Tender For Repair And Maintenance Of Lt Xlpe Underground Cable, Service Cables And Connected Items At Tea Point Area, Manekshaw Marg, Urban Village, Mall Road, Polo Road, Church Road, Tigris Road, Cassel Road, Station Road, Mandir Marg, Maude Road, 4
Tender Overview
Project Description
Tender for Repair And Maintenance Of Lt Xlpe Underground Cable, Service Cables And Connected Items At Tea Point Area, Manekshaw Marg, Urban Village, Mall Road, Polo Road, Church Road, Tigris Road, Cassel Road, Station Road, Mandir Marg, Maude Road, 4 No P/F, Harbaksh Stadium, Tubarak Lines, 972 Tpt Coy, Engr Offr Mess And Adjoining Area Of Age E/S Sldc Under Ge (U) Elect Supply Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Material & labour for excavation in trenches not exceeding 1.5m wide & not exceeding 1.5m in depth and n.exc 10 sqm on plan for foundations , laying of LT under ground cables/ GI pipes and steel tubular poles etc. and getting out as in soft / loose soil complete all as specified and directed by Engr-in-Charge. |
| 2 | Material & labour for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm deep as in soil complete all as specified and directed by Engr-in-Charge. |
| 3 | Material & labour for removal of excavated material n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above in starting point complete all as specified and directed by Engr-in-Charge. |
| 4 | Supply & fixing of common burnt bricks as mechanical protection of this cables using old size sub class ‘B’ bricks laid dry flat over the cable width equal to the length complete all as specified and directed by Engr-in-Charge. |
| 5 | Material & labour for sand filling in trenches for cushioning of UG cables as layers of 8 cm before laying and 15 cm after laying of cables complete all as specified and directed by Engr-in-Charge. Note : Measurement shall be taken after punning down. |
| 6 | All as per srl item No 4 here-in-before but using old bricks obtained under srl item No 01 complete all as specified and directed by Engr-in-Charge. |
| 7 | Supply, laying, jointing, testing and commissioning in replacment of LT underground cables 1100 volts grade, PVC insulated XLPE and PVC sheathed, heavy duty armoured, with multistranded aluminium conductors, IS-1554 marked, laid in trenches complete all as specified and directed by Engr-in-Charge. Cables of the following sizes:-Note Excavation, earth work ,cable protection , sand fillings , cable joint shall be measured and paid separately. |
| 8 | 16 Sqmm 4 core |
| 9 | 25 Sqmm 4 core |
| 10 | 35 Sq mm 3.5 core. |
| 11 | 50 Sq mm 3.5 core. |
| 12 | 70 Sqmm 3.5 core |
| 13 | 95 Sqmm 3.5 core |
| 14 | 120 Sqmm 3.5 core |
| 15 | 185 Sqmm 3.5 core |
| 16 | 240 Sqmm 3.5 core |
| 17 | 400 Sqmm single core |
| 18 | Supply, fixing and testing straight through joint heat shrinkable type with jointing kit suitable for cable PVC/XLPE insulated armoured heavy duty aluminium conductor 1100 Volts grade complete all as specified and directed by Engr-in-Charge. for the following sizes :- |
| 19 | 25-50 Sqmm x 3.5 core/ 4 core |
| 20 | 70-240 Sqmm x 3.5 core/4 core |
| 21 | M&L for re-painting of LT Steel tubular poles of any sizes with apply of 2 coats of aluminium paint including rubbing with wire brush/emery paper & writing pole Nos in appropriate size of letters including making yellow and black strips upto height of 1.5 mtr above from ground level complete all as specified and directed by Engr-in-Charge. |
| 22 | M&L for re-painting of LT Panels/feeder pillars of approx size 2 to 4 Sqm with 2 coats of super enamal paint over a coat of red-oxide with sparygun including writing of feeder pillar numbers in appropriate size of letters complete all as specified and directed by Engr-in-Charge. |
| 23 | Supply and Fixing of Junction box of IP67 (as per IEC 60529) Thermoplastic PC- GFS Polycarbonate Weatherproof, UV resistant due to solar radiation, Rainwater proof, temperature resistant, Flame – retardant & Self-extinguishing. Glow Wire tested at minimum 960 deg C (as per IEC 60695 – 2 – 11) Junction Box having size (205 x 255 x 112 mm) size on Pole with 1No. 10 Amp C Curve series, 10kA SP MCB i/c supply with pole mounting kit for clamping the box on pole, earthling the body connection, inter- connection, suitable terminal blocks, glands, locknut etc. complete set as reqd. for Pole lighting complete all as specified and directed by Engr-in-Charge. |
| 24 | Material & labour for boring of hole under road/pavement/hard standing or any other situation by manual means and suitable for passing of GI pipe 50 to 100 mm bore and making good both ends complete all as specified and directed by Engr-in-Charge. |
| 25 | S&F in replacement GI Pipe (light grade) with necessary accessories/ fittings for cable protections/pole for crossing of culverts/nallah of following bore sizes complete all as specified and directed by Engr-in-Charge :- |
| 26 | 50 mm |
| 27 | 80 mm Please Enable Macros to View BoQ information |
| 28 | 80 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender