Tender For 1.Mw To Construction Of Fallen Boundary Wall With Grill Fencing At Makhdum Shah Daulat And Ibrahim Khan, Maner Patna (Job Work)..
Tender Value
48.33 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
17 days left
EMD
1.20 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patna → Bihar
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for 1.Mw To Construction Of Fallen Boundary Wall With Grill Fencing At Makhdum Shah Daulat And Ibrahim Khan, Maner Patna (Job Work)..
BOQ
| Sl. No. | Item Description |
| 1 | Provision for demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material outside of protected area. |
| 2 | Provision for 25 cm Dia Pilling as foundation up to a depth of 3m including with all completed. |
| 3 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand free from Dust) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 4 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars. |
| 5 | Brick work with common burnt clay F.P.S. (non modular) first class bricks in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand). |
| 6 | Provision for 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) |
| 7 | Provision for centering and shuttering including strutting, propping etc. and removal of form work for: Columns, piers, abutments, pillars, posts and struts. |
| 8 | Provision for Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 9 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10. |
| 10 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on new work. |
| 11 | Provision for installing prefabricated portable cabin of size 3.0 m × 3.0 m × 2.6 m (approx.), complete in all respects, comprising MS SHS/RHS structural frame with anti-corrosive primer and enamel/powder-coated finish; insulated floor with MS frame, 18–20 mm cement board/HDHMR board/marine plywood and 2 mm PVC vinyl flooring; 50 mm thick PUF/EPS insulated sandwich wall and roof panels with pre-painted GI sheets, flashings and weatherproof sealant; one insulated steel/PUF door with all fittings; two aluminium/uPVC sliding glazed windows with mosquito mesh; complete internal electrical installation including DB with MCB, wiring, LED light fittings, ceiling fan, switches, socket outlets, earthing and accessories; all trims, mouldings, hardware, fasteners, anchor bolts, lifting hooks, base plates, touch-up painting, loading, unloading, transportation, positioning, anchoring and commissioning, complete as per approved drawings, specifications and direction of the Engineer in-charge. |
| 12 | Provision for Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. |
| 13 | Providing and applying white cement-based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered inner wall surface to prepare the surface even and smooth complete. |
| 14 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two or more coats) over and including water thinnable priming coat with cement primer. with all complete. |
| 15 | Provision for providing and fixing plumbing work with materials etc all completed (CERA/Essco/Jaquar) under counter basin with cabinet |
| 16 | Pillar cock with auto closing |
| 17 | Water tank (1000ltr) |
| 18 | CPVC 40mm |
| 19 | Health faucet ABS body with 1 metre PVC Silver foil connection pipe |
| 20 | Floor mounted western toilet with cistern |
| 21 | Urinal flat back(M) |
| 22 | other accessories like t joint, elbow, tape etc.. |
| 23 | Urinal flat back(F) |
| 24 | 2-Way angle cock with wall flange |
| 25 | Bib cock with wall flange |
| 26 | Indian toilet with cistern |
| 27 | GST 18% (Item 15 to 26) |
| 28 | Fittings and Labour charges |
| 29 | Provision for Marine plywood door and windows with fitting fixing etc. with all complete.door of size 2.10m x 1.05m x 0.038m (thickness) = 0.084 m3 |
| 30 | ventilation of size 1m x 0.30m x 0.019m (thickness) = 0.0057 m3 |
| 31 | door of size 2.10m x 0.76m x 0.038m (thickness) = 0.061 m3 |
| 32 | Provision for purchase of R.O Plant 150 ltr /hour along with chillar for drinking water kiosk. |
| 33 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 34 | Providing and laying flamed finish Granite stone in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 35 | Provision for providing and fixing electrical work with materials etc. all completed (Anchor/Havells)Copper wiring 4mm |
| 36 | Modular Board with all accessories |
| 37 | Switches |
| 38 | Five pin Socket |
| 39 | Ceiling bulb 9W |
| 40 | LED tube light 22W |
| 41 | other necessary articles (tape ceiling rose wiring pipe etc.) |
| 42 | GST 18% (item 35 to 41) |
| 43 | Electrician charge |
| 44 | Labour charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender