Tender For Repair/ Replacement Of Old Vintage Fresh Water And Raw Water Pipe Line, Sluice Valve, Air Released Valves, Valve Chamber And Other Connected Items At Gunjkheda Pump House, Cmph, Picket Hill Pump House, Arjun Line, Map Qtr Area Area Under G
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Aug 2026
1 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Wardha → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Replacement Of Old Vintage Fresh Water And Raw Water Pipe Line, Sluice Valve, Air Released Valves, Valve Chamber And Other Connected Items At Gunjkheda Pump House, Cmph, Picket Hill Pump House, Arjun Line, Map Qtr Area Area Under Ge Pulgaon
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 04-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-Aug-2026 |
| 2 | 11-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 17-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches by mechnical means (hydraulic excavator) not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out all kind of soil complete all as specified and as directed. |
| 2 | Returning, filling in, including spreading, leveling watering and well ramming in layers of soil not exceeding 25cm. |
| 3 | Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point of rock. |
| 4 | Supply and fix cast iron in new pipes with spigot and socket ends centrifugally casted class LA in any length suitable for rubber tytan joint and Laid in trenches of size 100mm bore. At FSD area |
| 5 | Supply and fix cast iron in new pipes with spigot and socket ends centrifugally casted class LA in any length suitable for rubber tytan joint and Laid in trenches of size 200mm bore. At FSD area |
| 6 | M&L for rubber tyton joints for suitable for sockets and spigot CI pipes including rubber gasket of size 100mm bore. |
| 7 | M&L for rubber tyton joints for suitable for sockets and spigot CI pipes including rubber gasket of size 200mm bore. |
| 8 | S&F in new MS pipe 150 mm dia ligth grade A class both end flanged including making flanged joint, rubber gasket, nuts & bolts washers,nut and bolts complete all as specified and as directed.At FSD area |
| 9 | Supply only Three core 16 sqmm submersible copper cable for connection for 30HP to 60 HP submersible borewell pump etc. |
| 10 | M&L for fixing in replacement of CI non return valve heavy duty both end flanged incl making flanged joint, rubber gasket, nuts & bolts washers sizes 200 mm complete allas specified and directed. Make:Kirloskar/Upadhayaya/Leader |
| 11 | All as per item No 10 above here-in-above but 150 mm dia. |
| 12 | All as per item No 10 above here-in-above but 100 mm dia. |
| 13 | M&L for fixing in replacement of CI air release valve heavy duty single end flanged incl making flanged joint, rubber gasket, nuts & bolts washers sizes 100 mm complete allas specified and directed. Make:Kirloskar/Upadhayaya/Aarko |
| 14 | Taking out M&L for repaire of CI air release disconnected parts after replacing unserviceable parts with the new parts of same like rubber gasket, nuts & bolts washers ,ball of size sizes 100 mm/75mm, refixing including Repacking complete all as specified and directed. |
| 15 | Supply, installation, testing andcommissioning of Open well submersible pump sets 10 HP,electric driven,RPM-1450rpm, Driver rating-45KW, 415 volt,50HZ head 60 mtr, flow 3000 LPM, as directed. Make- L&T/Siemens/Schneider (CG). |
| 16 | M&L in repair of rusted & crack CI/DI water branch connection 150 to 300mm dia by using mechanical joint with connecting all accessories complete all as specified and directed byEngineer-in-Charge. Note :(i) cost of gasket and nut bolts ,washers'jointing of materials as required are inclusive in above job.ii) Required T&P for job is provided by the Contractor is deemed to be included in the item rate.(iii) Excavation for pipe is included in job Work. |
| 17 | Disconnection and removing the broken S/S spindle with checknut and S&F brass spindle of same size and length along with checknut suitable for sluice valve 300 mm bore PN 1.6/PN1 of exisisting makes including threading machining and Lathe work complete along with fixing material such as gland packing nut and bolts complete. |
| 18 | All as per item No 17 above but 200 mm bore. |
| 19 | All as per item No 17 above but 150 mm bore. |
| 20 | M&L for CI special/fittings suitable for CI flanged/socket ends pipe upto 150 to 300 mm bore dia such as bends, (any radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc) tee piece, single branch 'Y' junction, double branch, cross (all flanged), collars, caps & plug, tail pieces, reducers, mechanical joint, etc. including nuts, bolts and washers and necessary boring to match the existing pipe complete all as specified and as directed, |
| 21 | S &F of single phase preventor(Phase failure relay) 415Volt,50 Hz,Type-VSP 3 complete all as specified and directed. |
| 22 | a) Supply & fix of reputeded make full bore SCADA based Electromagnetic flowmeter, size 300mm callibrated with certificate, including all accesseries, cable length- as required, local display- manual reading, remote monitoring- reading see in mobile and laptopand also print last six month hestorical DATA/Excel formate. Enclosser panel- safty Cever Meter, UPS - To Give 3 hours battery backup. With One Year Warranty. b) Supply and installing of all fitting including CI flange addeptor and jointing matterial etc. and commisining of Meter al as directed by Engr-in -Charge. ( CMPH and PKT Hill Pump House) |
| 23 | Supply only Rubber tyre Pulley along with nut, bolts and key unit complete set suitable for 120 HP pump set |
| 24 | Taking out defective submersible (vertical) pump set of capacity upto 7.5 HP from bore well for repair by lifting GI tubing of size 50mm to 150 mm GI/CI/MS pipe from upto 220 to 250 feet depth after disconnecting electrical and pipe line connection, complete by means of chain pully block or other T&P, transporting to workshop including repair/replacement of worn out parts, servicing and ovhauling complete with oiling/greasing, lubricating the parts and reassembling and painting of submersible pumpset with motor with one coat of synthetic enamel paint after cleaning and scrupping and shifting back to borewell, lowering commissioning and testing on full load complete all as specified and directed .Note :- (i) The rate quoted for this item shall includes labour charge only for maint repair and replacement of defective/UNSV spares/accessories. Spares are to measured and paid separately under subsequengt items. (ii) Cost of other minor items/ spares such as nut, bolts, washer, gaskets,paints etc which are not covered under Sch 'A' but required for efffective functioning of the plant shall be deemed to included in this items. |
| 25 | All as per item No 24 above but 3 HP/5 HP. |
| 26 | Supply & fix SWR rope 6mm for3 HP to 10HP submersible borewell pump etc. |
| 27 | Supply & fix submersible cabe 3 core copper conductor cable 6 sq mm |
| 28 | Dismantling the motor of submersible (vertical type) pumpset of capacity 7.5HP/10HP, removing the existing burnt out winding and re-winding with PVC copper winding wire of existing gauge and weight including replacement of all insulation material, \\"O\\" rings and filling of cooling oil with oil seal and terminal lead for AC, three phase, 415Volts grade and other petty items required for making motor functional and motor reassembling and testing complete all as directed |
| 29 | All as per item No 28 above but 3 HP/5 HP. |
| 30 | Supply and fix in replacement CI Foot valve unit double flap , suitable for 200mm bore incl required nuts and bolts etc and cone set the same to the suction pipe of the pump set availble in to the sum appx hight of 14 feet below the ground level of the sump all as specified and directed. Make:Kirloskar/Upadhya/Leader . |
| 31 | All as per item No 30 above but 250 mm bore. |
| 32 | All as per item No 30 above but 150 mm bore. |
| 33 | M&L for burning out lead joint in position , including removing lead to store / stacked at site to issue under credit of 250/300mm bore CI Pipe line |
| 34 | M&L for Run lead joint of 250/300 mm bore of spigot socket pipes and fitting, including caulking properly and making joint leak proof all as directed and as specified. |
| 35 | Supply & fix in replacement champion/turner style graphite gland packing of sizes as 8/10/12/16mm thick. For motor/sluice valve. |
| 36 | M&L in repair chequered plate including cut to required size and making provision of handle made out of 6 mm plane rod,including painting with two coats of synthetic enamel paint over one coat of red oxide all as directed . |
| 37 | Taking down existing UNSV sluice valve and supply & fix new Sluice valve of 80mm bore rising spindle type (Gear type) PN-1.6 heavy duty ISI marked as per (IS-14846) with flanged ends with 02 Nos of rubber gaskets, nut bolts and washers along with SS spindle and oprating wheel of following sizes :- |
| 38 | All as per item No 37 above but100mm bore. |
| 39 | All as per item No 37 above but150mm bore. |
| 40 | All as per item No 37 above but 200mm bore. |
| 41 | All as per item No 37 above but 250mm bore. |
| 42 | All as per item No 37 above but 300mm bore. |
| 43 | Supply, installation, commissioning and testing of DOL stater fully automatic suitable for upto 10HP monoblock pump, 415 volts 3 phase, 50 Hz,10-40A including taking out of existing u/s starter as directed. Make- L&T/Siemens/Schneider (CG). |
| 44 | Supply & Fix, testing of 0.5 HP cap self priming single phase ,Drip proof adapter, anti jam winding including all acessoriese all as directed by Engr - In- Charge |
| 45 | Supply & Fix, testing of 1 HP cap induction motor, anti jam winding,Drip proof protection mechanical sealed,Elctric start 230 volt as per site requirment including all acessoriese all as directed by Engr - In- Charge |
| 46 | Supply, installation, commissioning and testing of DOL stater fully automatic suitable for upto 2HP monoblock pump, 415 volts 3 phase, 50 Hz,10-40A including taking out of existing u/s starter as directed. Make- L&T/Siemens/Schneider (CG). |
| 47 | Supply, lay, connecting, jonting and testing Reinforced concrete pipes, class NP2, laid and jointed complete with collars pressure pipe of dia 600mm |
| 48 | HDPE 80 mm dia of presure rating 2.5 Kg/Sqcm alogwith coupling socket set clamps & clips complete all as specified and directed. |
| 49 | Testing of Treated water (Drinking water) sample as per IS - 10500 including collecting of sample from the pump house and handed over it to the authoriesed NABL lab for the testing purpose all as specified and directed. |
| 50 | Testing of Raw water sample as per IS - 10500 including collecting of sample from the pump house and handed over it to the authoriesed NABL lab for the testing purpose all as specified and directed. |
| 51 | Supply only Chlorine (TCCA 90/Calcium hypochloride granules 65-75 %) suitable for disinsfection of water all as specifed and as directed by Engn-In-Charge. |
| 52 | Supply only UNI ALARTAN Inorganic polymerised liquid primary coagulant for drinking water treatment with the Appearance : clear to slight hazy liquid,Odor: Odourless , Specific gravity : 1.3300-1.3500 , pH (30% w/v) : 4.00-4.40,Melting/Freezing point : -7 °C Evaporation rate :50-75%(water), Viscocity:<50cps, Oral LD50:5000 mg/kg(Rat) all as specifed and as directed by Engn-In-Charge. |
| 53 | Supply, installation, commissioning and testing of RO Model No.100 LPH Commercial RO ,Brand : KENT 84212190including pre Filter 20\\" or as per requarement rates are included with one year AMC including supply and fixall consumable spare parts all as directed by Engineer -In Charge. |
| 54 | Material and labour in replacement for filling filter bed fine crystal clear yellow sand washed before filling complete all as specified and directed. |
| 55 | Material and labour in replacement of Unplasticiscd PVC pipes including all fittings of pressure rating 10 kgf/cm2 laid in trenches of size 40mm dia. |
| 56 | Material and labour in replacement of Unplasticiscd PVC pipes including all fittings of pressure rating 10 kgf/cm2 aid in trenches of size 50mm dia. |
| 57 | Supply of First Aid kit Complete with plastic box containing absorbent cotton wool,sterile gauze pads , bandage rolls, adhesive bandage , surgical tape, antiseptic solution, antisaptic oinment, pain relief spray, disposal gloves, scissores, thermometer, and other standard, firstaid items complete all as direccted. |
| 58 | Supply and fixing of sock treatment /water saving Chart printed in Hindi and English with pictorial instructions for treeatment of electrical sock and saving of water, casualties, laminated and mounted on hard board /Frame sutaiblefor wall mounting complete as required all as direccted by Engr - In - Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 11, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 17, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender