Tender For Repair And Maintenance Work At Galsi Ccc Under Burdwan North Division.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
31 Jul 2026
2 days left
EMD
16500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Purba Bardhaman → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Work At Galsi Ccc Under Burdwan North Division.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work n in excavation of foundation trenches of drain or septic tank, soak well etc. in all sorts of soil including removing, spreading or stacking the spoils within a lead of 75 mtr. or as directed and including trimming the sides of trenches, leveling, dressing and ramming the bottom bailing or pumping out water etc. as required complete.a)Depth of excavation not exceeding 1500mm. |
| 2 | Depth of excavation for additional depth beyond 1500 mm, and upto 3000mm. But not requiring sharing. |
| 3 | Filling in foundation or plinth by fine sand in layer not exceeding 15 cm. as directed and consolidating same by through saturation with water and ramming complete, including the cost of supply of sand. Do by fine sand |
| 4 | Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm including watering and ramming etc layer by layer complete (Payment to be made on the basis of measurement of finished quantity of work) i)With earth obtained from exavation of foundation. |
| 5 | Single brick flat soling or picked jhama bricks including ramming and dressing bed to proper leveling and filling joint with power earth or local sand including cost of sand or earth. |
| 6 | Brick work with 1st class bricks in cement mortar (1:6) (a) In foundation and plinth |
| 7 | b)In superstructure Gr. Floor |
| 8 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. |
| 9 | 1st floor |
| 10 | 125 mm Thick brick work with 1st class bricks in cement mortar (1:4) in ground floor using approved H.B. netting in every third layer. |
| 11 | 75 mm Thick brick work with 1st class bricks in cement mortar (1:4) in ground floor using approved H.B. netting in every alternate layer. |
| 12 | Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). (When the height of a particular floor is more than 4 m. the equivalent floor ht. shall be taken as 4 m. and extra for works beyond the initial 4 m. ht. shall be allowed under 12(e) for every 4 m. or part thereof.) (Mode of measurement : Area in plan X mean height of staging upto soffit of shuttering above initial 4 m.) a)25mm. to 30mm. thick wooden shuttering. |
| 13 | In 1st floor |
| 14 | c)25mm. to 30mm. shuttering without staging in foundation. |
| 15 | d) Steel shuttering or 9 mm to 30 mm thick approved quality plyboard shuttering in any concrete .gr.floor |
| 16 | 1st floor |
| 17 | Cement concrete with graded stone ballast(40mm. Size)excludinghuttering.a)pakur variety,1:3:6 proportion |
| 18 | 1st floor |
| 19 | Ordinary cement concrete (mix 1:1:5:3) with graded stone chips (20 mm. nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes, Pakur variety. |
| 20 | In 1st floor(do) |
| 21 | Ordinary cement concrete (mix 1:2:4) with graded stone chips (20 mm. nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes Pakur variety |
| 22 | 1st floor |
| 23 | Reinforcement for reinforced concrete in all sorts of structures work including distribution bars. Stirrups binders etc. initial straightening and removal of loose rust cutting to requisite length, hooking & bending to correct shape, placing in proper position and binding with 1.6 gauge black annealed wire at every intersection, complete as per drawing and direction.Tor steel / Mild steel. SAIL/ TATA/RINL a)For works in foundation, basement and upto roof of ground floor up to 4 m. |
| 24 | 1st floor : |
| 25 | Labour for chipping of concrete surface before taking up plastering work. |
| 26 | Plaster ( to wall, floor, ceiling etc.) with sans and cement mortar including rounding off or chamfering corners as directed and racking out joints including throating, nosing and drip course, scaffolding/ staging where necessary. i) With 1:6 cement mortar : a) 15mm. thick ( Gr. Floor) |
| 27 | b)15mm. thick ( 1st floor) |
| 28 | c)20mm. thick ( Gr. Floor) |
| 29 | d)20mm. thick ( 1st floor) |
| 30 | ii)With 1:4 cement mortar : a) 10mm. thick ( Gr. Floor) for ceiling bottom of chujja, beam etc. |
| 31 | b) - do - - do - 1st floor |
| 32 | Scraping of moss, blisters etc. thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc.(Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge) |
| 33 | Stripping off worn out plaster and raking out joints of walls,ceillings etc.upto any height and in any floor including removing rubbish within a lead of 75m as directed. |
| 34 | Neat cement punning about 1.5 mm. in wall dado window sills drain etc. |
| 35 | Supplying, fitting and fixing anodized aluminum barrel / tower / socket bolt 225 mm. long & 10 mm. dia bolt of approved quality make from extruded section with conforming to I.S. 204/74 fitted and fixed with cadmium plated screws 225 mm. long & 10 mm. dia bolt. |
| 36 | Supplying, fitting and fixing anodized aluminum ‘D’typehandle of approved quality manufactured from extruded section confirming to I.S specification (I.S. 230/72) complete with contibuous plate base. 100 mm. grip x 10 mm. dia rod. |
| 37 | Supplying, fitting and fixing anodized aluminum aldrop / sliding bolt of approved quality manufactured from extruded section confirming to I.S. specification (I.S. 2681/66) complete .250 mm. long by 16 dia bolt. |
| 38 | Door stopper (Brass) |
| 39 | 125 mm. long wooden buffer block fitted and fixed complete with necessary screws teak. |
| 40 | iii) Two point nose steel handle including fitting and fixing. |
| 41 | iv) Aluminium peg stay 300 mm. long including fitting and fixing. |
| 42 | c) Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. ( in all floors for internal wall & upto 6 m height for external wall). 3 mm thick (weighing 7.4 Kg/ Sqm) |
| 43 | Supplying, fitting and fixing Godrej mortice lock (local best approved quality ) 6 lever with handle connected rods and keys crossing a with chromium plated handle. |
| 44 | Supplying, fitting and fixing Godrej mortice lock chromium plated with latch and keys 4 levers, including fitting and fixing complete |
| 45 | a) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality, including smoothening surface by sand papering etc. |
| 46 | b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality, including smoothening surface by sand papering etc |
| 47 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary. a) On timber or plastered surface with super gloss(hi-gloss) On timber or plastered surface with super gloss(hi-gloss)2 coats (any shade except white) |
| 48 | b)On steel or other metal surface with super gloss (hi-gloss) 2 coats (with any shade except white) |
| 49 | Cement washing including cleaning and smoothening surface thoroughly external surface one coat. |
| 50 | Supplying, fitting and fixing UPVC pipes A-type and fittings conforming to IS : 13592-1992 with all necessary clamps, nails, including making holes in wall, floor etc. cutting trenches in any soil, thorough masonry concrete structure etc. . UPVC pipes. i) 110 mm. dia |
| 51 | ii) Shoe - 110 mm. dia |
| 52 | iii) Tee - 110 mm dia |
| 53 | Supplying, fitting and fixing flat back urinal in white vitreous china ware of approved make in position with brass screws on 75 x 75 x 75 mm. wooden blocks complete. 470 x 280 x 340 mm. |
| 54 | Supplying, fitting and fixing orrissa pattern – water closet in white glazed vitreous china ware of approved make in position complete excluding ‘D’ or ‘S’ trap 530 x 410 mm. |
| 55 | Supplying, fitting and fixing 10 liter PVC low down cistern conforming to I.S. specification with PVC fittings complete C.I. brackets including two coats of painting to bracket etc. |
| 56 | Supplying, fitting and fixing approved brand 32 mm. dia PVC waste pipe, with PVC coupling at one end fitted with necessary clamps.900 mm. long. |
| 57 | Supplying, fitting and fixing approved brand 32 mm. dia PVC waste pipe, with PVC coupling at one end fitted with necessary clamps.750 mm. long. |
| 58 | Supplying, fitting and fixing approved brand PVC connector white flexible with both end coupling with heavy brass CP nut 15 mm. Dia . 450 mm. long. |
| 59 | Supplying, fitting and fixing white china best quality of approved make wash basin with C.I. brackets on 75 x 75 mm wooden blocks C.P.waste fittings of 32 mm. dia one of approved quality brass C.P. pillar cock of 15mm. including mending good all damages and painting the brackets with two coats of approved paints. 550 x 400 mm. size. |
| 60 | Supplying, fitting and fixing best quality Indian make mirror 5.5 mm. thick with silvering approved quality as per I.S.I. specification supported on fiber glass freme of any colour frame size 600 x 450 mm. complete in all respect as per direction of engineer-in-charge. |
| 61 | Glass shelves with aluminium guard rails size 600 x 125 mm. with 505 mm. thick glass. |
| 62 | Supplying, fitting and fixing porcelin soap tray of approved make. (i) Recessed soap tray of size 150 mm. X 150 mm. |
| 63 | Supplying, fitting and fixing allumium approved brand towel rail 25 mm. dia 450 mm. long with two brackets complete all respect as per direction of engineer-in-charge. |
| 64 | Supplying, fitting and fixing C.I. approved patent vent cowl confirming to ISS 1729 of 1970 supplied fitted and fixed in position cpmplete with load caulked jointing.100 mm. dia. |
| 65 | Supplying, fitting and fixing cast iron ‘P’ or ‘S’ trap conforming to IS 3989/1970 and 1729/1964 including lead caulked joints sand painting two coats to the exposed surface. 100 mm. ‘P’ trap. |
| 66 | Supplying, fitting and fixing C.P. stop / bib cock.i)Chromium plated bib cock short body. |
| 67 | ii)Chromium plated stop cock |
| 68 | Supplying, fitting and fixing pillar cock of approved make. a) (i) CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 69 | Supplying, fitting and fixing approved quality PVC. water storage tank with closed up with lid ( Black) Multilayer top cover 1000 liter capacity. |
| 70 | Labour for hoisting plastic water storage tank (i) upto 1500 Lt capacity |
| 71 | Supplying, fitting and fixing peets valve full way gun metal standard pattern best quality of approved brand with fittings. i)25 mm. |
| 72 | ii)40 mm. |
| 73 | Supplying, fitting and fixing shower of approved brand and make.Chromium plated round shower with revolving joint. |
| 74 | 18 mm. thick marble partition slab with chawk doongri marble square cut, both side polished with two front corners rounded and edges polished fitted and fixed complete. |
| 75 | Supplying, fitting and fixing 1st quality ceramic tiles in walls and floors to match with the existing work and 4 nos of key stones(10mm.) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc . with sand cement mortar (1:4) 20 20mm thick 2 mm thick cement slurry at back side of tiles using cement @ 2.91 kg/sqm & joint filling using white cement slurry @ .20 kg/sqm area of each tile upto 0.09 sqm coloured decorative (wall) |
| 76 | Supplying, fitting and fixing 100 mm. C.I. round gratings (heavy type) |
| 77 | Supplying, fitting and fixing pedestal of approved make for wash basin (white) |
| 78 | Supplying, profiles of required section made of aluminum alloy extrusive confirming to I.S. 733-1983 and I.S. 1285-1975 anodised film thickness and specification colour/natural) matt finished confirming I.S. 1868-1983 for fabrication of composite door, sliding & casement windows, partitios, formed of basic sections of any ISI embossed/certified make and brand as per direction of Engineer-in -charge (payment will be made on finished length of the work).A) In 10-12 micron thickness Anodizing film . a)Movable door i)Door frame (top & sides) shutter : |
| 79 | ii)Shutter top rail |
| 80 | iii)Shutter bottom rail |
| 81 | iv)Shutter lock rail |
| 82 | v)Door vertical |
| 83 | vi)Glazing clip |
| 84 | Supplying, profiles of required section made of aluminum alloy extrusive confirming to I.S. 733-1983 and I.S. 1285-1975 anodised film thickness and specification colour/natural) matt finished confirming I.S. 1868-1983 for fabrication of composite door, sliding & casement windows, partitios, formed of basic sections of any ISI embossed/certified make and brand as per direction of Engineer-in -charge (payment will be made on finished length of the work). A) 15 micron colour Anodizing (i) a) 2- track sliding windowi) Bottom frame Coloured . |
| 85 | ii) Top and side frame. |
| 86 | b) 3- track sliding windowi) Bottom frame |
| 87 | ii) Top and side frame. |
| 88 | c) Shutter for all track sliding window. i) Bottom & Top member. |
| 89 | c) Shutter for all track sliding window. ii) Style side member. |
| 90 | c) Shutter for all track sliding window. iii) Interlock member. |
| 91 | Supplying PVC rollers for sliding windows as per direction of Engineer in charge. |
| 92 | Supplying maruti lock (100mm) |
| 93 | Supplying bubble free float glass of approved make and brand. Conforming to IS:2835-1987 5mm thick clear glass . |
| 94 | 6mm thick clear glass. |
| 95 | Supplying concealed type heavy duty hydraulic double action floor spring along with top / pin set of pivots conforming to IS: 6315 or any approved make as per direction of Engineer in charge.. |
| 96 | Supplying concealed type PVC headed aluminum tower bolt for double leaf doors as per approved make. 300 mm long |
| 97 | Supplying ‘U’ shaped EPDM gasket of approved make and brand and brand as per direction of EIC. |
| 98 | Supplying T' shaped EPDM gasket of approved make and brand as per direction of EIC. |
| 99 | weather gasket / wool pile for door vertical |
| 100 | Labour charges for fabrication and installation of composite door window, partition made from anodized extended alloy aluminum sections. For the following units:- fully glazed single leaf reamless swing door made of anodised aluminium alloy extrusions fabrication after cutting to proper shape and size, drilling and aligning fitted with heavy duty hydrolic action floor spring with top pin assembly and fitted with inbuilt locking arrangement and all other necessary fittings, fixture, adhesives and joineries, cutting the glass to requisite shape and size mounting the edges for fitting the same with dry set neoprine / EPDM gasket |
| 101 | Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units (A) Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Polysulphide sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC. The rate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene / EPDM gasket, locking arrangement and rollers. i ) 2 track sliding window. |
| 102 | Applying exterior grade acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured ( matt finish ) or smooth finish acrylic exterior emulsion paint including scraping and preparation the surface thoroughly complete as per manufacturer`s specification and as per direction of the EIC. G.Fl. |
| 103 | 1st floor |
| 104 | Protective and decorative acrylic exterior emulsion paint of approved quality as per manufacturer`s specification and as per direction of EIC to be applied over acrylic primer as required. the rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer (G.Fl 2 coats) normal acrylic emulsionprimer 100% acrylic exterior emulsion paint of approved quality as per manufacturer’s specification. i)In ground floor |
| 105 | 1st floor |
| 106 | Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick). |
| 107 | Applying interior grade acrylic primer of approved quality and surface old or new surface to receive distemper / acrylic emulsion paint including scraping and preparing the surface thoroughly. Water based interior grade acrylic primer. |
| 108 | Applying acrylic emulsion paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (two coats) Luxury quality |
| 109 | Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. |
| 110 | Dismantling all types of masonry excepting cement concrete plain or reinforced. Stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m a) In ground floor including roof. |
| 111 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In groung floor including roof. (a) upto 150 mm. thick |
| 112 | Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. (a) In ground floor including roof. |
| 113 | Cleaning compound premises shrubs,plants,jungles etc by cutting and removing scted(specificpermission of Engineer-in-Charge prior to execution will be necessary)(payment to be made on area leared) |
| 114 | Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (a) For Exposed Work CPVC Pipes Class-1, SDR-11 1. 15 mm dia. |
| 115 | 2. 20 mm dia. |
| 116 | 3. 25 mm dia. |
| 117 | 4. 40 mm dia. |
| 118 | (b) For Concealed Work CPVC Pipes Class-1, SDR-11 1. 15 mm dia. |
| 119 | 2. 20 mm dia. |
| 120 | 3. 25 mm dia. |
| 121 | Reducing Socket 200 mm X 250 mm |
| 122 | Supplying, fitting and fixing of steel cutter piece up to 450 mm long with sockets .75 mm dia. |
| 123 | Supplying, fitting and fixing plug of approved make conforming to I.S. specifications.75mm dia |
| 124 | Providing and fixing of false ceiling with powder coated exposed G.I. gridsuspension system (E-Grid U-1520 or equivalent load carrying capacity with mid span deflection not xceeding 1/360 span with hanger spacing of 1200mm c/c ) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placedperpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm diaG.I. wire from purlins / soffit. 15mm thick OW Acoustic Board (Mineral Fiber Acoustic Ceiling Tiles) of approved patern and size 595mm X 595mm with NRCvalue > 0.65 should be placed in the Grid module to form a False Ceiling. All complete as per the drawing & directions of Engineer-in-charge. In ground floor.a) Acoustic False Ceiling (with 15mm thick OW Acoustic Board and E-Grid U1520). |
| 125 | Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer- ncharge.The rate includes the cost of labour, adhesive and all incidental charges thereof. In ground floor Glossy/Matt/Suede excluding surface texture or metallic lustre.(i) Thickness of laminate 1.5mm |
| 126 | Wall panelling / partition with Melamine faced 3 layered flat pressed wood particle board of approved make and brand as per direction of Engineer - in -Charge of requisite grade bonded with phenol formaldehyde synthetic resin conforming to IS: 848 - 1974 (excluding the cost of supporting frame work and teak wood battens / lipping)In Ground Floor.(A) Plain : Conforming to IS: 3087 - 1985 i) Plain : Exterior grade.a) 9 mm thick |
| 127 | b) 12 mm thick |
| 128 | c) 18 mm thick |
| 129 | Supplying solid flush type doors of commercial quality the timber frame consisting of top and bottom rails and side style of well seasoned timber 6.5 cm wide each and the entire frame fitted with 37.5 mm. wide battens places both ways in order to make the door of soild core, internal lapping gurjan or similar wood veneers using phenol formaldehyde as gluee etc. complete including fitting and fixing the shutter in position but excluding the cost of hinges and other fittings in groung floor. 32 mm thick shutters ( single leaf) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender