Tender For Maintenance Work Of Different L.I. Schemes Namely At Maicherra-Ii, Silchari, Ramnagar, S.B.C Nagar (Talukdar Para), Mizirkhil, Laxmipur, Haliadepa, Bisnupur, Ratanbari, Mandaria-I, Mandaria-Ii, Bath Khola Etc. Under B.C Nagar Rd Block Unde
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Jul 2026
0 days left
EMD
26625
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Work Of Different L.I. Schemes Namely At Maicherra-Ii, Silchari, Ramnagar, S.B.C Nagar (Talukdar Para), Mizirkhil, Laxmipur, Haliadepa, Bisnupur, Ratanbari, Mandaria-I, Mandaria-Ii, Bath Khola Etc. Under B.C Nagar Rd Block Under Water Resource Sub-Division No-I Belonia, South Tripura District During The Year 2026-27/ Maintenance Work Of Pump-Motor, Suction & Delivery Pipeline And Electrical Equipements Etc Including Other Allied Works.
BOQ
| Sl. No. | Item Description |
| 1 | Repairing of OSCO Starter including supplying and fixing of necessary spare parts as per direction of Engineer - in - Charge . Starter finger |
| 2 | Gola finger |
| 3 | CT coil |
| 4 | Magnet Coil |
| 5 | Circuit board for OSCO starter of Backlite make |
| 6 | Supplying & fitting fixing kit cut for main & sub-main swich (male & female) as per direction of the Engineer in Charge.a) 63 amps |
| 7 | b) 200 amps |
| 8 | providing and installation of copper strips of 200 amps busbar by replacing the damaged one with necessary nuts and bolts etc. as per direction of Engg. In - charge. |
| 9 | providing and fixing 200 amps busbar of size 600x450x100 mm with 4 nos copper strip of size 450x4x4 mm of approved quality |
| 10 | Supplyning and fitting fixing of selector switch on the panel board of approved quality |
| 11 | Hiring charge of welding set of single phase with operating staff andcarrying upto the site of work including loading and unloading (both way) complete as per direction of Engineer-in-charge |
| 12 | Providing & fixing heavy duty flexible PVC suction hose pipe of wall thickness of 6mm at site of work(Pankaj make) 150 mm dia |
| 13 | Supplying & fitting fixing manually operated oil immerged starter of approved qualitya) 30 Hp Osco/ BCH Make |
| 14 | Providing and fixing G.I. pipes of medim class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge.External work i. 40 mm dia. nominal bore |
| 15 | ii. 125 mm dia. Nominal bore |
| 16 | iii. 150 mm dia. Nominal bore |
| 17 | Providing & fitting, fixing of the following electrical equipmentof approved quality as per direction of Engg - in - Charge.a. Current range 200 Amps |
| 18 | b. Current range 63 Amps |
| 19 | c. AC Ammeter SMI-144, Range 0-10A |
| 20 | d. AC Voltmeter SMI-144, Range 0-400 to 0-500 |
| 21 | e.200 Amps kitcut |
| 22 | f. 63 Amps kitcut |
| 23 | g. 7/16 copper wire (ISI marked) |
| 24 | Providing & fitting fixing of following equipment of approved quality as per direction of Engg - in - Charge. a. 40 mm dia fullway valve |
| 25 | b. 150 mm dia G.I bend |
| 26 | c. 150 mm dia GI flange |
| 27 | d.150 mm dia C.I. foot valve of approved quality |
| 28 | e. 150 mm dia GI hose clamp (3 mm thick) |
| 29 | f. 125 mm dia G.I bend |
| 30 | g. 125 mm dia GI flange |
| 31 | Providing and fitting fixing C.I foot valve spare parts of 125/150 mm dia at site of work of approved quality. i. C.I foot valve weight |
| 32 | ii. C.I foot valve ring |
| 33 | iii. C.I foot valve net |
| 34 | Providing and fitting fixing C.I foot valve leather washer (6 mm thick) of heavy duty at site of work of approved quality. i. 150 mm dia foot valve washer |
| 35 | Providing and fitting fixing C.I Tail piece of approved quality at site of work. i.150 mm dia |
| 36 | Providing and fitting fixing Rubber flange washer 6 mm thick at site of work of approved quality. i. 150mm dia. Flange washer(rubber) |
| 37 | ii. 125 mm dia rubber flange washer |
| 38 | Providing & fitting fixing C.I coupling complete with nuts & bolts of approved quality. i. 150 mmφ |
| 39 | ii. 190 mmφ |
| 40 | iii. 225 mmφ |
| 41 | Providing & fitting fixing sleeve bush /long bush of various pumpsets of approved quality As per direction of Engg.- In - Charge a. Mather & plant |
| 42 | b. Kiloskar |
| 43 | c. Joyti |
| 44 | Providing & fitting fixing C.I. gland of approved quality. |
| 45 | Providing & fitting fixing coupling star bush (All Size) of approved quality.150 mm dia |
| 46 | 190 mm dia |
| 47 | 225 mm dia |
| 48 | Dismentalling of motor for vernishing, heating etc. complete in/c reinstallation and trial run for 10 hrs in two spell complete as per direction of Engineer-in-charge |
| 49 | Providing & fitting fixing ball bearing of approved quality for pump required during overhauling.i) 6310 Ball bearing (TATA /SKF) |
| 50 | ii) 6309 Ball bearing (TATA /SKF) |
| 51 | iii) 6306 Ball bearing (TATA /SKF) |
| 52 | iv) 6305 Ball bearing (TATA /SKF) |
| 53 | v) 6206 Ball bearing (TATA /SKF) |
| 54 | Providing & fitting fixing of panel board of Local Teak wood for fitting fixing of electric items, in/c 2 nos MS angle post ( size 50 X 50X 6 mm 2.80 mtr long) nuts and bolts etc. for errection of the same by 1:1.5:3 cement concrete casting (1 feet X 1 feet X 2 feet) below the ground level and painting two or more coats of synthetic enamel paint on primer as per direction of Engineer-in-Charge. Size 1.20 x 1.20 x 0.025 mtr |
| 55 | Dismantling of horizontal pump and motor of 20/25 HP from the base and carrying the pump setb to the nearest workshop for repairing the body thread of stag nut and carrying the same to the scheme and fitting fixing the pump set as before as per direction of the Engineer - in - charge. |
| 56 | Suppliying and fitting fixing of asbestos rope of best quality as per direction of Engineer - in charge |
| 57 | Supplying and greasing/applying of grease of approved quality as per direction of Engineer -in - charge. |
| 58 | Supplying and fitting fixing of pump cooling pipe of best quality as per direction of Engineer -in - charge |
| 59 | Dismentaling of pump for over hauiling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs. in two spell complete as per direction of the Engineerin-Charge. |
| 60 | Providing & fitting fixing Pump Shaft sleeve bush of approved quality.i.Cast iron (CI) |
| 61 | ii. Stainless Steel (SS) |
| 62 | Providing & fitting fixing shaft sleeve nut of approved quqlity.Cast Iron(CI) |
| 63 | Providing & fitting fixing gland nut/stag nut 100 mm long for gland of approved quality. |
| 64 | Providing & fitting fixing Pump Shaft of approved quality. |
| 65 | Providing & fitting fixing C.I. Impeller of approved quality for Horizontal pump |
| 66 | Supplying following tools for day to day maintenance of pump sets and other accessories of TAPARIA make (Hammer 500grm.Sly Wrench big size,cutting plier,screw driver,dal wrench 14x15,16x17,18x19,20x21) |
| 67 | Labour charge for removal of deposited silt clay etc. from pump house & cleaning by water jetting or any suitable method as per direction of Engg-In-Charge. |
| 68 | Labour charge for cleaning of clay,silt etc.washing of all electrical equipment of panel board by petrol or any suitable method as per direction of Engg-In-Charge. |
| 69 | Providing and filling of Transformer Oil of approved quality into well immersed star delta starter of as per direction of the Engg-In-Charge. |
| 70 | Providing and fixing C.I. Sluice Valves (with cap) complete with bolts, nuts, rubber insertion etc. Ithe tail piece if required will be paid seperately) as per CPWD specification and direction of the Engg-In-Charge. i) 100 mm dia PVC Pipe |
| 71 | ii)125 mm dia PVC Pipe |
| 72 | i) 150 mm dia PVC Pipe |
| 73 | Providing and fitting fixing MS tail piece with MS flange suitable for pipes complete as per CPWD specification & direstion of the Engg-in-charge.i) 100 mm dia PVC Pipe |
| 74 | ii)125 mm dia PVC Pipe |
| 75 | i) 150 mm dia PVC Pipe |
| 76 | Providing and fitting fixing of G.I hydrant suitable for PVC pipes as per standard specification complete as per direction of Engineer-incharge (Rate excluding the cost of NTP control valve).80X50 mm dia |
| 77 | Providing and fitting fixing of M.S shore manifold made with 3mm thick MS sheet of size one way 315 mm dia & three way 125 mm dia made with suitable flange(all end) including coating with steel primer(tailpiece if required will be paid separately) including proper alignment with pipe line & earth cutting ,backfilling complete as per direction of Engineer-in-charge. |
| 78 | Earthwork in excavation by mechanical means (hydraulic excavator)/ manual means over areas ( exceeding 30 cm in depth , 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.- All kinds of soil Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender