Tender For The Construction Of Ladakh Green House Poly Carbonated (60X24) At Frn- Sumoor Under Sdp
Tender Value
13.16 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
4 days left
EMD
26320
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Leh → Ladakh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for The Construction Of Ladakh Green House Poly Carbonated (60X24) At Frn- Sumoor Under Sdp
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 50 meter beyond 1 m from cutting edge. All kinds of soil : |
| 2 | Dry stone pitching (any thickness) excluding cost of stones. On Horizontal: |
| 3 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 4 | 15mm Cement plaster on the rough side of single or half brick wall of( 1 cement : 4 coarse sand). |
| 5 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size). |
| 6 | Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied |
| 7 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including fittings with nuts and bolts applying priming coat etc complete job. |
| 8 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including fitting with nuts and bolts applying priming coat and painting etc. complete job. 10.16.1 Hot finished welded type tubes |
| 9 | Providing and fixing white triple layer polycarbonate sheet, 16 mm thick, UV protected on both sides (90-100 microns on the top as well as at the bottom). Polycarbonate should be fixed with extra support ofaluminum beading (60 x 3 mm width), fixed with nuts and bolts withsilicon washer, and silicon sealing of gaps (if any); polycarbonatejoints should be on the metallic frame complete job |
| 10 | Providing and fixing precoated galvanised iron profile sheets (size, shape andpitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) totalcoated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excludingthe cost of purlins, rafters and trusses and including cutting to size and shapewherever required. |
| 11 | Providing and laying 200mm thick mud pushka over talboos with 5mm thick dry grass (Yakzes/spoto/dry paddy straw etc), including ramming at OMC |
| 12 | Supplying and stacking of good earth at site including royalty and carriage upto 1 km (earth measured in stacks will be reduced by 20% for payment). |
| 13 | a) Sand and aggregates.-----avg lead 20Km |
| 14 | a) Stone .-----avg lead 10 Km Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender