Tender For Certain Repair To Road In Tech Area At Af Stn Halwara Under Ge (Af) Halwara
Tender Value
49.83 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
0 days left
EMD
99660
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ludhiana → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repair To Road In Tech Area At Af Stn Halwara Under Ge (Af) Halwara
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 03-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 10-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Material & Labour for repair to pot holes any depth not exceeding 1.0 Sqm each including sweeping free from dust and mud, or water scoring sunken surfaces in road path etc cutting around edges, at least 25mm in depth and making good by applying tack coat using paving bitumen VG-10 @ 5Kg per 10 Sqm, putting in premixed bituminous macadam well rammed and sealed with binder using paving bitumen at the rate of 9.8 Kg Per 10Sqm binded with 0.09 cum stone chipping 6.3mm size and again well rammed (including supply of premixed macadam binder and chippings) depth of pot hole exceeding 30mm complete all as specified and as directed by Engr-in-charge. Note :- (i) Pot holes shall be marked by Engineer-in-charge before commencement of work and same shall be entered in MB after making good and before laying of bituminous premix carpet.(ii) GE will inform Accepting Officer for convening a Board of Officers at least seven days prior to execution of this item. |
| 2 | Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with compressor to remove all loose dirt etc. complete all as specified and directed by Engineer in Charge. |
| 3 | Material and labour for applying evenly a priming/tack coat of bitumen (VG-10) on existing bituminious surfaces at the rate 5 Kg per 10 Sqm complete all as specified and directed by Engineer in Charge. |
| 4 | Material and labour for Premix bituminous macadam laid / rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using Paving bitumen (VG-30), binder content @ 4.0% by weight of total mix (Preparation of surface and priming / tack coat shall be measured & paid separately) and compacted with 8 to 12 ton power roller and compacted required camber and gradient complete all as specified and directed.Note : (i) GE will inform Accepting Officer for convening a Board of Officers at least seven days prior to execution of this item.(ii) Hot Mix plant of adequate capacity shall be used for heating and mixing of agregates and binder and shall be laid in single layer with mechanical sensor paver all as specified and directed.(iii) The design mix shall be carried out from Zonal laboratory/ Govt Engineering Colleges/ CTL or any E-in-C/ MES approved lab as approved by GE before incorporation in work and testing charges shall also born by the contractor. |
| 5 | Material and labour for Premix bituminous macadam laid / rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using Paving bitumen (VG-30), binder content @ 4.0% by weight of total mix (Preparation of surface and priming / tack coat shall be measured & paid separately) and compacted with 8 to 12 ton power roller and compacted required camber and gradient complete all as specified and directed.Note : (i) GE will inform Accepting Officer for convening a Board of Officers at least seven days prior to execution of this item.(ii) Hot Mix plant of adequate capacity shall be used for heating and mixing of agregates and binder and shall be laid in single layer with mechanical sensor paver all as specified and directed.(iii) The design mix shall be carried out from Zonal laboratory/ Govt Engineering Colleges/ CTL or any E-in-C/ MES approved lab as approved by GE before incorporation in work and testing charges shall also born by the contractor. |
AI Tender Summary
Tender Timeline
Aug 03, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 10, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender