Tender For Repair And Maintenance Of Lt Cables, Lt Panels, Mccbs, Acbs, Change Over Switch, Earthings, Street Lights, High Mast Lights, Steel Tubular Pole, Pole Box Assembly, Timer Panels Alongwith Connected Items At Carriapa Parade Ground, C Area, P
Tender Overview
Project Description
Tender for Repair And Maintenance Of Lt Cables, Lt Panels, Mccbs, Acbs, Change Over Switch, Earthings, Street Lights, High Mast Lights, Steel Tubular Pole, Pole Box Assembly, Timer Panels Alongwith Connected Items At Carriapa Parade Ground, C Area, Parade Road And Dgncc Area Under Age Elect Supply (Sldc) Under Ge (U) Elect Supply Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | M&L for excavation in trenches not exc. 1.5 m wide and not exc 1.5 mtr deep in soft/loose soil for laying / taking up/ taking down of cables and getting out and levelling of bottom suface to required level complete all as specified and directed by Engineer- in- Charge. |
| 2 | M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm deep as in soil complete all as specified and directed by Engineer- in- Charge. |
| 3 | M&L for removal of excavated material n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above in starting point complete all as specified and directed by Engineer- in- Charge. |
| 4 | S & F of common burnt bricks as mechanical protection of this cables using old size sub class ‘B’ bricks laid dry flat over the cable width equal to the length complete all as specified and directed by Engineer- in- Charge. |
| 5 | Laying only for old bricks obtained from Excavation under item No 1 complete all as specified and directed by Engineer- in- Charge. |
| 6 | M&L for sand filling in trenches for cushioning of UG cables as layers of 8 cm before laying and 15 cm after laying of cables complete all as specified and directed by Engineer- in- Charge. |
| 7 | Supply, laying, jointing, testing and commissioning in replacment of LT underground cables 1100 volts grade, PVC insulated XLPE and PVC sheathed, heavy duty armoured, with multistranded aluminium conductors, IS-1554 marked, laid in trenches complete all as specified and directed by Engineer- in- Charge.Cables of the following sizes:-Note :- Excavation, earth work ,cable protection , sand fillings , cable joint shall be measured and paid separately. |
| 8 | 16 Sqmm 4 core |
| 9 | 25 Sqmm 4 core |
| 10 | 35 Sq mm 3.5 core. |
| 11 | 50 Sq mm 3.5 core. |
| 12 | 70 Sqmm 3.5 core |
| 13 | 95 Sqmm 3.5 core |
| 14 | 120 Sqmm 3.5 core |
| 15 | 185 Sqmm 3.5 core |
| 16 | Supply, fixing and testing straight through joint heat shrinkable type with jointing kit suitable for cable PVC / XLPE insulated armoured heavy duty aluminium conductor 1100 Volts grade complete all as specified and directed by Engineer- in- Charge for the following sizes :- |
| 17 | 25-50 Sqmm x 3.5 core/ 4 core |
| 18 | 70-150 Sqmm x 3.5 core |
| 19 | 185-240 Sqmm x 3.5 Core |
| 20 | M&L for re-painting of LT Steel tubular poles of any sizes (9/11 Mtr Long) with apply of 2 coats of aluminium paint including rubbing with wire brush/emery paper & writing pole Nos in appropriate size of letters including making yellow and black strips upto height of 1.5 mtr above from ground level complete all as specified and directed by Engineer- in- Charge. |
| 21 | M&L for re-painting of LT Panels/feeder pillars of approx size 2 to 4 Sqm with 2 coats of super enamal paint over a coat of red-oxide with spray gun including writing of feeder pillar numbers in appropriate size of letters complete all as specified and directed by Engineer- in- Charge. |
| 22 | S&F in replacement KIOSK box wheather proof including made out of one piece mounted SMC base and door pole mounted hinged door size 333x233x120mm out side and 300x200x105mm inside dimensions comprising of aluminium bus bar 4 strips for 3 phase and neutral 63 Amps including embossing/painting of danger notice of size not less than 10cm x 7.5cm with letters, figures and conventional skull and bones in signal red colour on front face of KIOSK box body complete all as specified and directed.Incluiding MS clamp of size 25x3 mm with suitable size nut, bolts & washer complete all as specified and directed by Engineer- in- Charge. |
| 23 | M&L for boring of hole under road/pavement/hard standing or any other situation by manual means and suitable for passing of GI pipe 50 to 100 mm bore and making good both ends complete all as specified and directed by Engineer- in- Charge. |
| 24 | S&F in replacement GI Pipe (light grade) with necessary accessories/ fittings for cable protections/pole for crossing of culverts/nallah complete all as specified and directed by Engineer- in- Charge of following bore sizes :- |
| 25 | 50 mm |
| 26 | 80 mm |
| 27 | 100 mm Please Enable Macros to View BoQ information |
| 28 | 100 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender