Tender For special Repair For Replacement Of Roof Sheet At T-416 And Certain Revenue Works At Masimpur Mil Stn
Tender Value
44 Lakhs
Estimated cost
Bid Submission
07 Aug 2026
6 days left
EMD
88000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cachar → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair For Replacement Of Roof Sheet At T-416 And Certain Revenue Works At Masimpur Mil Stn
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 27-Jul-2026 | BOQ revised | BOQ | 07-Aug-2026 |
| 2 | 27-Jul-2026 | Date Rerevised | Date | 07-Aug-2026 |
| 3 | 27-Jul-2026 | Schedule of Credit | Other | 07-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | B & R Division Items |
| 2 | Demolition of reed lathing, single or double including battens and plaster or chiken wire lathing. |
| 3 | Dismantling mild steel work or wrought iron of any description and in any position complete all as specified and as directed. |
| 4 | Dismantling plain or corrugated steel sheeting, any gauge or any thickness as in roof covering, wall cladding, etc.including all necessary staging / scaffolding, etc. as required complete all as specified and as directed. |
| 5 | Dismantling of timber scantling 40 Sqcm and over in section, in any position in unframed work complete all as specified |
| 6 | Dismantling of wooden boarding , any description, fixed in any position with nails complete all as specified and as directed. |
| 7 | Surface dressing not exceeding 15 cm deep and getting out in soft/loose soil all as specified and directed. |
| 8 | Excavation in trenches not exceeding 1.50 m wide and n.exc 1.5 m in depth for foundation of poles, cable etc, not exc 10 sqm on plan and getting out in soft/loose soil including taking out brick protection etc complete all as specified and directed. |
| 9 | Excavation in trenches not exceeding 1.50 m for foundation, etc or shafts, wells, cesspits, manholes etc, not exc 10 sqm on plan and getting out hard/dense soil complete all as specified and directed. |
| 10 | Returning, filling in trenches including spreading, leveling watering and ramming in layers not exceeding 25cm complete all as specified and directed. |
| 11 | Removing excavated material exc. 250m but n exc. 500m and depositing where directed at a level n exc. 1.5m above the straight point in soil complete all as specified and directed. |
| 12 | M & L hardcore of guage n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface |
| 13 | M & L for PCC (1:4:8),Type D2 using 40 mm graded stone aggregate as in foundations, sub-base,filling and mass concrete complete all as specified & as directed. |
| 14 | M&L for 100mm thick PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in sub base,sub floor, paving where it is directed. |
| 15 | M & L for 50 mm thick cement concrete 1:3:6 type C-1, using 20 mm graded stone aggregate as in plinth protection laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed . |
| 16 | M&L for precast reinforced cement concrete (1:2:4) type B1, 20mm graded stone aggregate as in cover slab, landing, etc complete all as specified and as directed. |
| 17 | Use and waste Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work, vertical or to batter rough finished flat surfaces of concrete complete all as specified and as directed. |
| 18 | Use and waste of Form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete all as specified and directed. |
| 19 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed |
| 20 | M & L for Reinforced Cement Concrete M-25 (Design Mix) using 20 mm graded aggregate as in foundation including rafts, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and directed. |
| 21 | M & L for Reinforced Cement Concrete M-25 (Design Mix) using 20 mm graded aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 22 | M & L for Reinforced Cement Concrete M-25 (design mix) using 20 mm graded aggregate as in beams, cantilever, lintels over 1.5m complete all as specified and directed. |
| 23 | M & L for Reinforced Cement Concrete M-25 (Design Mix) using 20mm aggregate as in slab supported on walls , beams, and column in floors, roof, landing, balconies, canopies, deck slab and in shelves and like etc comlpete all as specified and directed. |
| 24 | M & L for Mild steel TMT bars 10mm dia and over , cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 25 | M & L for mild steel TMT bars 5mm dia and over up to and including 10mm dia as stirrups, spacers etc. , cut to length bend to shape required including cranking bending spirally for hooking ends and binding with and including mild steel wire n.less than 0.90mm dia complete all as specified and directed. |
| 26 | M&L for Brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6m mean radius, built in, exc. 10cm in width and setting in mortar1:6 complete bricks straight or curved complete all as specified. |
| 27 | M&L for Brickwork with sub class ‘B’ bricks old size, straight or curved on plan to any radius in half brick thick walls, built ind setting in mortar1:6 complete bricks straight or curved complete all as specified. |
| 28 | M&L for Preparing Roof surface by picking, sweeping clean and washing down with water to remove dust, etc and applying roof treatment with the following specification:- (a) Applying cement slurry over concrete surfaces @ 3 kg/sqm.(b) M&L 25 mm thick cement concrete PCC Type B0 1:2:4 using 12.5 mm graded aggregate on roof slab (c) Rendring 15mm thick in cement mortar (1:4) mixed with water proffing compound as per manufactures instruction on cleaned concrete surfaces of roof and finishing the surfaces fair and even including curing the plastered surfaces for 7 days by ponding of water over the roof, (leveling course).(d) Applying evenly one coat of cold bituminous primer conforming to [email protected] liter per square metre on the cleaned plastered surfaces (e) Applying evenly one coat of blown hot bitumen of grade 85/25@ 1.20 Kg per square metre on primed surfaces.(f) Applying a layer of APP based polymeric membrane, 3mm thick (minimum)Weighing 3.50 Kg per square metre reinforces) with polyster non woven fabric wighing not less than 160 gms per square metre by torch application. The overlap shall be not less than 100mm on transverese direction and 75 mm on longitudinal direction and sealing overlaps.(g) Applying evenly one coat of Aluminium paint @ 0.10 litre per square metre over the APP based polymeric membrane at 5th floor complete all as specified and directed |
| 29 | M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surface of ceiling finished even and smooth without using extra cement . |
| 30 | M & L for 10 mm thick rendering in cement mortar (1:6) on other side of lathing surface finished even and smooth all as specified. |
| 31 | M & L for 15 mm thick rendering in Cement Mortar 1:4 on brick / concrete surfaces, , finishing the top surface even and fair without using extra cement complete all as specified and as directed. |
| 32 | M&L for 15 mm thick rendering in cement mortar 1:4 on other than fair face of brick or surface finished even and smooth without using extra cement complete all as specified and as directed. |
| 33 | M & L for 15mm thick rendering in cement mortar (1:4) on other than face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified. |
| 34 | M & L for 10 mm thick rendering in cement mortar (1:6) on other than face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified. |
| 35 | M & L for 15 mm thick rendering cement plaster in CM (1:4) on one side of lathing with two layer each of 10+5 mm thick & water proofing compound mixed with second layer 5mm thick @ 3% of wt of cement, finished even and smooth all as specified.( Note -WPC shall be measured and paid separetly . ) |
| 36 | S & F for GI wire netting 0.71 mm dia and 12 mm mesh lathing to wood or metal studding joints etc in walls ceiling stanchion, beams etc included all laps cutting and wastes complete all as specified and as directed. |
| 37 | Supply only Integral water proofing compound complete all as specified. |
| 38 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured for laying floor finishes incl over 15mm thick screed bed cement mortar 1:6 for bedding of tile complete all as specified and as directed. |
| 39 | M&L for Glazed ceramic coloured tiles in vertical surfaces 450x 300x 7 mm thick set and jointed in neat cement slurry & painted in white or colour cement to match incl over 10mm thick plastering cement mortar 1:4 for bedding of tile complete all as specified and directed. |
| 40 | Supply and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed . |
| 41 | S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 42 | S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 43 | S & F mild steel sheeting 0.63mm thick used in ridges, hips, valley gutters, drip and straight flashing with grade of zinc coating 275 fixed with self tapping screw \\"L\\" type or \\"J\\" type cranked hook bolts, nuts and washers complete all as specified and as directed |
| 44 | M & L mild steel angle iron posts & struts in fencing including cutting top to shape, drilling holes, notching for wire including all necessary drilling bolts or rivetting & similar works conforming to Fe-290 grade E-165 for securing chain link fencing, etc. complete all as specified and as directed |
| 45 | S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 46 | S & F plates (plain or chequered) channels, square cut or notched (ordinay and counter sunk) forming holes, without any attachment of Fe 410W (Gde-E -250) Quality 'B' complete all as specified and directed by Engr-in-Charge. |
| 47 | S & F Steel work in trusses, purlins, posts and the like using tubular/ square hollow sections including special shaped washer etc. complete using ERW or induction butt welded tubes/SHS conforming to IS.1161 - 2014 / IS.4923 - 1997 grade St.-210 complete all as specified and directed. |
| 48 | S & F Second class hardwood 20mm thick boarding, planed one side, fixed with nails in any position (except flooring And skirting) with butt joint complete all as specified and directed. |
| 49 | M & L for second class hardwood in scantlings timber framed and fixed for wrought in section complete all as specified and directed. |
| 50 | M & L for second class hardwood in scantling timber framed and fixed for clean sawn in section at position complete all as specified and directed. |
| 51 | S & F Solid PVC door frame of size 50mm x 47mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010). |
| 52 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified. Make: Rajshri or equivalent as approved. |
| 53 | S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters with frames of doors, windows (2-gauzed and 1-glazed) & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including thecost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 54 | S & F Powder coating anodised aluminium frame for doors, windows, ventilatiors (Minimum thickness of powder coating 50 micron) with one or more rebtes including joining cleat for fixing etc. complete all as specified. |
| 55 | S & F 4.00 mm thick sheet glass ordinary quality and glazing with wooden beads in square n.exc 0.5 sqm in each pane complete all as specified. |
| 56 | S & F 3.00 mm thick sheet glass ordinary quality and glazing with oil putting square n.exc 0.5 sqm in each pane complete all as specified. |
| 57 | S & F 100 mm long aluminum anodised barrel tower bolts of extruded section complete all as directed and specified. |
| 58 | S & F 150 mm extruded aluminum alloy handles, fabricated type, anodised complete all as directed and specified. |
| 59 | S & F 100mm long extruded aluminium alloy with galvanised mild steel Butt hinges and fixed type B-21 complete all as directed and specified. |
| 60 | S & F for vitreous china wash and basin, white, flat back, size 550mm X 400mm fixed on MS bracket including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. |
| 61 | S & F Vitreous china wash down water closet pan ( pedestal pattern ) , white (excluding fixing bolts, flushing cistern and flush pipe) fixed complete all as specified and as directed. |
| 62 | S & F of Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 63 | S & F vitreous China squatting pan white orissa pattern size 580mm X 440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron P trap including lime concrete bedding and making good the disturbed portion to match with the existing finishes of floor all as specified and directed. |
| 64 | M & L for Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified. |
| 65 | S & F PVC valveless, syphonic action type,low level PVC flushing cistren 10 ltr capacity white colour with flush pipe &all fitting and flush pipe complete all as specified. |
| 66 | S & F PVC connections 15mm dia size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 67 | S & F 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 68 | S & F 15mm bore bib tap, 2 in 1 tap, cast copper alloy chromium plated fancy type screwed down high pressure, with crutch or butterfly handle for 15 mm bore pipe or for unions complete all specified and directed. |
| 69 | S & F 15 mm bore, Pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified. |
| 70 | S & F 15mm bore stop valve/angle valve, cast copper alloy chromium plated fancy type screwed down high pressure, with crutch or butterfly handle for 15 mm bore pipe or for unions complete all specified and directed. |
| 71 | S & F in repairs grating round 100 mm size of PTMT (min weight 25 grms)complete all as specified and directed. |
| 72 | S & F in repair Towel rail Tubular , 20mm dia aluminum anodised , 600mm long D type with aluminum anodised brackets on both sides and fixed with steel screws and wooden/rawl plugs complete all as specified. |
| 73 | S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 74 | S & F 600mm X 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fxed to wooden plugs with chromium plated brass screw and cup washer etc complete all as specified and as directed. |
| 75 | M & L for plain cement concrete (1:3:6) type C-2 with using 40mm graded crushed stone aggregate use to concrete bed for drain pipe 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested all complete all as specified and directed. |
| 76 | M & L for 150mm dia (internal) salt glazed stone ware drain pipes (Grade A) ISI Marked as in sewage lines laid in trenches and jointed with suitable material and testing of laid pipe complete all as specified and directed. |
| 77 | S & F of CPVC pipes SDR 11 & Plain CPVC SDR 11 of dia 16mm bore with suitable fittings on walls/ceiling or laying in floors complete all as specified. |
| 78 | S & F of CPVC pipes SDR 11 & Plain CPVC SDR 11 of dia 20 mm with suitable fittings on walls/ceiling or laying in floors complete all as specified. |
| 79 | S & F of 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls as specified. |
| 80 | S & F for 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls as specified. |
| 81 | S & F of 110mm bore PVC Bends (any Radius) with access door complete all as specified and directed |
| 82 | S & F of 75 mm bore PVC Bends (any Radius) with access door complete all as specified and directed |
| 83 | S & F of 110mm bore PVC (SWR) vent cowl complete all as specified and directed |
| 84 | S & F 110mm bore PVC(SWR) branch piece,single (single Y) equal or unequal with access door complete all as specified and directed |
| 85 | S & F 75mm bore PVC(SWR) branch piece,single (single Y) equal or unequal with access door complete all as specified and directed |
| 86 | Supplying, hoisting, fixing and connecting up 1000 litre rotational moulded polythylene water storage tanks double layer (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I including connecting the overflow drain out, inlet and outlet pipes, tank nipple, elbow, bend, unions, sockets, etc. complete all as specified and as directed |
| 87 | S & F in repairs 25mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm- 690 gms) complete all as specified and directed. |
| 88 | M&L Preperation of newly plastered surfaces of wall and apply three coat of white wash complete all as specified and as directed. |
| 89 | M&L for Preperation of new plastered surface of ceiling and applying three coat of white wash complete all as specified and as directed. |
| 90 | M & L for complete removal of existing treatment and applying two coat of oil bound distemper (white or tinted) over a coat of primer on wall all as specified and directed. |
| 91 | M & L for prepration of new or previously untreated surface and applying two coat of oil bound distemper over a coat of primer on wall complete all as specified and directed. |
| 92 | M & L for preparation of old decorated plastered surface or unplastered wall surfaces including brooming down or steel wire brushing , scrapping down smoke, soot , moulds , moss and efflorescent salts and trading oil and greasy spots etc and applying two coats of Oil bound distemper using roller over a coat of primer complete all as specified. |
| 93 | M & L for preparation of new plastered surface applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surface complete all as specified and as directed. |
| 94 | M & L for complete removal of existing treatment wall surface and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surface complete all as specified and as directed. |
| 95 | M & L for preparation of new steel surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 96 | M & L for preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coat of Synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 97 | M & L for preparation of old painted wooden surfaces of any description, not otherwise described exceeding 10 cm width or girth (upto 4th floor) and applying one coat of Synthetic enamel paint complete all as specified and directed. |
| 98 | M & L for surface of wood and wood base material old and new of any description and girth not otherwise described and treated with cresote oil complete all as specified and directed. |
| 99 | E & M Division items |
| 100 | M & L for point wiring with PVC insulated cable 1100 volts grade, FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, , ISI-694 marked in and including heavy duty, PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated cable 1100 volts grade, FRLSH stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One light point controlled by one switch. |
| 101 | M & L for point wiring with PVC insulated cable 1100 volts grade, FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, ISI-694 marked in and including heavy duty, PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One fan point/exhaust fan point controlled by one, one way switch 5 Amp. |
| 102 | M & L for point wiring with PVC insulated cable 1100 volts grade, FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, , ISI-694 marked in and including heavy duty, PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated cable 1100 volts grade, FRLSH stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One 3 pin 5 Amp socket outlet point controlled by one switch on independent board. |
| 103 | S & F switch piano flush type button single pole one way 5 Amps all as specified and directed. |
| 104 | S & F socket outlet 2 in 1, 3 pin 5 Amp flush type all as specified and directed. |
| 105 | S & F switch piano flush type button single pole one way 15 Amps all as specified and directed. |
| 106 | S & F Socket outlet 2 in 1, 3 pin, 5 and 15amp flush type all as specified and directed. |
| 107 | S & F ceiling rose surface bakelite with three terminals all as specified and directed |
| 108 | Supply & Fix LED betten plastic type fitting of capacity 20W, operating on 230V, 50Hz, AC Supply having luminous efficacy of not less than 125 lumens/watts, CCT 6500K, P.F>0.9, 2.5 KV surge protection, 4-feet long, housing made out of extruded alluminium with decorative end caps elegently designed complete all as specified. |
| 109 | S & F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 110 | S & F bldg security light, LED luminaire 30 watt made up of pressure die cast alluminium body with mid power LED as lighting sources and PC cover having Top opening separate driver compartment with IP66 protection and impact resistance of IK07 including fixing arrangements complete all as per directed by Engr-in–charge. |
| 111 | S & F plastic body exhaust fan 250mm sweep complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding and connecting to ceiling rose with flexible copper cable including making holes on the wall and making good disturbed surfaces complete all as specified and as directed. |
| 112 | S & F Factory made distribution board powder coated sheet metal enclosure single phase neutral (SPN) for fixing of MCBs ,4 way, double door with 200 amps rated copper bus bar including grouting on the wall with screws and rawal plugs and making good disturbed surfaces complete all as specified and directed. |
| 113 | S & F MCB SPN of capacity 40-63 Amps, 240 V, 10 KA 'C' curve complete all as specified and directed. |
| 114 | S & F MCB SP of capacity 5-32 Amps, 240 V, 10 KA 'C' curve complete all as specified and directed. |
| 115 | M & L for new earthing with galvanised steel earth plate electrode 600mm X 600mm X 6mm thick burried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to 4mm dia GI wire protected by 20 mm bore light grade galvanised iron pipe and other end connected to test point as directed including funnel with wire mesh and watering pipe 20 mm bore medium grade galvanised iron pipe with charcoal and common salt in alternate layers of 15 cm thickness all around the GI plate electrode with concrete pit in PCC 1:3:6 type C-1 with cast iron frame including cast iron cover 10mm thick hinged to CI frame and 6mm MS rod for handle, necessary excavation and earth work in hard/dense soil and disposal of soil to a distance n exc 50 m and necessary testing complete all as shown in electrical plate No 3 of SSR part-I complete all as specified and directed. |
| 116 | Supply, fixing, commissioning & testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, 1100 volts, cross sectional area 06 sqmm 2 core laid in trenches/fixed to wall/under road/pipe etc with copper cable glands & copper thimbles complete all as specified and directed. |
| 117 | M & L for 25mm bore steel water tubing medium grade galvanised with suitable fitting laid in trenches complete all as specified and directed. |
| 118 | M & L for cutting of existing GI pipe line 25mm dia for inserting Tee and reducer etc for taking 25mm dia branch pipe including fittings complete all as specified and directed.Note : fittings likes Tee, reducer etc and GI brach pipe shall be include in qouted rate. |
| 119 | M & L 25mm bore GI tube light grade with suitable fittings for protection of cable complete all as specified and directed. |
| 120 | S & F 25mm dia gun metal gate valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed. |
| 121 | Excavation in trenches not exceeding 1.50 m wide and n.exc 1.5 m in depth for foundation of poles, cable etc, not exc 10 sqm on plan and getting out in soft/loose soil including taking out brick protection etc complete all as specified and directed. |
| 122 | Returning, filling in trenches including spreading, leveling watering and ramming in layers not exceeding 25cm all as specified. |
| 123 | Removing of surplus soil to a distance not exceeding 50 meter and deposited where directed at a level not exceeding 1.50 meter above the starting point complete all as specified and directed. |
| 124 | M & L for sand cushioning by spreading in trenches crushed sand by gently by punning down manually as in cable protection all as specified and as directed by Engineer -in-charge. |
| 125 | Supply and laying burnt bricks of sub-class 'B' designation 75 of old size brick laid in trenches for cable protection complete all as specified and directed. |
| 126 | M&L 50 mm bore GI tube medium grade for solar light pole fixed into ground with embeded PCC including earth work complete all as specified and directed with following parameter.Note: (i) Rate is inclusive of cost of excavtion, earth work (ii) PCC for foundation. Excavated Pit Size:- 0.3x0.3x0.8 mtr, complete filling (0.3*0.3*0.8) by plain cement concrete type C2 1:3:6 (40mm graded crushed stone aggregates), PCC 1:3:6, type C-1, using 20mm graded stone aggregate add in coping (0.15m X0.15m X0.15m) of poles, Removing excavated materials to a distance not exceeding 50 metre and depositing where directed |
| 127 | Supply, install and Commissioning of 40W solar street light manufactured designed complete with efficient mono crystalline solar PV module, Lithium ferro Phosphate battery with in-built BMS technology, High efficiancy LED, MPPT solar charge Controller & Aluminium Extruded body, with intelligent control system which manage and maintained battery unit to provide longer life having IP 65 protection. The intelligent microwave sensor controls the dimming and brightness of light, effectively extend the working time all as specified and directed by Engineer-in-charge. Make-CROMPTON SONIVA PRO or Equivalent as approved make list. Note- The Contractor have to submit document of manufacturer warranty for the solar lights as given by manufacturer. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 07, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 days
Aug 07, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 days
Aug 07, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 daysAug 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender