Tender For Construction Of Mini Community Sanitary Complex Near Phc In Anathandavapuram Panchayat At Mayiladuthurai Block
Tender Value
4.83 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
1 days left
EMD
4900
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mayiladuthurai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Mini Community Sanitary Complex Near Phc In Anathandavapuram Panchayat At Mayiladuthurai Block
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Mini csc Near PHC in Anathandavapuram panchayat at Mayiladuthurai Block |
| 2 | Earthwork Excavation in Hard Soil - Earthwork excavating and depositing with in initial lead of 10m and lift of 2m (For roads, supply channels, desilting of MI Tanks, Pond & Kulam) - upto 0.30m depth |
| 3 | Collection and supply of Sand and filling into the basement including cost and conveyance to the site and all labour charges for filling as per standard specification. |
| 4 | Cement mortar 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete for 10 cum |
| 5 | Brick work in cement mortar 1:5 mix using country bricks 83/4x41/4x23/4 and conveyance of all materials to site and all labour charges etc complete (Below Basement) |
| 6 | Brick work in cement mortar 1:5 mix using country bricks 83/4x41/4x23/4 and conveyance of all materials to site and all labour charges etc complete (above Basement) |
| 7 | Plastering with cm 1:5 mix( one cement and Five sand ) to 12 mm thick including cost and conveyance of all materials in all floors etc.,as directed by departmental officers etc, complete complying with standard specifications. |
| 8 | Supplying and erecting centering shuttering including necessary supports for plane surface in foundation and basement and in all floors for R C C column footing column plinth beam, beams, roof slabs, staircase steps, bed blocks, critical pier etc using mild steel sheets of size 90 x 60 cm and 10 guage stiffened, welded with mild steel angles of size 25mmx25mmx3mm for boarding laid over silver oak (country wood) scantlings of size 10cm x 6.5cm spaced of about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre complete complying with standard specifications and as directed by departmental officers including conveyance of all materials to site and proper centering etc complete. |
| 9 | Supplying and erecting centering shuttering including necessary supports for plane surface in foundation and basement and in all floors for R C C column footing column plinth beam, beams, roof slabs, staircase steps, bed blocks, critical pier etc using mild steel sheets of size 90 x 60 cm and 10 guage stiffened, welded with mild steel angles of size 25mmx25mmx3mm for boarding laid over silver oak (country wood) scantlings of size 10cm x 6.5cm spaced of about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre complete complying with standard specifications and as directed by departmental officers including conveyance of all materials to site and proper centering etc complete. |
| 10 | Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal (Using M-Sand) including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete (blow Basement) |
| 11 | Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal (Using M-Sand) including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete (above Basement) |
| 12 | Supply and fabrication of steel including cost and conveyance of steels from godown to worksite including labour for cutting, jointing and welding is necessary including labour for dying with binding wire and labour for placing in position as directed by departmental officers, including all labour and all other incidental charges etc., complete for all R.C.C items. |
| 13 | Paving the Floor with scratch proof ceromic tiles of size 305x305x6mm including cost and conveyance of all materials to site and all labour charges etc complete |
| 14 | Daddooing with wall tiles of any siize including cost and conveyance of all materials to site and all labour charges etc complete |
| 15 | color washig tow coats usingapproved colour pigmments including cost and conveyace of all materials to site and all labour etc Complete. |
| 16 | Cost and Supply of IWC |
| 17 | Cost and Supply of EWC |
| 18 | Solid PVC Door Shutters using 19 Gauge 19mm MSsquare tubes for styles and outer frames. 15mm MSsquare tubes for top, lock and bottom rails. The steeltubes shall be covered with 5mm thick solid PVC Sheets.Shutter using 5mm thick solid PVC Sheets for panellingshall rigidly fixed in position including necessary furnitureand fittings. The over all size of styles shall be 50mm x30mm. The over all size of top rail, lock rail and bottomrail shall be 75mm x 30mm. The over all size of framesshall be 50mm x 45mm with suitable rabate for housingthe shutter |
| 19 | Cost and Supply of RCC Rings (min 25mmtk) with Cover slab 50mm tk |
| 20 | Cost and Supply of RCC Jolly 2 nos |
| 21 | Supply and delivery and fixing of HDPE 2000 lit tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing the GI pipes and specials for pipe connectionworks including cutting, threading and fixingcharges etc., |
| 22 | Provision for Name Board |
| 23 | Provision for photo charges |
| 24 | Provision for Borewell |
| 25 | Drilling of borewell anywhere in Tamilnadu including transportation from one place to another place within Tamilnadu in alluvial soil or sedimentary strata of clay and sand or sand, stone, shale, pebbles, boulders etc.,by first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia by direct or reverse rotatry mud and circulation method using Contractor’s rig, fuel, labour, drilling, betonite mud and water required for drilling at the site shown by the TWAD Officers including construction of mud pit (only Calyx drills are to be used). |
| 26 | Reaming from 150 mm dia pilot bore to 300 mm dia bore as directed by the TWAD Board Officers upto 60 m Depth ending from ground level |
| 27 | Labour Charges for inserting 150mm dia PVC casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC couplers with cement paste etc. complete |
| 28 | Charges for developing the borewell with air compressor of 300 CFM capacity (Minimum 8 Hours) including transportation labour and One hour 1303.93fuel charges for compressor as directed by TWAD Board Officers and conducting yield test by ‘V’ notch method. |
| 29 | Supply and delivery of 150mm OD PVC plain casing (CS) pipe |
| 30 | Supply and delivery of 150mm PVC end cap |
| 31 | Supply and delivery of submersible pumpset |
| 32 | Supply and delivery of 1.0 HP Panel Board |
| 33 | Supply and delivery of 2.5 Sqmm submersible cable |
| 34 | Supply and delivery of UPVC - Column pipe 40mm |
| 35 | Supply and delivery of 50mm GI flange set |
| 36 | Supply and delivery of 40mm GI coupling |
| 37 | Supply and delivery of 40mm MS Clamp set |
| 38 | Bore CoverBore cap using M.S. Flat of size 1 cm x 3 mm and M.S. sheet on top with bolting arrangements for securing the cap in position (Bore caps with M.S. Couplings need not be made) 6\\" Casing Pipes |
| 39 | Labour charges for the erection of submersiblepumpset inborewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the requireddepth valves erection clamps, pressuregauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter,three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. up to 5.0 HP |
| 40 | GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender