Tender For special Repairs To Bldg No. T-6/5 (Or Living) Of 19 Maratha Li At Phulbari Provn Of 20X20 Feet Store Room Near Mi Room And 10X10 Mtrs Shed With Hardstanding To Cover Ro Point Of 19 Maratha Li (Mil Stn Thakurbari) Under Ge (N) Tezpur.
Tender Value
33.84 Lakhs
Estimated cost
Bid Submission
04 Aug 2026
3 days left
EMD
67700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repairs To Bldg No. T-6/5 (Or Living) Of 19 Maratha Li At Phulbari Provn Of 20X20 Feet Store Room Near Mi Room And 10X10 Mtrs Shed With Hardstanding To Cover Ro Point Of 19 Maratha Li (Mil Stn Thakurbari) Under Ge (N) Tezpur.
BOQ
| Sl. No. | Item Description |
| 1 | BoQ BOQ Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GARRISON ENGINEER TEZPUR (NORTH) NAME OF WORK : SPL REPAIRS TO BLDG NO. T-6/5 (OR LIVING) OF 19 MARATHA LI AT PHULBARI PROVN OF 20X20 FEET STORE ROOM NEAR MI ROOM AND 10X10 MTRS SHED WITH HARDSTANDING TO COVER RO POINT OF 19 MARATHA LI (MIL STN THAKURBARI) UNDER GE (N) TEZPUR. Contract No : GE(N)/TEZ/ OF 2026-2027 (8306) Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Description of items of works Item Code / Make Approx No. of quentity required. Units Pre Priced Rate (in. Rs.) as Defined by MES Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures to be entered by the Bidder Rs. P. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT (In INR) TOTAL AMOUNT With Taxes TOTAL AMOUNT (In Words) |
| 2 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of mangalore pattern of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old unserviceable existing roof sheet of any type complete all as specified and directed. |
| 3 | S&F except sheeting Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of mangalore pattern of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old unserviceable existing roof sheet of any type complete all as specified and directed. |
| 4 | S&F Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in valley/gutter/eve board fixed with self tapping screws etc., including dismantling of old unserviceable existing roof sheet of any type complete all as specified and directed. |
| 5 | S&F MS steel work in (MS round/square/rectangular pipe,angle) posts,truss ,purlin and water tank stagging including special shaped washers etc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 with one shop coat of zinc chromate primer paint including dismantling of old unserviceable existing MS frame works complete all as specified and directed. |
| 6 | Erection Fixing only Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed. |
| 7 | S&F Fe 410-W (Gde-E-250) quality mild steel plate plain or chequered,5 mm thick or over in thickness including dismantling of old unserviceable existing MS frame works complete all as specified and directed. |
| 8 | S&F Mild steel screw bolts (machine made) with hexagonal /square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut,length of bolt exc 5cm but n exc 10cm long dia of shank 5 to 10 mm complete all as specified and as directed. |
| 9 | M&L for 25 mm thick cement concrete (1:2:4) type B1 ( 20mm graded stone aggregate) as in floor finished rough to receive floor finishes complete all as specified and directed. |
| 10 | M&L coloured glazed ceramic tiles 200x 300x7 mm thick, in vertical surfaces, skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as directed. |
| 11 | M&L for rendering 10mm thick on brick or concrete or stone surfaces in cement mortar (1:4) as in screed bed/backing coat for laying wall finishes complete all as specified and directed. |
| 12 | M&L Non-skid joint free coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceding 0.11sqm but not exceeding 0.18 sqm, as in floor/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 13 | M&L for 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor/roof finishes etc. complete all as specified and directed. |
| 14 | S&F anodised GI snap grid (Size of grid 605mm x 605mm) frame work for false ceiling including GI wire 4mm thick as a suspender for GI snap grid framing including 4 mm thick Non asbestos fibre cement building board decorative type( e-board) fixed in aluminium snap grid frame work with screws including dismantling of old unserviceable existing ceiling works of any type complete all as specified and directed. |
| 15 | S&F in repair Galvanised mild steel wire cloth, 0.56 nominal dia of wire & average width of aperture 1.00mm with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 16 | M&L for AAC Block made with fine aggreagates, cement and aeration agent, straight or curved on plan to any radius in half brick thick walls built in CM 1:6 or chemical mortar adhesive, including demolition of old unserviceable existing brick works of any type complete all as specified and directed. |
| 17 | M & L for AAC Block made with fine aggregates, cement and aeration agent, straight or curved on plan exc 6 m mean radius built in Cement mortar 1:6 or with chemical mortar adhesive including demolition of old unserviceable existing brick works of any type complete all as specified and directed. |
| 18 | M & L rendering 5 mm thick in cement plaster in cement mortar (1:4) mixed with integral water proofing compound @3%by wt of cement over 10 mm thick backing coat in cm (1:4) on fair faces of brick work or concrete surface including taking down of old unserviceable existing brick works of any type complete all as specified and directed. Note : water proofing compound shall be measured and paid separately). |
| 19 | supplied only integral waterproofing liquid complete all as specified and directed. |
| 20 | Material and labour for rendering 15mm thick cement plaster in cement mortar (1:6) on unfair faces of brickworks complete all as specified and directed. |
| 21 | M&L for 75 mm 1:3:6 type C2 ( using 40 mm graded stone aggregate) as plinth protection/paving finish even and smooth without using extra cement including demolition of old unserviceable existing PCC works of any type complete all as specified and directed. |
| 22 | M & L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade 'B' complete all as specified and directed. |
| 23 | M&L PCC in surface channels and drains type B1 (1:2:4) using 20 mm graded stone aggregate including demolition of old unserviceable existing PCC works of any type complete all as specified and directed. |
| 24 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etc.complete all as specified and directed. |
| 25 | M&L for cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation etc. complete all as specified and directed. |
| 26 | M&L RCC type B-1(1:2:4) nominal mix using 20 mm graded stone aggregate as in column footing including raft footings, foundation, plinth beam, bases of column etc complete all as specified and directed. |
| 27 | M&L RCC type B-1(1:2:4) nominal mix using 20 mm graded stone aggregate as in columns, pillars etc complete all as specified and directed. |
| 28 | M&L RCC (1:2:4) nominal mix using 20 mm graded stone aggregate as in beam, roof beam, cantilevers, lintel beam, etc complete all as specified and directed. |
| 29 | M&L for Formwork to sides of pillars,posts, struts, piers, columns and stanchions in Square, rectangular or polygonal complete all as specified and directed. |
| 30 | M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. in flat surface complete all as specified and directed. |
| 31 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams in flat surface; and similar work; vertical or to batter complete all as specified and directed. |
| 32 | M&L for TMT bars , 10 mm dia and over cut to length, bent to shape required including cranking ,bending spirally, hooping for columns, hookings/ends and binding with and including MS wire not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 33 | M&L for Mild steel TMT bars 6 to 8 mm dia as in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 34 | Taking down chowkhats or frame with shutter (without taking off shutters from the frame) exe 1.5 sqm n.exe 4 sqm each. |
| 35 | Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each |
| 36 | S&F factory made steel windows with side hung shutter incl projecting type hinges with steel handles, and steel complete with glazing bars, dovetailed or welded complete all as directed. |
| 37 | ditto as item no 43 above but without glazing bars all as directed. |
| 38 | S&F Steel ventilators with side hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specified and directed. |
| 39 | S&F Factory made single extruded WPC(Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp- ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge complete all as specified and directed.(M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed. |
| 40 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge complete all as specified and directed.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 41 | S&F Butt hinges 100mm size, medium weight, cold rolled mild steel complete all as specified and directed. |
| 42 | S/F 150mm size aluminium anodised handles, cast type complete all as specified and directed. |
| 43 | S/F 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 44 | S&F aluminium alloy sliding door bolt 300mm long, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 45 | S&F Sheet glass 4.0 mm thick, ordinary quality & glazing with oil putty in square n.exc 0.5 sq.m in each pane complete all as specified and as directed |
| 46 | S&F in repair Aluminium anodised Brackets complete all as specified and directed. |
| 47 | S&F Harrison rails,mild steel, chromium plated with fixing brackets, stops, rollers etc.complete all as specified and directed. |
| 48 | Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick wall |
| 49 | S&F for 15mm bore steel tubing 'medium grade' galvanised, with all fitting and fixed complete incl cutting chasing pinning and making good to walls and ceilings or laid in floors including taking down of old unserviceable existing GI tubing complete all as specified and directed. |
| 50 | S&F for 20mm bore steel tubing 'medium grade' galvanised, with all fitting and fixed complete incl cutting chasing pinning and making good to walls and ceilings or laid in floors including taking down of old unserviceable existing GI tubing complete all as specified and directed. |
| 51 | S&F for 25mm bore steel tubing 'medium grade' galvanised, with all fitting and fixed complete incl cutting chasing pinning and making good to walls and ceilings or laid in floors including taking down of old unserviceable existing GI tubing complete all as specified and directed. |
| 52 | Laying only 15mm bore steel tubing 'medium grade' galvanised, with all fitting and fixed complete incl cutting chasing pinning and making good to walls and ceilings or laid in floors including taking down of old unserviceable existing GI tubing complete all as specified and directed.NOTE: The rate cleaning of old serviceable retrieved tubing shall deemed to be included in the quoted rate. |
| 53 | Laying only 20mm bore steel tubing 'medium grade' galvanised, with all fitting and fixed complete incl cutting chasing pinning and making good to walls and ceilings or laid in floors including taking down of old unserviceable existing GI tubing complete all as specified and directed.NOTE: The rate cleaning of old serviceable retrieved tubing shall deemed to be included in the quoted rate. |
| 54 | S&F Stop valve 20mm bore with long shank & cup (concealed type) of PTMT any colour screwed for iron pipe & fixed. (min. weight 20mm-112gms) |
| 55 | S&F Chromium plated shower roses 125mm size of Std quality and approved make with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 56 | S&F in repair CP tubular towel rail 600 mm long all as directed . |
| 57 | S&F in repairs Soap dish complete all as specified and directed. |
| 58 | S&F Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed. |
| 59 | S&F Vitreous China wash basin, white, flat back, size 630x450mm (flat back or angle back type) including brackets, cutting for and pinning 'in brackets waste coupling, waste pipe, grating complete all as specified and directed. |
| 60 | S&F in repair Water Closet (squatt pattern) of vitruous china squatting pan of pattern \\"ORRISA\\" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cirstern and flush pipe) including connection to trap and flushing pipe anti syphon pipe etc complete including trap set in and incl concrete complete all as specified and directed. |
| 61 | S&F wash down water closet (pedestal pan) including connection to drain pipes and to flushing pipes anti-syphonage pipe etc excluding flushing cistern incl flush pipe, jet and seat cover complete as as specified and directed |
| 62 | S&F 10 litres PVC Syphonic action type, Flushing cistern, high level, with inlet, ball valve, float chain and pull incl flush pipe and brackets complete. |
| 63 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 64 | S&F Waste coupling 32mm bore of PTMT (half or full threaded) min. weight 32mm-45gms) complete all as specified and directed. |
| 65 | S&F Vitreous China Urinal, Half stall type, white (back or corner wall type) complete incl providing and fixing plugs beding urinal against wall in cm 1:2 security urinal plug with and incl 60mm long brass screws pointing around urinal back in cement fixing automatically flushing cistern with bracket, flush pipes grating and union for discharge pipe complete all as specified and directed. |
| 66 | S&F cast copper alloy urinal spreader for fixing with 15 mm dia pipe complete all as specified and directed |
| 67 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 68 | S&F 15mm bore bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 69 | S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 70 | S&F 15mm bore stop valves/angle cock, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 71 | S&F PVC connections 15mm size with PTMT nuts of length 300/450mm complete all as specified and directed. |
| 72 | S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement including grating complete all as specified and as directed. |
| 73 | S&F PVC (SWR) gully trap 125/110 mm incl grating setting and jointing with solvent cement complete all as specified and directed. |
| 74 | M&L for PCC 1:3:6 type C1 as in concrete bed to drain pipe incl packing under haunching against the sides of pipes after are laid and tested for 110mm dia pipe complete all as specified and directed. |
| 75 | S&F 75mm bore PVC ( SWR) pipes single socketed ,in any length with rubber ring joints, fixed to wall complete all as specified and directed. |
| 76 | S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 77 | S&F PVC (SWR) bends of radius 75mm bore complete all as specified and directed. |
| 78 | S&F PVC (SWR) junction single,(Single T) equal or unequal of radius 75mm bore complete all as specified and directed. |
| 79 | S&F PVC (SWR) vent cowl 75mm bore complete all as specified and directed. |
| 80 | S&F 110mm bore PVC ( SWR) pipes single socketed ,in any length with rubber ring joints, fixed to wall complete all as specified and directed. |
| 81 | S&F 110MM PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 82 | S&F PVC (SWR) bends of radius 110mm bore complete all as specified and directed. |
| 83 | S&F PVC (SWR) junction single,(Single T) equal or unequal of radius 110mm bore complete all as specified and directed. |
| 84 | S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed. |
| 85 | S&F 1000 litre capacity ,rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) in position all specified in SSR Part –I complete all as specified and as directed. |
| 86 | M & L Ball valves (20 mm) high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed complete all as specified and as directed. |
| 87 | M&L for applying two coat of cement based paint paint on new surface including preparation of surface over and incl 1mm thick wall care putty and Priming plastered and other surfaces with alkali resistant priming paint complete all as directed. |
| 88 | M&L for Preparation of new plastered surfaces and applying two coats of OBD over a coat of alkali resistant primer over and incl 1mm thick wall care putty complete all as specified and directed. |
| 89 | Material and labour for preparation of new and previously un-treated steel surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 90 | Excavating post holes (or similar holes ) each n.exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm, watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed. |
| 91 | Surface dressing n exc 15cm deep soft/loose soil complete all as specified and directed. |
| 92 | M&L for rendering 15 mm thick,in CM 1:6. on fair faces of brick work or finished concrete surfaces even & smooth without using extra cement complete all as specified and directed. |
| 93 | M & L plain cement concrete type 1:3:6 type C2( 40mm agg) in foundations, filing & mass concrete complete all as specified and directed. |
| 94 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 95 | M&L for hardcore of guage n.exc 63mm deposited, spread and levelled, watered, well rammed to a uniform smooth surface n.exc 15cm thick using broken stone or boulders complete all as specified and directed. |
| 96 | M & L for providing 100 mm thick cement concrete type D-2, 1:4:8 using 40mm graded aggregrate as in sub in base of floors complete all as specified and directed. |
| 97 | M&L for providing machine cut polished Kota stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing in floors or horizontal surfaces complete all as specified and directed. |
| 98 | M & L for Kota stone 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed in vertical surfaces complete all as specified and directed. |
| 99 | M&L for 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor/roof finishes etc. complete all as specified and directed. |
| 100 | M&L for rendering 10mm thick on brick or concreteor stone surfaces in cement mortar (1:4) as in screed bed/backing coat for laying wall finishes complete all as specified and directed. |
| 101 | S&F for steel work in tubular trussess / posts including special shaped washers etc complete using ERW or including butt welded tubes confirming to IS 1161 - 1979 grade St -240., structural steel is painted one shop coat of zinc chromate primer paint (incl preparation of surface) at contractor's workshop before fabrication complete all as specified and directed. |
| 102 | M & L including preparing of new plastered wall surface and treated with three coat white wash on it complete all as specified and directed. |
| 103 | M & L for point wiring in replacement with 1.5 sqmm FRLSH, PVC insulated stranded copper conductor single core including non metalic PVC conduit (MMS ISI) of size not less than 20 mm on wall/over ceiling,modular metal boxes of required size and with modular plates incl of all accessories and all as specified including 1.5 sqmm FRLSH PVC insulated sheathed multistranded copper earth conductor to common earth and connected to earth dolly for light / fan/ bell point controlled by one switch.Note:- (i) Cost of PVC conduit, modular plates,frames, cover plates etc and cement mortar after wall chasis to make good disturbed surfaces; are deemed to be included in the quoted rate. |
| 104 | All as per item above but for 3 pin 5 Amps switch socket on independent board with 1.5 sq mm copper cable complete all as specified and directed. |
| 105 | All as per item above but for 3 pin 5 Amps switch socket on same board with 1.5 sq mm copper cable complete all as specified and directed. |
| 106 | All as per item above but for 3 pin 16 Amps switch socket combination on independent board with 2.50 sq mm copper cable complete all as specified and directed. |
| 107 | All as per item above but for 3 pin 16 Amps switch socket combination on independent board with 4 sq mm copper cable complete all as specified and directed. |
| 108 | S & F in replacement of modular switch 10A,1 module single pole, one way complete all as specified and directed. |
| 109 | S & F in replacement of modular socket outlet 5 pin ,6 Amps,2 module, 240 Volts complete all as specified and directed. |
| 110 | S & F in replacement of modular socket outlet 5 pin ,16 Amps,2 module, 240 Volts complete all as specified and directed. |
| 111 | S & F in replacement of modular switch 16A,1 module single pole, one way complete all as specified and directed. |
| 112 | S & F in replacement of ceiling rose polycarbonate type three terminals complete all as specified and directed. |
| 113 | S & F in replacement of modular step type electronic fan regulator ,two module 120 watt single pole 240 Volts complete all as specified |
| 114 | S&F in replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete |
| 115 | S&F in replacement of LED bulk head wall light fixture nearest to 10 Watt , pressure die cast housing , IP 66 protection and IK 09 impact resistance suitable for surface and wall mounting complete all as specified and as directed. |
| 116 | M&L in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area25 sq. mm 3.5core complete all as specified and directed. |
| 117 | M&L in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area6 sq. mm 2core complete all as specified and directed. |
| 118 | Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundations etc, or for shafts, wells, cesspits, man holes, pier holes etc not exc 10 sq m on plan and getting out in soft / loose soil complete all as specified and directed. |
| 119 | Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft / loose soil complete all as specified and directed. |
| 120 | Removing excavated materials (soil) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed. |
| 121 | Material and labour for sand cushioning for cable protection using clean dry sand complete all as specified and directed. |
| 122 | Supply and laying in trenches brick common burnt clay building brick, sub class 'B' designated- 75 with width equal to length of brick for cable protection complete. |
| 123 | Supply and fix electric water heater storage type ABS body(as directed by Engineer-In-charge) with glasslined stainless steel inner tank capacity 25 litres, heating element of 2 KW, BEE 5 star rated with all accessories such as safety valve , thermostat , NRV , SS 304 connection pipe , nut bolt with metalic anchor fasterner etc for fixing on wall & testing, complete all as specified and directed. Note: Warranty of 2 year on geyser and 07 year on geyser tank shall be submitted by the contractor. |
| 124 | S&F in replacement single pole and neutral enclouser with a two pin and earth plug and socket complete with one pole MCB 20 Amps complete all as spd and directed . |
| 125 | S&F for ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as spd and directed . |
| 126 | Supply and fix in replacement of exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers. Necessary connection like hole cutting and connecteion to existing wiring deemed to be incld in quoated rate complete all as specified and directed. |
| 127 | Supply and draw submain wiring in replacement with two single core 4 sq mm FRLSH PVC insulated copper cable 1100 volts grade multi stranded, sheathed conductor on wall surface PVC casing caping medium grade of 20-25 mm wide, with double locking type including 4 sq mm multi-strand FRLSH PVC insulated copper wire for earth continuity conductor connected to common earth dolly complete and making good disturbed surface complete all as specified and as directed.Note:- Cost of PVC casing caping on walls and making good disturbed wall surfaces matching with the existing shade / tint are deemed to be included in the rates quoted. |
| 128 | S & F sheet metal enclosure double door for MCB DBs SPN 4 way 240 V, complete flush mounted all as specified and as directed. |
| 129 | S & F MCB single pole (SP) 6 to 32 Amps, 240 volts , C curve , AC , 50 Hz ,10 kA complete all as specified and directed. |
| 130 | S & F MCB Single pole & neutral (SPN) 32-40 Amps, 240 volts , C Curve, AC , 10 kA complete all as specified and directed. |
| 131 | M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Metre below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 15 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as shown on electrical plate No. 3 of SSR part - I , including taking out old U/s complete alll as specified and directed . Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender