Tender For 8697 - Repairs To Joinery Like Doors, Windows Ventilaters And Connected Items Including Misc Work In Residential Area Under Age (I) R&D Nstl, Visakhapatnam
Tender Value
9.50 Lakhs
Estimated cost
Bid Submission
04 Aug 2026
17 days left
EMD
19000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for 8697 - Repairs To Joinery Like Doors, Windows Ventilaters And Connected Items Including Misc Work In Residential Area Under Age (I) R&D Nstl, Visakhapatnam
BOQ
| Sl. No. | Item Description |
| 1 | Taking down Chowkats or frame exc 1.5Sqm and not exc. 4Sqm each with shutters (without taking off shutters from the frames), all as specified. |
| 2 | Taking down Chowkats or frame not exc 1.5Sqm each with shutters (without taking off shutters from the frames), all as specified. |
| 3 | Taking down shutters of any description n.exc.1Sqm each, all as specified and directed by Engineer-in-charge. |
| 4 | Taking down shutters of any description exc. 1Sqm and not exc. 2Sqm each, complete all as specified and directed. |
| 5 | Taking down shutters of any description n exc 1 sq. m each including easing and adjusting and refixing the shutters in same opening including renewal of unserviceable screws, etc complete all as specified and directed |
| 6 | Taking down shutters of any description exc 1 sqm but not exc 2.00 sq. m each including easing and adjusting and refixing the shutters in same opening including renewal of unserviceable screws, etc complete all as specified and directed |
| 7 | M & L for inspecting joinery and carrying out petty repairs, easing adjusting door/window/kitchen cupboard shutters, tightening screws,adjusting and refixing hinges, tower bolts, handles, aldrops, knobs, greasing of hinges, misc minor repairs exisitng mongery to make the system functional complete as directed by Engineer In Charge |
| 8 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube complete all as specified inSSR Part-II section -8 and directed by Engineer -In-Charge. |
| 9 | S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, & S & F in the frame at site as per specification and as directed by Engineer-in-Charge. |
| 10 | S&F MS butt hinge cold rolled medium weight 100mm size |
| 11 | S&F anodised aluminium barrel tower bolt 150mm long. |
| 12 | S&F 'D' type handle aluminium anodized 125mm in size. |
| 13 | S&F Aluminium Sliding Bolt of Size 200mm |
| 14 | S&F II nd class H/W plain solid straight chowkats or frames rebated on the solid, wrought, framed rounded or chamfered put together with glue pinned at joints . |
| 15 | M&L plain framed panelled shutter 35mm thick (any number of panels) with panels of timber flat or both sides or of veneered particle board mediam density wood particle board with commercial face veneerd supplied and fitted to chowkats complete all as specified and directed |
| 16 | S&F 2nd class hardwood 35mm thick glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc divided into sauares with plain chamfered or rounded mitred and rebated sash bar all as specified in SSR Part - I section 8 clause No. 8.20 |
| 17 | S&F flush shutters 35mm thick, solid core construction, with block board core and plywood face panel, commercial type on both sides and one face covered with deocrative face venner with lipping/frame work to mach complete all as specified and directed |
| 18 | S&F MS butt hinge cold rolled medium weight 125mm size |
| 19 | S&F anodised aluminium barrel tower bolt 200mm long. |
| 20 | S&F 'D' type handle aluminium anodized 150mm in size. |
| 21 | S&F Aluminium Sliding Bolt of Size 300mm |
| 22 | S & F 300mm, ordinary rat tail rod pattern springs fixed to Steel frame or Wooden frame including roller and roller plate complete |
| 23 | S&F 2nd class hardwood 30mm thick glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc divided into sauares with plain chamfered or rounded mitred and rebated sash bar all as specified in SSR Part - I section 8 clause No. 8.20 |
| 24 | S&F MS butt hinge cold rolled medium weight 75 mm size |
| 25 | S&F anodised aluminium barrel tower bolt 125mm long. |
| 26 | S&F Aluminum Hooks & eye of size 150mm fixed to window shutter |
| 27 | Supply only Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed |
| 28 | S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in squares not exc 0.5 Sqm each pane fixed in aluminium windows/door/partions complete all as specified and directed |
| 29 | S&F 4.8 mm thick sheet glass frosted, on one side quality and glazing with oil putty/wooden beading in squares not exc 0.5 Sqm each pane fixed in aluminium windows/door/partions complete all as specified and directed |
| 30 | M&L Two coat of synthetic enamel paint over a one coat of pink primer including preparation of new or previously untreated wooden or wood base surface of any description, not otherwise described over 10cm with or girth, complete all as specified and directed by Engineer-in-charge. |
| 31 | S&F in repair 600mm x 450mm bevelled edge mirror of selected quality glass mounted on 6 mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers with aluminium frame |
| 32 | S&F in repair tubular towel rail 600mm long of PTMT fixed with & incl CP brass screws & plastic cleats min wt 170gm |
| 33 | S&F in repairs 100mm size brass mortice lock, vertical type, 4 levers, including plates and two keys, fixed in repairs, including cutting holes in existing pressed steel frames, all as specified and directed. |
| 34 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed |
| 35 | S&F in repairs 4.8 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in squares not exc 0.5 Sqm each pane fixed in aluminium windows/door/partions complete all as specified and directed |
| 36 | S&F repairs 4.8 mm thick sheet glass frosted, on one side quality and glazing with oil putty/wooden beading in squares not exc 0.5 Sqm each pane fixed in aluminium windows/door/partions complete all as specified and directed |
| 37 | S&F 50 mm micron reflective type sun control film sticked to glass panes as per manufacturer's instructions all as specified and as directed including taking down old. |
| 38 | S&F in Repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed |
| 39 | S&F in repairs anodised aluminium barrel tower bolt 150mm long. |
| 40 | S&F in repairs 'D' type handle aluminium anodized 125mm in size. |
| 41 | S&F in repairs Aluminium Sliding Bolt of Size 200mm |
| 42 | S&F in repairs anodised aluminium barrel tower bolt 200mm long. |
| 43 | S&F in repairs 'D' type handle aluminium anodized 150mm in size. |
| 44 | S&F in repairs Aluminium Sliding Bolt of Size 300mm |
| 45 | S&F in repairs anodised aluminium barrel tower bolt 125mm long. |
| 46 | S&F in repairs in repairs Aluminum Hooks of size 150mm fixed to window shutter |
| 47 | S&F in repairs for 18mm thick Veneered particle boards interior grade, solid core, general purposes type, with face veneers of type 'BB', fixed with screws to timber frame work with decorative veneer on one face |
| 48 | S&F in repairs in block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nail |
| 49 | S&F magnatic catcher for cup board shutters including necessary screwed complete all as specifie dand directed by Engineer-in-Charge all as specified and as directed |
| 50 | S&F Hasp and staple,aluminium anodised , 100mm size including bolt to hinges plate and fixed with screws |
| 51 | M&L Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete in cm 1:6 |
| 52 | S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or iveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and Hold fasts similar work con- forming to Fe.290.Gde-E-165 |
| 53 | M&L for Preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. |
| 54 | S&F Door closer, of aluminium (die cast) body, hydraulically regulated, designation No 2, universal type, suitable for door shutters of weight upto 60kg, fixed in repairs all as specified and directed |
| 55 | Removing existing grills from window and refixing the same after carrying out repairs for windows to external side of buidling |
| 56 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc. 1.5 sq.m but not exc. 4.0 sq.m each all as directed |
| 57 | M&L for uPVC factory made, white colour casement/ sliding windo Three track made of extruded profiles with wall thickness of 2.3mm (+-0.2mm). Window profile with hollow sections with multichamber. Frame (88mm x 52mm ), Sliding sash (42mm x 57 mm ) sliding mesh sash (42mm x 57 mm ) Sliding inter Lock (one verticle lengthin each shutters) 45.4 mm x 28 mm) Glazed bead (24.5 mm x 16 mm ) will be mitered cut and fusion welded at all corners including railing of holes for fixing of hardwear, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel frame (30mm x 18 mm) 2 nos, sliding sash (30 mm x 18 mm ) sliding mesh sash (26 mm x 10 mm ) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, necessary zinc alloyed (powder coated) hardware like handles etc., steel rollers system, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and required accessories and glass pane inserts of 5.5mm thick select quality sheet glass, rubber beading for fixing glass complete as directed by the Engineer-in-charge. |
| 58 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 sq.m each all as directed |
| 59 | M&L for uPVC factory made, white colour louvered ventilators made of extruded profiles with figured/ frosted glass louvers; profiles of frames and sash will be mitred cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners complete as directed by the Engineer-in-charge. |
| 60 | S&F Harrison rails but anodised aluminium alloy chromium plated with fixing brackets, stops, rollers etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender