Tender For special Repair To Bldg No P-45 (Or Md Accn) At Narayan Enclave Of 667 Army Avn Sqn And Bldg No P-8 Incl Foothpath,Wall Gate, Etc In Avn Base Under Ge Missamari
Tender Value
1.10 Crore
Estimated cost
Bid Submission
11 Aug 2026
9 days left
EMD
1.85 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No P-45 (Or Md Accn) At Narayan Enclave Of 667 Army Avn Sqn And Bldg No P-8 Incl Foothpath,Wall Gate, Etc In Avn Base Under Ge Missamari
BOQ
| Sl. No. | Item Description |
| 1 | Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) complete all as specified and as directed. |
| 2 | Taking down Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) complete all as specified and as directed. |
| 3 | S & F Pressed steel frames size (125 x 60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed. |
| 4 | S &F Pressed steel frames size (105 x 60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed. |
| 5 | M&L PCC (1:3:6) type C1 using 20mm graded stone aggregate for fixing of hold fast and making good all as specified and as directed. |
| 6 | S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides. complete all as specified and as directed. Make : Century Ply, Green Ply, Archid Ply or equivalent as approved by GE. |
| 7 | S & F 35 mm thick factory made Second class hard wood kiln seasoned and chemically pressure treated Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc.complete all as specified and as directed. |
| 8 | S&F Factory Made Solid PVC Door Frame of size( 50 x 47 mm) made out of 5.0 mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed. |
| 9 | Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. .frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification complete all as specified and as directed. |
| 10 | S&F three track powder coated anodised aluminium sliding window having two glass shutter and one gauge shutter top and side frame made up 123.45 mm /44 mm 1.5 mm, bottom 128mm/39.15/1.63mm thick aluminium section & shutter made up 69mm/25.40mm/1.63mm and 50.80 mm / 25.40 mm/1.3 mm thick without sash bar alum section including all necessary joining cleats,hold fast ,rubber gasket anodised snap beading,anodised alumn fittings,suitable alumn handle and locking arrangment etc as directed by engr in charge. making good, all other connected fittings (Note: The unit rate quoted by contractorexclude cost of glass and gauge includes) complete all as specified and directed. |
| 11 | S&F powder coated anodised aluminium fixed ventilaters having half fixed with frosted glass 4 mm thick and half 100 mm wide glass 4 mm thick louvers frame made up 62 mm /29.5 mm 1.5 mm thick aluminium section including all necessary joining cleats,hold fast ,rubber gasket anodised snap beading,anodised alumn fittings,suitable alumn handle and locking arrangment etc as directed by engr in charge.(Note: The unit rate quoted by contractor include cost of glass and includes making good, all other connected fittings complete all as specified and as directed. |
| 12 | S&F powder coated anodised aluminium frame for doors, windows, ventiletors with one or more rebates including joining cleat for fixing etc complete all as specified in cl power coating above aluminium section.(minimum thickness of powder coating 50 micron complete all as specified and as directed. |
| 13 | S&F powder coated anodised window/ventiletor shutters, side hung type without sash bars aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips,ruber neoprene packing,anodised aluminium snap beading screws,anodised aluminium fittings such as peg stays 150 mm long(1 no),hinges type-B-21 100 mm long( 2 no) suitable handle 1 no complete all as specified incl power coating of any colour (thick ness of powder coating not less than 50 micron).complete all as specified and as directed. |
| 14 | S & F 4 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sq. M in each pane complete all as specified and as directed. |
| 15 | S & F 4 mm thick frosted glass, ordinary quality and glazing with wooden beads in quares not exceeding 0.5 Sq. M in each pane complete all as specified and as directed. |
| 16 | S&F Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 17 | S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or revited, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290. Gde-E-165 Including Taking down/Dismantlinig wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 18 | S&F in repairs Harrison rails, mild steel, chromium plated fixed alongwith 2 Nos. of brackets, stops, rollers etc, complete all as specified and as directed. |
| 19 | M&L 18/19 mm thick pre-laminated WPC board exterior grade prelaminated both sides with decoratative choice lamination fixed as in Kitchen cabinet cup boards and similar work with incl piano hinges , mgnetic catcher one piece each shutter and 100 mm SS handle incl wooden framework.complete all as specified and as directed. |
| 20 | S&F mild steel flat iron of size (50 x 3 mm) as in hold fast complete all as specified and as directed. |
| 21 | S & F 100 mm long extruded aluminium alloy with galvanised mild steel Butt hinges and fixed type B-21. complete all as specified and as directed. |
| 22 | S & F 100 mm long medium weight, cold rolled mild steel Butt hinges and fixed.complete all as specified and as directed. |
| 23 | S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.. |
| 24 | S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 25 | S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.complete all as specified and as directed. |
| 26 | S&F Glazed ceramic coloured tiles in vertical surfaces (450 x 300 x 7 mm) thick set and jointed in neat cement slurry & painted in white or colour cement to match incl sreed bed 10 mm thick in CM (1:4) including dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises.complete all as specified and as directed. |
| 27 | M&L Non - skid Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar (1:6), 15 mm thick for laying floor finishes including dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises. complete all as specified and as directed. |
| 28 | M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar (1:6), 15 mm thick for laying floor finishes including dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises. complete all as specified and as directed. |
| 29 | Description all as per item No 28 but on vertical surface of wall as in dado/skitting including 10 mm thick rendering in CM (1:4) including dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises. complete all as specified and as directed. |
| 30 | M&L Heavy duty Coloured Ceramic Tiles (300 x 300 x 15 mm) thick, in Floors, set and jointed in Neat Cement Slurry and pointed in White Cement mixed with Pigment to match the colour of tiles over and including 15 mm thick screed bed or bedding layer in CM (1:4) including dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises., complete all as specified and as directed. |
| 31 | Description all as per item No 30 but on vertical surface of wall as in dado/skitting including 10 mm thick rendering in CM (1:4) including dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises. complete all as specified and as directed. |
| 32 | M & L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like 15mm thick in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,including rubbing, rounding of edge stone slab and polishing including dismantling old stone slab complete all as specified and as directed. |
| 33 | Demolition of RCC of any description complete all as specified and as directed. |
| 34 | M&L for Reinforced cement concrete nominal mix M15 B0 (1:2:4) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like |
| 35 | M & L for TMT reinforcement 10 mm dia and over cut to length bent to shape including cranking, hooking etc binding with mild steel wire not less than 0.90 mm dia (annealed) complete all as specified and as directed. |
| 36 | Demolition of un- reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level) complete all as specified and as directed. |
| 37 | M&L for 75 mm thick cement concrete as in plinth protection/ path etc type C-2 (1:3:6) (using 40mm graded aggregate) finishing concrete surface even and smooth with using extra cement complete all as specified and as directed. |
| 38 | M&L for 100mm thick PCC (1:2:4) Type B-1 using 20mm graded stone aggregate in pavement/hard-standing laid in alternative panels, surface finished even and fair including necessary form work, complete all as specified and as directed. |
| 39 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand incl demolition of old paver block, complete all as specified and as directed. |
| 40 | Removing complete existing treatment incl pcc pedding of roof surfaces by picking, sweeping clean and washing down with water to remove dust etc. complete all as specified and as directed. |
| 41 | M&L for brushing neat cement slurry with 03 Kg of cement per Sqm complete all as specified and as directed. |
| 42 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) (Internal water proof compound measured seperately) complete all as specified and as directed. |
| 43 | M&L 25 mm thick cement concrete PCC Type B0 (1:2:4) using 12.5 mm graded aggregate. complete all as specified and as directed. |
| 44 | M&L for water proofing treatment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top including taking down existing treatment complete all as specified and as directed.(i) Applying one coat of cold bituminous primer 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces. (ii) APP based polymeric membrane 3mm thick, minimum weighing 3.5 Kg/sqm, reinforced with polyester non woven fabric (weighing not less than 160 gms/Sqm) shall be applied over bituminous primer as specified above by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction and sealing the joints with application of cold bitumen.(iii) Applying two coats of aluminum paint over the APP membrance . |
| 45 | S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls including Taking down rain water pipes inculding all fittings any size and pattern. complete all as specified and as directed. |
| 46 | S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes double socketed in any length with rubber ring joints fixed in walls including Taking down rain water pipes inculding all fittings any size and pattern. complete all as specified and as directed. |
| 47 | S & F 110 mm bore PVC (SWR) bends of any radius. complete all as specified and as directed. |
| 48 | S & F 75 mm bore PVC (SWR) bends of any radius. complete all as specified and as directed. |
| 49 | S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and as directed. |
| 50 | S & F 110 mm bore PVC (SWR) Vent Cowl complete all as specified and as directed. |
| 51 | Supply & fix 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed. complete all as specified and as directed. |
| 52 | S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed. |
| 53 | M&L 75 mm bore for PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and as directed. |
| 54 | Supply and laying 20 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed including taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store. |
| 55 | Supply and laying 25 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed including taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store. |
| 56 | Supply and laying 32 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed including Taking up or down 25 or 32 mm bore steel tubing and connections, including cleaning for Refixing or removal to store. |
| 57 | S&F in repairs 10 Ltrs. Capacity PVC flusing cistern low level slimline or equivalen make / model with all accessories. complete all as specified and as directed. |
| 58 | S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size (550 x 400 mm) size including cutting for and pinning ends of brackets or erecting stand and waste pipe as requred complete all as specified an as directed |
| 59 | S&F in repair vitreous china, orrisa squatting pan of pattern water closet seat of size (580 mm x 440 mm) white with and incl 'P' or 'S' trap and provision of lime concrete bedding in repairs |
| 60 | Supply & Fix in repairs Vitreous China (Pedestal pattern) Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. pipe) complete in all respect all as specified and as directed. “long pan”, size 580 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe) |
| 61 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in positioncomplete all as specified and as directed. |
| 62 | S&F in repair 15 mm bore fancy type chromium plated Two way bib tap with crutch or buttrfly handle screwed down for iron pipe. complete all as specified and as directed. |
| 63 | PVC connection 15 mm bore 450 mm long complete all as specified and as directed. |
| 64 | S & F in repairs 15mm bore angular/ concealed stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. |
| 65 | S & F in repairs 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed. complete all as specified and as directed. |
| 66 | S&F in repair wall mixer , 3 in -1 system with provision for both telephone shower and over head shower, chromium plated, fancy type, 15 mm bore complete all as specified and as directed . |
| 67 | S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. complete all as specified and as directed. |
| 68 | S&F in repairsTowel Rail 600 mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. complete all as specified and as directed.(Minimum weight 190 gms) |
| 69 | S & F in repair CP Soap dish of size (160 x 160 x 90 mm), any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed |
| 70 | S&F (600 mm x 450 mm) bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers incl taking down old one. complete all as specified and as directed. |
| 71 | Preparation of new or previously treated wood surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of pink primer over applying two coat of synthetic enamel paint. complete all as specified and as directed. |
| 72 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed. |
| 73 | Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including removal to rubbish complete all as specified and as directed. |
| 74 | M&L for Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar (1:6) complete all as specified and as directed. |
| 75 | M&L for half brick work burnt modular bricks built in cement mortar 1:4 straight or curved on plan exceeding 6mtr mean radius complete all as specified and as directed. |
| 76 | M&L for 15mm thick plaster in two layers on fair faces of brick work or concrete surface in cm (1:4) with wpc @ 2% by weight of cement face of conc work to wall surface and the surface is finished even and smooth without using extra cement.WPC paid separetely complete all as specified and as directed. |
| 77 | M&L rendering 15 mm thick on other than fair faces of brick or concrete Surfaces in cement mortar (1:6) finished even and smooth. complete all as specified and as directed. |
| 78 | M&L rendering 5mm thick of cement plaster (1:3) on concrete surfaces of ceiling finished even and smooth (without using extra cement.). complete all as specified and as directed. |
| 79 | Supply only Integral water proofing compound complete all as specified and as directed. |
| 80 | Material & Labour for preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm over new surface over 1 mm thick wall care putty. complete all as specified and as directed. |
| 81 | M & L for Complete removal of old surface for preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm over new surface over 1 mm thick wall care putty. complete all as specified and as directed. |
| 82 | M&L for preparation of new plastered surfaces of walls and applying two coats of acrylic distemper including one coat of Primer over & incl 1 mm thick wall care putty complete all as specified and as directed . |
| 83 | M&L for complete removal of old surfaces of walls and applying two coats of acrylic distemper including one coat of Primer over & incl 1 mm thick wall care putty complete all as specified and as directed. |
| 84 | Preparing new surfaces of ceilings by brooming down or by steel wire brushing and applying three coats of white wash. complete all as specified and as directed. |
| 85 | M&L for preparation of old decorated plastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed. |
| 86 | S&F 500 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position all as specified including 20mm bore ball brass valves, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed Including dismantling PVC/RCC water tanks and removing to store n exc 500 complete all as specified and as directed. |
| 87 | Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 88 | Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:3) and even and smooth without using extra cement including mixing of water proofing compound wherever required for floors and sides of wall in sunken floors complete all as specified and as directed.NOTE: Water proofing compound will be measured separately |
| 89 | M&L applying one coat of FOSROC Nitoproof 600 PF Waterproofing component to sides and bottom of floors to sunken floors. complete all as specified and as directed. |
| 90 | M & L for plain cement concrete Type E2 (1:5:10) (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete. complete all as specified and as directed. |
| 91 | M & L for 25 mm thick plain cement concrete Type B1 (1:2:4) (using 20 mm graded granite stone aggregate) in floor sub base and mass concrete. complete all as specified and as directed. |
| 92 | S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar of dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size (915 mm x 460 mm) bowl size (410 mm x 330 mm x 160 mm). complete all as specified and as directed. |
| 93 | Dismantling plain or corrugated steel sheeting any thickness in roof covering. complete all as specified and as directed. |
| 94 | S&F pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws as specified incl dismantling of old steel sheets of any description. complete all as specified and as directed. |
| 95 | S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in Ridge with self tapping screws as specified incl dismantling of old steel sheets of any description. complete all as specified and as directed. |
| 96 | Taking down/Dismantlinig wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 97 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161 1979 grade St.-240 complete all as specified and as directed. |
| 98 | Preparation of new or previously treated steel surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of Red Oxide, zinc chorme and applying two coat of synthetic enamel paint. complete all as specified and as directed. |
| 99 | Excavation in post holes or simillar hole each n exc. 0.5 cum, getting out, returning , filling in and ramming earth or broken rubble mixed with earth around in layer not exc 25 cm in soft/loose soil complete all as specified and as directed. |
| 100 | M&L PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate as in foundation filling / mass concrete,complete all as specified and as directed. |
| 101 | S&F 1st class hardwood, Plain, solid, straight chowkats and frames of door, window, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints cpmplete all as specified and as directed |
| 102 | S&F 35mm thick 1st class hard wood Glazed and skeleton shutters as in window, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specfied & as directed by Engr-in-Charge |
| 103 | S&F 35 mm 1st class hardwood Plain, framed, panelled shutters as in doors(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats complete all as specfied & as directed |
| 104 | M&L Cement Concrete (1:3:6) (20 mm graded crushed stone aggregate) as in Hold fast Block including necessary form-work etc complete all as specified and as directed.. |
| 105 | M&L for providing and fixing 5mm thick clear toughened glass panes in wooden window frames, cut to required size and shape, including supply of glass, edge polishing, drilling holes if required, fixing with approved wooden beads and CP brass screws, including putty or silicon sealant as required, making good disturbed surfaces, cleaning and finishing, complete all as specified and as directed. |
| 106 | S & F 150 mm long Extruded Brass handles, fabricated type polished complete all as specified & directed |
| 107 | S & F 150 mm long brass barrel tower bolts of extruded section complete all as specified & as directed |
| 108 | S & F 300 mm long brass sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and as directed. |
| 109 | Taking down/Dismantlinig wrought iron or mild steel work of any description complete all as specified and as directed. |
| 110 | S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings,frame work of watertanks and similar work conforming to Fe -290 Gde E-165 complete all as specified and directed. |
| 111 | Dismantling plain or corrugated asbestos sheeting any thickness in roof covering complete all as specified and as directed. |
| 112 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screwscomplete all as specified and as directed. |
| 113 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridge,fixed with self tapping screws complete all as specified and as directed. |
| 114 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets. complete all as specified and as directed. |
| 115 | S&F for 12mm Thick Seamless calcium silicate ceiling made out of (1800 x 1200 mm) size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish complete all as specified and as directed. |
| 116 | M&L Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed. |
| 117 | Dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified and as directed. |
| 118 | S&F Glazed ceramic coloured tiles in vertical surfaces (450x 350x 7 mm) thick set and jointed in neat cement slurry & painted in white or colour cement to match incl backing coat 10 mm thick in CM (1:4) complete all as specified & as directed. |
| 119 | S&F Double Charge Vitrified tiles of dark shade 10 mm thick (square/ rectangular) polished, area of each tiles lot exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar (1:6), 15 mm thick for laying floor finishes complete all as specified & directed. |
| 120 | Description all as per item No 119 but on vertical surface of wall as in dado/skitting including 10 mm thick rendering in CM (1:4) |
| 121 | Demolition of stone slabs tiles of any description or thickness in floors aprons laid bedded and pointed in any morter etc complete all as specified and directed. |
| 122 | S&F heavy duty vitrified / ceramic floor tiles (600mm x 600mm x 15mm) thick, of approved make, colour and shade, laid on floors over 20mm thick cement mortar bed in CM (1:4) including screeding, bedding, jointing with grey/white cement slurry mixed with pigment to match the shade of tiles, cutting tiles as required, finishing joints neat and flush, curing, cleaning and making good disturbed surfaces, complete all as specified and as directed |
| 123 | S&F Dura Stone tiles (300mm x 300mm x 15mm) thick, heavy duty type, of approved make, colour and shade, laid on floors over 20mm thick cement mortar bed in CM (1:4) including screeding and bedding, jointing with grey cement slurry mixed with pigment to match the shade of tiles, cutting tiles where required, finishing joints neat and flush, curing, cleaning and making good disturbed surfaces, complete all as specified and as directed. |
| 124 | Description all as per item No 123 but on vertical surface of wall as in dado/skitting including 10 mm thick rendering in CM (1:4) complete all as specified and as directed. |
| 125 | Demolition of cement concrete (unreinforced) of any description and in any position complete all as specified and directed |
| 126 | M&L for PCC type B-2, (1:2:4) (using 40 mm nominal size crushed and graded stone aggregate) in foundations, filling and mass concrete for post holes, complete in all respect as specified and directed. |
| 127 | M & L Hardcore of guage exc 63 mm but n exc 150mm thick deposited spread and levelled with broken stone, watered and rolled/rammed to a true surface, complete all as specified and as directed. |
| 128 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 129 | Material and labour 100 mm thick cement concrete (1:3:6) type B2 using 40 mm graded stone aggregate as in floor,plinth , finishing cement concrete surface complete laid in alternate bays, making impressions of expended metal while the concrete is green complete all as specified and as directed. by Engr-in-charge.. |
| 130 | Dismantling timber scantlings 40 sq. cm and over in section, in any position (unframed) complete all as specified and as directed. |
| 131 | Dismantling timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified & directed |
| 132 | Dismantling boarding, any description, fixed in any position with nails complete all as specified & as directed |
| 133 | S&F Second class hard-wood in rafter,purlin,post scantlings wrought framed & fixed etc complete all as specified & as directed |
| 134 | S&F 1st class hard-wood moulded Handrails of size (100x75mm) rounded or shaped with splayed faces in straight lengths complete all as specified & as directed |
| 135 | M&L for providing and fixing square wrought timber balusters of approved 1st class hardwood (50x50mm) section, properly planed and finished smooth, with ends housed (square or splayed) into handrails and treads or strings as specified, including forming tenons, mortices, housing joints, cutting, shaping and fitting in position, complete with necessary screws, wooden dowels, adhesive and all fixing arrangements, complete all as specified and as directed. |
| 136 | M&L for providing and fixing wrought timber newel posts of approved 1st class hardwood, having sectional area not exceeding (100mm x 100mm), square, rounded, chamfered or stop-chamfered edges as specified, including forming mortices, housings and tenons for fixing of strings, handrails and balusters, properly shaped, planed, sanded and finished smooth, complete with necessary screws, wooden dowels, adhesive and all fixing arrangements, complete all as specified and as directed |
| 137 | S&F 1st class hardwood, 40 mm thick wrought treads with rounded nosings, and 25 mm thick wrought risers tongued on both edges, properly housed into strings, glued, wedged and blocked, including forming rebates, tenons, mortices and housing joints as required, planing, sand papering and finishing smooth, complete with necessary screws, wooden wedges, blocks and adhesive, complete all as specified and as directed. |
| 138 | Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including removal to rubbish complete all as specified and as directed. |
| 139 | Labour only Brick Work using old bricks obtained from demolition, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar (1:6), complete all as specified and as directed. |
| 140 | M&L for Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar (1:4), complete all as specified and as directed. |
| 141 | M&L for half brick work burnt modular bricks built in cement mortar (1:4) straight or curved on plan exceeding 6mtr mean radius and all as directed. |
| 142 | M&L for PCC (1:2:4) type B1 (using 20mm graded agg) as in cooping /benchingcomplete all as specified and directed. |
| 143 | M&L PCC in surface channels,benching in sewers,drains etc type B1 (1:2:4) using 20 mm graded stone aggregate |
| 144 | M & L for redndering in cement mortar (1:4) 15 mm thick on concrete /brick masonry wall surfaces, complete all as specified and as directed. (Note WPC paid separetely) |
| 145 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and as directed. |
| 146 | M&L for rendering 20 mm thick in cement mortar (1:4) on brick or concrete surfaces finished even & smooth to receive grooves, complete all as specified and as directed (WPC for finishing layer will be measured and paid seperately ). |
| 147 | M&L for forming grooved plaster (false joint lines) on newly applied plastered surface, grooves of approved pattern, not exceeding 10mm wide and 5mm deep, made with approved tools while plaster is green, including marking lines true to level and plumb, removing loose mortar, finishing edges sharp and clean, complete all as specified and as directed. |
| 148 | M&L rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth(without using extra cement.).complete all as specified and as directed. |
| 149 | M&L rendering 5mm thick of cement plaster (1:3) on concrete surfaces of ceiling finished even and smooth(without using extra cement.). |
| 150 | Supply only Integral water proofing compound complete all as specified and as directed. |
| 151 | M&L for Pre-cast RCC (1:2:4) type B1 using 20mm graded stone aggregate as in landing, cover slabs (Drain cover) set in CM (1:6) complete all as specified and as directed. |
| 152 | M&L for RCC M-25 grade of concrete using 20 mm graded stone aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. complete all as specified and as directed |
| 153 | M&L for RCC M-25 grade of concrete using (20 mm graded aggregate) in columns, pillars, piers, posts and struts complete all as specified and as directed. |
| 154 | M & L mild steel deformed TMT bar 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders and binding with and including mild steel wire (ammealed) not less than 0.9 mm dia complete all as specified and as directed |
| 155 | M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter in fair finish of flat surface complete all as specified and as directed |
| 156 | M & L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions in fair finish of flat surface complete in all respect as specified and as directed. |
| 157 | M & L for granite of any type 20 mm thick machine cut bedded and jointed with grey cement slurry and pointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete incl 20 mm thick screed bed (1:6) CM in floors.complete all as specified and as directed |
| 158 | S & F Framed work such as gates ,grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0, ornamental and intricate design,portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc complete all as specified and as directed |
| 159 | S & F MS Plates (plain or chequered) channels, Square cut or notched (ordinary and counter sunk) forming holes, without any attachment to Fe 410-W (Gde- E- 250) quality-A complete all as specified and as directed |
| 160 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed |
| 161 | Preparation of new or previously treated steel surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of Red Oxide, zinc chorme and applying two coat of synthetic enamel paint complete all as specified and as directed |
| 162 | Preparation of new or previously treated wood surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of pink primer over applying two coat of synthetic enamel paint complete all as specified and as directed . |
| 163 | M&L Preparing new Wood and Wood Based Surfaces of any description, over 10 Cm width or girth and applying french polish two or more coats over a coat of wood fillers complete all as specified and as directed. |
| 164 | Material & Labour for preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm over new surface over 1 mm thick wall care putty.complete all as specified and as directed |
| 165 | M&L for preparation of new plastered surfaces of walls and applying two coats of acrylic distemper including one coat of Primer over & incl 1 mm thick wall care putty complete all as specified and as directed . |
| 166 | M&L for complete removal of old surfaces of walls and applying two coats of acrylic distemper including one coat of Primer over & incl 1 mm thick wall care putty complete all as specified and directed. |
| 167 | M&L for Preparing new surfaces of ceilings and applying two coats of white wash complete all as specified and as directed. |
| 168 | M&L for preparation of old decorated plastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed. |
| 169 | Excavating in trenches, n. exc 1.5 m wide and n. exc 1.5 m in depth; for foundation, etc. and getting out in soft/loose soil complete in all respect as specified and directed. |
| 170 | Removing excavated material n. exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete in all respect as specified and as directed. |
| 171 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete in all respect as specified and as directed. |
| 172 | Taking down rain water pipes inculding all fittings any size and pattern complete all as specified and as directed. |
| 173 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 75 mm bore of pipe etc complete all as specified and as directed. |
| 174 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 110 mm bore of pipe etc complete all as specified and as directed. |
| 175 | Taking down carefully existing unserviceable copper/ aluminium point wiring (light,fan , call bell, two way, socket or power point etc) complete with fittings/fixures such as switches sockets, ceiling rose, fan regulators, bell push,call bell,bracket light fittings and making good to the disturbed surface complete all as specified and as directed by Engr-in-Charge. |
| 176 | Taking down the existing unservicable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed by Engr-in- Charge. |
| 177 | Taking down carefully unsv aluminium submain wiring of any type /location including conduit /casing and earth wire and making good the distributed surface of walls /ceiling matching with existing finishes complete all as specified and as directed by Engr-in-Charge. |
| 178 | Taking out unsv UG Cable any cross sectional area and connection of any description of any description laying in trenches or fixing with wall or poles complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 179 | Taking out unsv UG Cable any cross sectional area and connection of any description of any description laying in trenches or fixing with wall or poles complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender