai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Mini Community Sanitary Complex At Government High School In Korkai Panchayat At Mayiladuthurai Block
BOQ
| Sl. No. | Item Description |
| 1 | Construction of MINI CSC at Government High school in Korkai panchayat at Mayiladuthurai Block |
| 2 | Earthwork Excavation in Hard Soil - Earthwork excavating and depositing with in initial lead of 10m and lift of 2m (For roads, supply channels, desilting of MI Tanks, Pond & Kulam) - upto 0.30m depth |
| 3 | Collection and supply of Sand and filling into the basement including cost and conveyance to the site and all labour charges for filling as per standard specification. |
| 4 | Cement mortar 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete for 10 cum |
| 5 | Brick work in cement mortar 1:5 mix using country bricks 83/4x41/4x23/4 and conveyance of all materials to site and all labour charges etc complete (Below Basement) |
| 6 | Brick work in cement mortar 1:5 mix using country bricks 83/4x41/4x23/4 and conveyance of all materials to site and all labour charges etc complete (above Basement) |
| 7 | Plastering with cm 1:5 mix( one cement and Five sand ) to 12 mm thick including cost and conveyance of all materials in all floors etc.,as directed by departmental officers etc, complete complying with standard specifications. |
| 8 | Supplying and erecting centering shuttering including necessary supports for plane surface in foundation and basement and in all floors for R C C column footing column plinth beam, beams, roof slabs, staircase steps, bed blocks, critical pier etc using mild steel sheets of size 90 x 60 cm and 10 guage stiffened, welded with mild steel angles of size 25mmx25mmx3mm for boarding laid over silver oak (country wood) scantlings of size 10cm x 6.5cm spaced of about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre complete complying with standard specifications and as directed by departmental officers including conveyance of all materials to site and proper centering etc complete. |
| 9 | Supplying and erecting centering shuttering including necessary supports for plane surface in foundation and basement and in all floors for R C C column footing column plinth beam, beams, roof slabs, staircase steps, bed blocks, critical pier etc using mild steel sheets of size 90 x 60 cm and 10 guage stiffened, welded with mild steel angles of size 25mmx25mmx3mm for boarding laid over silver oak (country wood) scantlings of size 10cm x 6.5cm spaced of about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre complete complying with standard specifications and as directed by departmental officers including conveyance of all materials to site and proper centering etc complete. |
| 10 | Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal (Using M-Sand) including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete (blow Basement) |
| 11 | Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal (Using M-Sand) including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete (above Basement) |
| 12 | Supply and fabrication of steel including cost and conveyance of steels from godown to worksite including labour for cutting, jointing and welding is necessary including labour for dying with binding wire and labour for placing in position as directed by departmental officers, including all labour and all other incidental charges etc., complete for all R.C.C items. |
| 13 | Paving the Floor with scratch proof ceromic tiles of size 305x305x6mm including cost and conveyance of all materials to site and all labour charges etc complete |
| 14 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work |
| 15 | Finishing the top of roof with Best quality vitrified tiles of size 600mm x 600mm x 8mm of approved colour, shade & quality laid in CM 1:3 20mm thick and pointed with white cement mixed same colour pigments etc., and 2% of water proffing compound by weight of cement complying with standard specification. |
| 16 | Daddooing with wall tiles of any siize including cost and conveyance of all materials to site and all labour charges etc complete |
| 17 | Supplying, fabricating, erecting structural steel works |
| 18 | Supplying and fixing Polycarbonate 6mm thick and steel tubular box section of 100x50x3mm of 1meter interval including priming coat fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers. |
| 19 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level weldedto 38mm dia Stainless Steel pipe post of 1.00mm thickas vertical at 900mm centre with 2 Nos. of 25mm diaintermediate horizontalto the railing. |
| 20 | Painting the walls with two coats of oil bound distember over one coat water based cement primer including cost for distember ,primer,cleaniong and scrapping the walls rendering theb walls smooth with necessory putty,brushes, scaffolding arrangements,labourb chareges,etc., |
| 21 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 22 | Cost and Supply of IWC |
| 23 | Supplying and fixing 0.9 m dia RCC Ring for leach pit including all the charges etc complete |
| 24 | Provision for sanitary arrangements |
| 25 | 110mm dia pvc pipe |
| 26 | Supplying and fixing RCC Cover Slab including all the charges etc complete |
| 27 | Solid PVC Door Shutters using 19 Gauge 19mm MSsquare tubes for styles and outer frames. 15mm MSsquare tubes for top, lock and bottom rails. The steeltubes shall be covered with 5mm thick solid PVC Sheets.Shutter using 5mm thick solid PVC Sheets for panellingshall rigidly fixed in position including necessary furnitureand fittings. The over all size of styles shall be 50mm x30mm. The over all size of top rail, lock rail and bottomrail shall be 75mm x 30mm. The over all size of framesshall be 50mm x 45mm with suitable rabate for housingthe shutter |
| 28 | Supply and delivery and fixing of HDPE tank asper IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixingof the GI pipes and specials for pipe connectionworks including cutting, threading and fixingcharges etc. |
| 29 | Provision for Name Board |
| 30 | Provision for photo charges |
| 31 | Towords internal water supply arrangements (taps for toilet unit and electrification) |
| 32 | GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender