Tender For Repair/ Maintenance To Area/ Road Side Drainage, Path Way, Kerb Stone, Compound/ Boundary Wall, Fencing, Gate And Certain Allied Works In Residential And Tech Area At R&De(E), Dighi, Pune
Tender Value
30 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
14 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance To Area/ Road Side Drainage, Path Way, Kerb Stone, Compound/ Boundary Wall, Fencing, Gate And Certain Allied Works In Residential And Tech Area At R&De(E), Dighi, Pune
BOQ
| Sl. No. | Item Description |
| 1 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to outside MOD land or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved complete all as specified and directed. |
| 2 | Dismantling old plaster or skirting raking out joints on brick or stone walls, etc. and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and directed. |
| 3 | Demolishing brick work In cement mortar manually/ by mechanical means including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and stacking of serviceable material and disposal of unserviceable material within 50 metres lead complete all as specified and directed. |
| 4 | Demolishing stone rubble masonry manually/ by mechanical means including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and stacking of serviceable material and disposal of unserviceable material within 50 metres lead complete all as specified and directed. |
| 5 | M&L for Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil complete all as specified and directed. |
| 6 | All As per Item herein before but for stones/rocks complete all as specified and directed. |
| 7 | M & L for stone masonry Random rubble masonry random rubble, uncoursed, well bonded, bedded and solidly hearted, with hard stone in foundation and plinth and upto floor level V including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand complete all as specified and directed. |
| 8 | M & L for Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) :Keyed pointing complete all as specified and directed. |
| 9 | M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C-1 using 20 mm graded stone aggregate, exc. 10 cm in width and setting in CM 1:6, complete all as specified and directed. |
| 10 | M & L for Brick work with modular extruded brunt fly ash clay sewer bricks (Conforming to IS: 4885 ) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth and upto floor level V with :Cement Mortar 1:4 ( 1 cement : 4 coarse sand) complete all as specified and directed. |
| 11 | M&L for Rendering 12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) on fair faces of brick work or concrete surfaces and making the surface even and fair without using extra cement complete all as specified and directed. |
| 12 | M&L for Rendering 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) on fair faces of stone work or concrete surfaces and making the surface even and smooth without using extra cement complete all as specified and directed. |
| 13 | S&F in repairs factory made 50mm thick precast reinforced (steel fibres) cement concrete drain cover type KKLD (05 Ton capacity) square or rectangular in size area of each cover exc 0.5 Sqm supported on walls including 10mm to 12mm dia steel handles to each covers complete all as specified and directed.Note : Rate is including Reinforcement (Steel fibres) used in the drain covers |
| 14 | Cleaning of storm water drains from mud, vegetatation, debries etc from drains and removing n exc 50m from the starting point and levelled as directed by Engineer In Charge, including Removing and placing of precast cement concrete drain covers carefully (without damaging) after cleaning / reapair works complete all as specified and directed. |
| 15 | Demolition of cement concrete on ground floor and pavings n exc 15cm thickness complete all as specified and directed. |
| 16 | M & L for plain cement concrete of specified grade for retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., including the cost of centering and shuttering - All work up to 1st floor level with 1:2:4 (1 cement : 2 coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 4 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 25%) complete all as specified and directed. |
| 17 | M & L for plain cement concrete of specified grade for retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., including the cost of centering and shuttering - All work up to 1st floor level with 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) complete all as specified and directed. |
| 18 | M & L for plain cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 cement : 4 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 8 graded stone aggregate 40 mm nominal size Recycled Aggregate (RA) as in sub base concrete, mass filling complete all as specified and directed. |
| 19 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. and Supply and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour, pattern over & including 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern complete all as specified and directed. |
| 20 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm and Supply and laying factory made rubber moulded Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with Ordinary cement without any pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) complete all as specified and directed. |
| 21 | M & L for pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, complete all as specified and directed. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.) |
| 22 | Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead complete all as specified and directed. |
| 23 | Supply and laying at or near ground level Precast kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 24 | Excavating Post holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil in All kinds of soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. complete all as specified and directed. |
| 25 | Dismantling fencing wire mesh, any type, size, shape and thickness etc complete all as specified and directed. with necessary battens and beading including stacking the serviceable material within 50 metres lead complete all as specified and directed. |
| 26 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead and weight chart to be produced by contractor of approved make complete all as specified and directed.. |
| 27 | Supply and fix G.I. chain link fabric fencing Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade required width in mesh size 50x50 mm including strengthening with 3 mm dia wire or nuts, bolts and washers as required complete all as specified and directed. |
| 28 | Taking down for repairing and refixing in new or same position of chainlink fencing of any shape and size including fencing posts and horizontal supporting bars, fillets, bolt and nuts etc complete including necessary excavation/ earth work complete all as specified and directed.Note: Replacement of any old materials by new one will be measured and paid in relevant items of this schedule. |
| 29 | Supply only Chain link MS galvanised fencing, of size of any size complete and weight chart to be produced by contractor of approved make complete all as specified and directed. |
| 30 | S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10 cm long bolts including nuts and washers complete weight chart to be produced by contractor of approved make complete all as specified and directed. |
| 31 | S & F Steel reinforcement Thermo-Mechanically Treated bars 10mm dia and over of grade Fe-500D or more. for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips including straightening, cutting, bending, placing in position and binding all complete for both above and below plinth level and weight chart to be produced by contractor of approved make complete all as specified and directed. |
| 32 | S & F Non-structural steel framed work as in doors or gates fencing post & like of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to beprepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 33 | M & L for plain cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 6 graded stone aggregate 40 mm nominal size Recycled Aggregate (RA) ) in foundations, filling and mass concrete complete all as specified and directed. |
| 34 | S & F fencing With G.I. barbed wire with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc.complete all as specified and directed. (Cost of posts, struts, earth work and concrete work to be paid for separately only). Payment to be made per metre cost of total length of barbed wire used.. |
| 35 | Taking down old barbed wire fencing from posts and refixing the same in new or old position,including, securing or tying at crossings with and S & F of galvanised mild steel wire, staples or steel pins, etc.(each line wire to be measured) complete all as specified and directed. |
| 36 | Dismantling G.S. Sheet plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof covering any type pattern in roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead Note : Work will be executed at a height of upto 5m. Hence necessary scaffloding and all sefety precaution deemed to be included under rate quoted by contractor complete all as specified and directed. |
| 37 | S & F precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required complete all as specified and directed.Note : Work will be executed at a height of upto 5m. Hence necessary scaffloding and all sefety precaution deemed to be included under rate quoted by contractor. |
| 38 | S & F precoated galvanised steel sheet in Ridges plain (500 - 600mm) roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete all as specified and directed.Note : Work will be executed at a height of upto 5m. Hence necessary scaffloding and all sefety precaution deemed to be included under rate quoted by contractor. |
| 39 | Supply and fixing structural steel work in tubular trusses and tubular posts , including special shaped washers,mild steel screws bolt and steel plates etc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 with one shop coat of zinc chromate primer paint complete incl taking down of old wooden trusses etc complete all as specified and directed. |
| 40 | M & F for Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture complete all as specified and directed. |
| 41 | M & L for Painting with synthetic enamel paint on old concrete surface/kerb stone of any description of approved brand and manufacture of required colour to give an even shade :One or more coats on old work complete all as specified and directed. |
| 42 | M & L for Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint (removal included of existing paint surface) including Sundries for brushes,sand paper,scaffolding etc. complete all as specified and directed. |
| 43 | M&L for repair Rough dressed lime stone (Shabad Stone) slab flooring 20-25 mm thickness, jointed and pointed in cement mortar 1:6 and pointed in cement mortar 1:3 complete all as specified and directed. |
| 44 | Demolishing R.C.C. work manually/ by mechanical means of any description and in any position not otherwise specifically provided including stacking of steel bars and disposal of unserviceable material within 50 metres lead complete all as specified and directed. |
| 45 | M & L for Providing and laying in position specified grade of Precast reinforced cement concrete as in cover slab set in CM 1:4, including the cost of centering, shuttering, finishing and excluding (reinforcement) - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand incuding manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 20% : 4 graded stone aggregate 20 mm nominal size of Recycled Concrete Aggregate (RCA) upto 20%) complete all as specified and directed. |
| 46 | M&L 6mm to 8mm dia mild steel TMT bars, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 47 | M & L for painting old painted surfaces of steel & iron of any description with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work |
| 48 | M&L for preparation of old tiles of any description exc 10cm width or girth and applying two coats of Terracotta Floor Guard Exterior Paint complete all as specified and directed |
| 49 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. complete all as specified and directed. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender