Tender For maintenance of Sewerage (Rewinding Of Submersible Non Clog Motor In Sps Sector-28, 38, Underpass 37 & Newly Constructed Sump Well In Sec-100 And Other Allied Work), Noida (For Two Year Maintenance)
Tender Value
71.13 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
6 days left
EMD
1.67 Lakhs
Bank guarantee accepted
Document Fee
2832
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ghaziabad → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for maintenance of Sewerage (Rewinding Of Submersible Non Clog Motor In Sps Sector-28, 38, Underpass 37 & Newly Constructed Sump Well In Sec-100 And Other Allied Work), Noida (For Two Year Maintenance)
BOQ
| Sl. No. | Item Description |
| 1 | For 75 HP Non Clog MotorMotor Rewinding with F class insulation |
| 2 | Winding thermostate 140 + 5 on/off auto cut |
| 3 | S/F Upper mechanical seal |
| 4 | S/F Lower mechanical seal |
| 5 | Cable protector |
| 6 | S/F O Ring |
| 7 | S/F Oil |
| 8 | S/F Faster set |
| 9 | S/F Profile gasket |
| 10 | S/f D.I.Impeller |
| 11 | Nilos Ring |
| 12 | Spring washer |
| 13 | Pan Head screw |
| 14 | Motor pump dismantling, assembling i/c labour charge. |
| 15 | Submersible Cable motor capacity 75 HP to 120 HP; (2 x (35Sq. mm x 4 core) + 1 x 1.5 sq. mm 4 core) |
| 16 | For 50 HP Non Clog MotorMotor Rewinding with P class insulation |
| 17 | Winding thermostate 140 5 on/off auto cut |
| 18 | S/f Lower machanical seal |
| 19 | S/f Upper machanical seal |
| 20 | Cable protector |
| 21 | S/f O Ring Set |
| 22 | S/f D.I.Impeller |
| 23 | S/f Spring washer |
| 24 | S/f R.R.Pan Head screw |
| 25 | S/f Faster set |
| 26 | S/f Profile gasket |
| 27 | S/f Oil |
| 28 | Motor pump dismantling, assembling i/c labour charge. |
| 29 | For 50 HP StarterS/F of MNX 110 amp. Contractor L&T Make |
| 30 | S/F of 125 Amp. MCCB l& T make (D-Shine Micro processor) |
| 31 | S/F timer L&T make |
| 32 | S/F of VPD make Soft Hard |
| 33 | S/F of MPD make soft Hard |
| 34 | WLC/Seal monitor, Make Pump care/kishor |
| 35 | S/F of control tranformer make electra care/Pioneer |
| 36 | S/F Winding temp. relay minilec make |
| 37 | Auto transformer suitable for 50 HP induction motor |
| 38 | For 100 HP StarterS/F of MNX 225 amp. Contractor L&T Make |
| 39 | S/F of 250 Amp. MCCB l& T make |
| 40 | S/F timer L&T make |
| 41 | S/F of VPD make Soft Hard |
| 42 | S/F of MPD make soft Hard |
| 43 | WLC/Seal monitor, Make Pump care/kishor |
| 44 | S/F of control tranformer make electra care/Pioneer |
| 45 | S/F Winding temp. relay minilec make |
| 46 | Auto transformer suitable for 100 HP induction motor |
| 47 | Rewinding & Repairing of Transformer Kirlosker make/ Equivalent make as per original winding 11/.433 K.Volt with super enameled copper wire as required gauge complete all respect as per direction of Engineer in charge . It is also include the dismantling /Refixing/Cartage from site to workshop /factory and vice versa . The old material will the property of contractor (Old material rate already deducted in AOR)250 KVA |
| 48 | 400 KVA |
| 49 | Repairing of 63 KVA transformer I/c changing of burnt coil, HT and LT coils bushing, gas kit, S/f required accessories complete with testing, dismantling and installation complete in all respect as per direction of E/I. |
| 50 | Loading, unloading, cartage from site to workshop by crane and vice versa complete in all respect as per direction of E/I. |
| 51 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. |
| 52 | 240 sqmm 3½ core |
| 53 | 70 sqmm 3½ core |
| 54 | 120 sqmm 3½ core |
| 55 | Supply and Fixing of Chain Pulley 5 Tone Capacity with 3.00 Height of lift (Inder Make) |
| 56 | Supply and Fixing of Load Chain For Extra chain lift for 5 Tone Chain pulley. |
| 57 | Supply and fixing of recess mounting round 15 to 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/Reflector and driver set complete in all respect.CAT- AAA |
| 58 | Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with xtended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect. CAT- AAA |
| 59 | S/F of 3 Pole Power Contactor AC3 70 Amp. ( MAKE- L & T. / SIEMENS / SCHNIEDER ) |
| 60 | S/F of 3 Pole Power Contactor AC3 185 Amp. ( MAKE- L & T. / SIEMENS / SCHNIEDER ) |
| 61 | S&F of 400 Amp. four pole change over switch on 50mm x 50mm x 6mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge. |
| 62 | S&F of 400 A. 415 V Heavy Duty Double Break HRC fuse type metal clad TPN complete with HRC fuse etc. on angle iron frame complete in all respect. |
| 63 | S&F of 200 A. 415 V Heavy Duty Double Break HRC fuse type metal clad TPN complete with HRC fuse etc. on angle iron frame complete in all respect. |
| 64 | Supply and laying of 3 core standered aluminium conductor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc.120 Sqmm |
| 65 | S/F battery 12 volt 25 plate exide make |
| 66 | S/F of 11 KV TPMO Relco/Azad/Rama make 9 nos. insulator of Jai shree/BHEL/Rama /Rastriya make complete in all respects as per direction of E/I. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender