Tender For Repairs To Roof Treatment And Rectification Of Seepage/ Leakage And Certain Allied Works In Certain Buildings At Vrde Ahmednagar
Tender Value
25 Lakhs
Estimated cost
Bid Submission
04 Aug 2026
14 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Roof Treatment And Rectification Of Seepage/ Leakage And Certain Allied Works In Certain Buildings At Vrde Ahmednagar
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling asbestos cement sheet roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 meters lead complete all as specified and directed. |
| 2 | Dismantling wood work of sectional area below 40 square centimeters in frames, trusses, purlins and rafters up to 10 meters span and 5 meters height including stacking the material within 50 meters lead complete all as specified and directed. |
| 3 | S & F for precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metere or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required complete all as specified and directed. |
| 4 | S & F for precoated galvanised steel sheet roofing accessories - Ridges plain(500-600mm) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete all as specified and directed. |
| 5 | M & L for Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete all as specified and directed. |
| 6 | M & L for cement concrete 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level complete all as specified and directed. |
| 7 | M&L for treatment of all concrete defects in RCC members including raft slab, column, footing and retaining wall in the following manner complete all as specified and directed.(a) Opening of joints/cracks such as cold joints, construction joints, cracks, corner joints and areas around honeycombing in RCC by forming V/U shaped groove of approximate size 25 mm x 25 mm, thereafter providing and applying repair polymer and sealing the groove with repair mortar.(b) Injection grouting wherever required, grouting the joints through PVC injection nozzles fixed at 1 m c/c or less, using cement slurry grout with injection grout additive.(c) Providing and applying two-component water-based epoxy primer on bare concrete slab.(d) The entire area shall be taken up for thorough surface preparation with compressed air blow and mechanical removal of debris, laitance, etc., after which providing 20 mm thick cement mortar plaster in CM 1:4 mixed with approved waterproofing compound to make the surface smooth and even.(e) The surface shall then be waterproofed with mechanical spray application of high-build elastomeric hybrid polyurea waterproofing coating at an average thickness of 1.5 mm, complete in all respects as per manufacturer’s specifications.Note : Gurantee Bond and security deposit shall be as specified and directed. |
| 8 | M&L for cleaning accessible and inaccessible roof tops, terraces, sunshades and similar horizontal rain-exposed surfaces, including removal of accumulated silt, sand, mud, leaves, small plants and other rubbish, and clearing blockages in rainwater pipes, khurras, spouts and mouths of rainwater outlets, complete, including throwing the rubbish outside Defence land, complete all as specified and directed. |
| 9 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 meters lead complete all as specified and directed. |
| 10 | S & F for 8 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber tiled false ceiling of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and complete all as specified and directed. |
| 11 | S & F for 16 mm thick acoustical ceiling tiles of size 595 x 595 mm, square hole type, on microlock suspended grid system of SS 304 sections, including suspension framework, wall angles, main runners, cross tees, hangers, clips, fasteners, cutting to size, levelling, alignment and all accessories complete, including making good the edges and all disturbed surfaces, all as per manufacturer’s specification complete all as specified and directed. |
| 12 | S & F for 16 mm thick square hole fulltone acoustical wall paneling panels of size 1200 x 2400 mm, complete with G.I. framework/sub-frame, 50 mm thick glass wool acoustic insulation infill, approved fabric wrapped / perforated acoustic board finished facing, edge trims, fasteners, supports and all necessary accessories, including making good the surface complete all as specified and directed. |
| 13 | Dismantling doors, windows and clerestory windows (steel, aluminium or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead of area 3 sqm and below complete all as specified and directed. |
| 14 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead of area 3 sq. meters and below complete all as specified and directed. |
| 15 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, complete all as specified and directed. |
| 16 | S& F for powder coated aluminium (minimum thickness of powder coating 50 micron) work for fixed portion/frames of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, complete all as specified and directed. |
| 17 | S & F for powder coated aluminium (minimum thickness of powder coating 50 micron) work sliding type for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots, rollers, tracks and interlocking sections etc and fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, complete all as specified and directed. |
| 18 | S & F for pressed steel door frames for profile C (125x60mm) conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface, fixing with adjustable lugs with split end tail to each jamb including filling hollow portion of frame with PCC 1:3:6 type C1 complete all as specified and directed. |
| 19 | M & L for Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B1 complete, depth of embedded portion of hold fasts exc half brick but n exc one brick complete all as specified and directed. |
| 20 | S & F for factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws,complete all as specified and directed.Note :- Butt hinges with SS Screws will be measured and paid separately. |
| 21 | S & F for 35 mm thick factory made second class teak wood wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with with ISI marked M.S. pressed butt hinges bright finished of required size and necessary screws complete all as specified and directed. |
| 22 | S & F for IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete of size125x64x1.90 mm complete all as specified and directed. |
| 23 | S & F for 300x16 mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete all as specified and directed. |
| 24 | S & F for 250x10 mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed. |
| 25 | S & F for 125mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed. |
| 26 | S & F for factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & destroyother Frames/Chowkhat size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A Category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 27 | S &F for 25mm factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminated with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. |
| 28 | S & F for IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete.size 100X58X1.90 mm complete all as specified and directed. |
| 29 | S &F 150x10 mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed. |
| 30 | S & F for 100mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed. |
| 31 | S & F for glazing with float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete all as specified and directed. |
| 32 | S & F for stainless steel (Grade 304) fly proof wire gauze of 0.5mm dia wire and 1.4mm aperture on both sides to windows clerestory windows & doors with M.S Flat 15x3 mm and nuts & bolts complete all as specified and directed. |
| 33 | S & F in repairs Galvanised M.S. fly proof Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete all as specified and directed. |
| 34 | S&F in repairs 3 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beading, area not exc 0.5 Sqm in each pane including hacking out old broken glass, cleaning rebates in preparation for reglazing carefully, taking out beads, rubbish off the premises complete all as specified and directed. |
| 35 | S & F in repairs aluminium hanging floor single rubber door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete all as specified and directed. |
| 36 | S & F in repairs aluminium extruded section body tubular type universal hydraulic door closer (door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete all as specified and directed. |
| 37 | S & F in repairs double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing with stainless steel cover plate minimum 1.25 mm thickness with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete all as specified and directed. |
| 38 | S &F for 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. complete all as specified and directed. |
| 39 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead complete all as specified and directed. |
| 40 | Dismantling tile work in floors,wall and roofs laid in cement mortar thickness of tiles above 25mm and upto 40mm, including stacking material within 50 meters lead complete all as specified and directed. |
| 41 | S & F for vitrified floor tiles in sizes of tiles 600x600mm of 09 to 10mm thickness with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid over and including 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete all as specified and directed. |
| 42 | S & F for vitrified tiles in sizes of tiles 600x600mm of 09 to 10mm thickness with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over and including 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete all as specified and directed. |
| 43 | S & F for Ist quality ceramic glazed wall tiles 350 x 250/ 450 x 350 conforming to IS: 15622 of 07 to 08 mm thickness of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over and including 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete all as specified and directed. |
| 44 | S & F for Ceramic non skid floor tiles of size 300x300 mm of 7 to 08 mm thickness, of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid over and including 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete all as specified and directed. |
| 45 | S & F for 18 mm thick granite stone slab of colour black, cherry/Rubby red over 0.50 sqm, gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over and including 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels all as specified and as directed. |
| 46 | M & L for edge moulding to 18 mm thick Granite work stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete all as specified and directed. |
| 47 | S & F for water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying complete all as specified and directed.(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and water proofing compound mixed slurry.Note : Gurantee Bond and security deposit as specified and directed. |
| 48 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level complete all as specified and directed. |
| 49 | S &F on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes inlet, outlet and overflow pipes but without fittings and the base support for tank complete all as specified and directed. |
| 50 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba complete all as specified and directed. (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 51 | S & F in repairs 20 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) complete all as specified and directed. |
| 52 | S & F for PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. pressure, with plastic floats complete : 20 mm nominal bore, 120 mm long, weighing not less than 198 gms complete all as specified and directed. |
| 53 | S & F for in repair water tank cover of suitable size and shape for existing water tank, including necessary fixing and locking arrangement, to suit the existing provision, complete all as specified and directed. |
| 54 | Dismantling 15 to 40 mm dia G.I. pipe internal Work- Exposed on wall including stacking of dismantled pipes (within 50 meters lead) complete all as specified and directed. |
| 55 | S &F 20mm Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings for external work. This includes jointing of pipeS & F forittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete all as specified and directed. |
| 56 | S & F for 15 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing for Concealed work, including cutting chases and making good the walls etc.. This includes jointing of pipeS & F forittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete all as specified and directed. |
| 57 | S & F in repairs on wall face ,110mm diameter unplasticised Rigid PVC single socketed drain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and directed. |
| 58 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba complete all as specified and directed. |
| 59 | S & F for White Vitreous china Orissa pattern water closet squatting pan (Indian type W.C. pan ) pan of size 580x440 mm with integral type foot rests with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete all as specified and directed including cutting and making good the walls and floors wherever required |
| 60 | S & F for white vitreous china pedestal type water closet (European type W.C. pan) with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete all as specified and directed. |
| 61 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 meters lead complete all as specified and directed. |
| 62 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metere long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified complete all as specified and directed. |
| 63 | S & F in repairs White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required complete all as specified and directed. |
| 64 | S& F semi rigid pipe, 32 mm dia P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete all as specified and directed. |
| 65 | S & F in repairs 15mm bore uplasticised PVC connection pipe of length 45cm with brass unions complete all as specified and directed. |
| 66 | S &F in repairs PTMT bib cock 15mm nominal bore, 86 mm long, weighing not less than 88 gms of approved quality and colour complete all as specified and directed. |
| 67 | S & F in repairs 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 complete all as specified and directed. |
| 68 | S & F in repairs 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms complete all as specified and directed. |
| 69 | S & F in repairs PTMT stop cock 15 mm nominal bore, 86 mm long, weighing not less than 88 gms of approved quality and colour complete all as specified and directed. |
| 70 | S & F in repairs C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.(a) 15mm nominal bore complete all as specified and directed. |
| 71 | S & F in repairs PTMT pillar cock 15 mm nominal bore, 107 mm long, weighing not less than 110 gms of approved quality and colour complete all as specified and directed. |
| 72 | S&F in repairs 15 mm dia fancy type, pillar taps cast copper alloy with capstan head chromium plate screwed down high pressure long shank and fly nut screwed for iron pipe complete all as specified and directed. |
| 73 | S & F in repairs PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms complete all as specified and directed. |
| 74 | S & F in repairs 150mm dia C.P. brass shower rose with 15 or 20 mm inlet complete all as specified and directed. |
| 75 | Demolishing brick work in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead complete all as specified and directed. |
| 76 | M & L for brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in all shapes and sizes in 1:4 (1 cement : 4 coarse sand) Cement mortar complete all as specified and directed. |
| 77 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead complete all as specified and directed. |
| 78 | M & L for External 12 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand) complete all as specified and directed. |
| 79 | M & L internal 12 mm cement plaster of mix 1:6 (1 cement: 6 coarse sand) complete all as specified and directed. |
| 80 | M & L for repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 Sqm meters and under with cement mortar 1:4, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground complete all as specified and directed.. |
| 81 | M & L for femoving dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete all as specified and directed. |
| 82 | M & L for white cement based putty of average thickness 1mm of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete all as specified and directed. |
| 83 | M & L for distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour over new work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre complete all as specified and directed. |
| 84 | M & L for distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer over old work (one or more coats) including applying additional coats wherever required to achieve even shade and colour complete all as specified and directed. |
| 85 | M & L for finishing walls with Acrylic Smooth exterior paint of required shade over new work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete all as specified and directed. |
| 86 | M & L for finishing walls with Acrylic Smooth exterior paint of required shade over old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface complete all as specified and directed. |
| 87 | M & L for finishing walls with water proofing cement paint of required shade over new work (Two or more coats applied @ 3.84 kg/10 sqm) complete all as specified and directed. |
| 88 | M & L for finishing walls with water proofing cement paint of required shade over old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat complete all as specified and directed. |
| 89 | M & L for applying priming coat with ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content complete all as specified and directed. |
| 90 | M & L for applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works complete all as specified and directed. |
| 91 | M & L for painting synthetic enamel paint with two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture of required colour to give an even shade complete all as specified and directed. |
| 92 | M & L for painting with synthetic enamel paint one or more coats on old work of approved brand and manufacture of required colour to give an even shade complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender