Tender For Development Of A Park Near F Type Tower With Open Gym Facility And Other Miscellaneous Work At D-Type And B-Type Park
Tender Value
74.01 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
6 days left
EMD
1.48 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of A Park Near F Type Tower With Open Gym Facility And Other Miscellaneous Work At D-Type And B-Type Park
BOQ
| Sl. No. | Item Description |
| 1 | Part-A: Civil works |
| 2 | Part-A: Electrical works |
| 3 | Part-B: D type park |
| 4 | Part-C: B type park |
| 5 | Development of a park near F type tower with open gym facility (Part A) |
| 6 | Civil and Horticulture works |
| 7 | Preparation and consolidation of sub grade with power road roller of 8 to12 tonne capacity after excavating earth to an average of 22.5 cm depth,dressing to camber and consolidating with road roller including makinggood the undulations etc. and re-rolling the sub grade and disposal ofsurplus earthwith within IITG campus . |
| 8 | Excavating, supplying, stacking and filling of local earth (including royalty)by mechanical transport upto a lead of 5km also including rammingand watering of the earth in layers not exceeding 20 cm in foundationtrenches, plinth, sides of foundation etc. complete for all lift. |
| 9 | Supplying and stacking at site.90 mm to 45 mm size stone aggregate |
| 10 | Supplying and stacking at site.53 mm to 22.4 mm size stone aggregate |
| 11 | Supplying and stacking at site.Stone screening 13.2 mm nominal size (Type A) |
| 12 | Laying, spreading and compacting stone aggregate of specified sizesto WBM specifications in uniform thickness, hand picking, rollingwith 3 wheeled road/vibratory roller 8-10 tonne capacity in stages toproper grade and camber, applying and brooming requisite type ofscreening / binding material to fill up interstices of coarse aggregate,watering and compacting to the required density . |
| 13 | Providing and laying factory made chamfered edge Cement Concretepaver blocks in footpath, parks, lawns, drive ways or light traffic parkingetc, of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over 50 mmthick compacted bed of sand, compacting and proper embedding/layingof inter locking paver blocks into the sand bedding layer through vibratorycompaction by using plate vibrator, filling the joints with sand and cuttingof paver blocks as per required size and pattern, finishing and sweepingextra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-35 grade with approvedcolour design and pattern. |
| 14 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width aswell as 10 sqm on plan) including getting out and disposal of excavatedearth lead upto 50 m and for all lift, as directed by Engineer-in-charge.All kinds of soil |
| 15 | Dry brick pitching half brick thick in drains including supply of bricks andpreparing the surface complete :With common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 |
| 16 | Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-ill) derived fromnatural sources : 3 graded stone aggregate 20 mm nominalsize derived from natural sources) |
| 17 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1.5:3 (1 Cement: 1.5 coarse sand (zone-ill) derivedfrom natural sources : 3 graded stone aggregate 20 mmnominal size derived from natural sources) |
| 18 | Brick work with common burnt clay modular bricks of class designation7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 19 | Centering and shuttering including strutting, propping etc. and removalof form forFoundations, footings, bases of columns, etc. for mass concrete |
| 20 | Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D ormore. |
| 21 | Providing and laying at or near ground level factory made kerb stone ofM-25 grade cement concrete in position to the required line, level andcurvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand),including making joints with or without grooves (thickness of joints exceptat sharp curve shall not to more than 5 mm), including making drainageopening wherever required complete etc. as per direction of Engineerin-charge (length of finished kerb edging shall be measured to calculatevolume for payment). (Precast C.C. kerb stone shall be approved byEngineer-in-charge). |
| 22 | Providing and laying non-pressure NP2 class (light duty) R.C.C.pipes with collars jointed with stiff mixture of cement mortar in theproportion of 1:2 (1 cement : 2 fine sand) including testing of jointsetc. complete :150 mm dia. R.C.C. pipe |
| 23 | Providing and laying matt finished vitrified tile of size 300x300x9.8 mmhaving with water absorption less than 0.5% and conforming to IS: 15622of approved make in all colours and shades in for outdoor floors such asfootpath, court yard, multi modals location etc., laid on 20 mm thick baseof cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patternsincluding grouting the joints with white cement mixed with matchingpigments etc. complete as per direction of Engineer-in-Charge. |
| 24 | Providing and fixing stainless steel ( Grade 304) railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing, polishingand making curvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete, i/c fixing the railingwith necessary accessories & stainless steel dash fasteners , stainlesssteel bolts etc., of required size, on the top of the floor or the side of waistslab with suitable arrangement as per approval of Engineer-in-charge,(for payment purpose only weight of stainless steel members shall beconsidered excluding fixing accessories such as nuts, bolts, fastenersetc.). |
| 25 | Painting with synthetic enamel paint of approved brand and manufactureof required colour to give an even shade :Two or more coats on new work over an under coat of suitableshade with ordinary paint of approved brand and manufacture |
| 26 | Applying priming coats with primer of approved brand and manufacture,having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface havingVOC content less than 50 grams/litre |
| 27 | Clearing grass and removal of the rubbish up to a distance of 50 m outsidethe periphery of the area cleared. |
| 28 | Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mmthickness of existing ground prepared with proper level and ramming withtools wooden (Dhurmos) and than rolling the surface with light roller makethe surface smoothen and light waterning with sprinkler and maintenancefor 30 days or more till the grass establish properly, as per direction ofofficer-in-charge. |
| 29 | Providing, stacking and supplying of Cuphea chinensis of ht. 20-30 cm full of branches and healthy foliage in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. |
| 30 | Providing and supplying of Cyprus golden well shaped developed with good colored foliage fresh & healthy 60 to 75 cm ht in 30 cm Earthen Pot |
| 31 | Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal ofunserveiceable material’s as per direction of officer in charge (excludingcast of plant)Trees Plant |
| 32 | Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal ofunserveiceable material’s as per direction of officer in charge (excludingcast of plant)Hedge Plant /Ground cover |
| 33 | Supplying and stacking of well decayed cattle manure at site includingroyalty and carriage upto 5 k.m.lead complete (Cattle manure measured instacks will reduced by 8% for Payment). |
| 34 | Mixing earth and sludge or manure in the required proportion specified ordirected by the Officer-in-charge |
| 35 | Spreading of sludge, dump manure and/or good earth in required thicknessas per direction of officer-in-charge (cost of sludge, dump manure and/ orgood earth to be paid separately). |
| 36 | 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) |
| 37 | Supply and Installation of park equiments |
| 38 | Supply , instalattion of PARK BENCH including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SE-MPS-65 ( Make - Saptak Exterio )SIZE - L-4 X W-1.4 X H-3.5 FT (Drawing and specification as per Figure-12) |
| 39 | Supply , instalattion of PARK BENCH including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SE MPS 66 ( Make - Saptak Exterio )L-4 X W-1.4 X H-3.5 FT (Drawing and specification as per Figure-13) |
| 40 | Supply , instalattion of ELEPHANT DUSTIBINDBPP 003 ( Make - Saptak Exterio )W-36’’ X H-31’’ (Drawing and specification as per Figure-14) |
| 41 | Supply , instalattion of DOUBLE TWISTER SEATING including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SE GM 107 ( Make - Saptak Exterio )L-6 X W-2 X H-6 FT (Drawing and specification as per Figure-15) |
| 42 | Supply , instalattion of AIR WALKER including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SE GM 101 ( Make - Saptak Exterio )L-4.5 X W-2 X H-4.5 FT (Drawing and specification as per Figure-16) |
| 43 | Supply , instalattion of SIT UP BOARD including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SE GM 103 ( Make - Saptak Exterio )L-5 X W-2 X H-2.5 FT (Drawing and specification as per Figure-17) |
| 44 | Supply , instalattion of CROSS SKIER including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SE GM 132 ( Make - Saptak Exterio )L-5.5 X W-2.5 X H-5.5 FT (Drawing and specification as per Figure-18) |
| 45 | Supply , instalattion of LEG PRESS & TWISTER SEATED including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SE GM 144 ( Make - Saptak Exterio )L-6 X W-1.5 X H-6 FT (Drawing and specification as per Figure-19) |
| 46 | Supply , instalattion of SKY WALKER DOUBLE including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SE GM 135 ( Make - Saptak Exterio )L-4 X W-3 X H-6 FT (Drawing and specification as per Figure-20) |
| 47 | Supply , instalattion of BACK EXTENSION including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SE GM 115 ( Make - Saptak Exterio )L-4 X W-2.5 X H-2 FT (Drawing and specification as per Figure-21) |
| 48 | Supply , instalattion of UN EVEN BAR including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SE GM 116 ( Make - Saptak Exterio )L-11.5 X W-4 X H-7.5 FT (Drawing and specification as per Figure-22) |
| 49 | Supply , instalattion of WEIGHT LIFT including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SE GM 118 ( Make - Saptak Exterio )L-4 X W-1.5 X H-7.5 FT (Drawing and specification as per Figure-23) |
| 50 | Supply , instalattion of PUSH UP BARS including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SE GM 120 ( Make - Saptak Exterio )L-2 X W-4 X H-6 FT (Drawing and specification as per Figure-24) |
| 51 | Supply , instalattion of CHEST PRESS & SEATED PULLER DOUBLE including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SE GM 139 ( Make - Saptak Exterio )L-4 X W-2 X H-6 FT (Drawing and specification as per Figure-25) |
| 52 | Supply , instalattion of SHOULDER DOUBLE including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SE GM 129 ( Make - Saptak Exterio )L-4 X W-2 X H-5 FT (Drawing and specification as per Figure-26) |
| 53 | Supply , instalattion of CYCLE including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SE GM 131 ( Make - Saptak Exterio )L-4 X W-2 X H-6 FT (Drawing and specification as per Figure-27) |
| 54 | Supply , instalattion of LEG EXTENSION including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SE GM 136 ( Make - Saptak Exterio )L-5.5 X W-2.5 X H-5.5 FT (Drawing and specification as per Figure-28) |
| 55 | Part-A: Electrical works of open Green Area of F type tower |
| 56 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, Protective covering and refilling the trench etc as required |
| 57 | Upto 35 sqmm |
| 58 | Erection of metallic pole of following length in cement concrete 1:3:6 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) foundation including plastering, painting, excavation and refilling etc as required |
| 59 | b) Above 8 mtr and upto 10 mtr |
| 60 | Supplying and fixing 5A to 32A rating, 240/415V, 10KA, \\"C\\" curve miniature circuit breaker suitable for inductive load of following poles in the existing DB complete with connections, testing and commissioning etc. as required |
| 61 | Single pole |
| 62 | Installation, Testing and commissioning of prewired LED recess type light fittings of all accessories including connection with 4 sq.mm FRLS PVC insulated copper conductor single core cable earthing as required for Flood lights |
| 63 | Supplying and fixing DP sheet steel enclosure on surface/recess along with 25/32A,240V \\"C\\" Curve DP MCB complete with connections, testing and commissioning, etc. as required |
| 64 | Supply of following types of voltage grade upto 1100V PVE insulated round sheathed unarmored multicore cable make polycab/KEI/Finolex/RRKabel/Havells or equivalent |
| 65 | i) 3C, 2.5 sq.mm cable |
| 66 | Supply of following types and sizes of 1.1 KV grade PVC/XLPE insulated aluminium conductor armoured underground cable make Havells/RR kabel/KEI/Finolex |
| 67 | i) 4Cx 6 sq.mm cable |
| 68 | Supply of Hot Dip galvanised single arm bracket having 100mm long with 48.3mm OD pipe for installation of roadway lighting luminaries as required |
| 69 | Supply,Installation, testing & commissioning of steel 9mtr GI octagonal pole-Top dia-70mm, Bottom Dia-155mm, section-1 (section length-7000mm) Thick-3mm. Base plate-260mm x260mm x16mm. Hole in pole at a height of 300mm above the planting depth with single arem bracket 1 mtr long with 33.7mm OD GI pipe and coated with two coats of black bituminous paint through out internally and externally upto the planting depth and the remaining portion above ground shall be painted with two coat of aluminum painting over one coat of red oxide primer and individual spike earthing with 8 SWG wire inclusive of civil foundation work. Foundation Bolt-M24x 750mm (4Nos) |
| 70 | Single arm (9 mtr) |
| 71 | supply and installation of 90w LED street lights as per approved brands.(Approved make-Syska /Phillips /Havells/CG/Bajaj |
| 72 | Supply of 150 Watt LED Flood lights of approved brands Phillips/Crompton/Havells |
| 73 | Supply and installation of SMC junction box of sizes 295mmx195mmx100mm ( Make Sintex/ Hansel |
| 74 | Part-B: Miscellaneous work at D-type park |
| 75 | Civil and Horticulture works and park equipment |
| 76 | Excavating, supplying, stacking and filling of local earth (including royalty)by mechanical transport upto a lead of 5km also including rammingand watering of the earth in layers not exceeding 20 cm in foundationtrenches, plinth, sides of foundation etc. complete for all lift.charge. |
| 77 | Brick work with common burnt clay modular bricks of class designation7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 78 | 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) |
| 79 | Providing & laying Selection no. 1 doob grass turf with earth 50mm to60mm thickness of existing ground prepared with proper level and rammingwith required tools wooden and than rolling the surface with light rollermake the surface smoothen and light watering the same maintenance for30 days or more till the grass establish properly,as per direction of officerin charge |
| 80 | Supply , instalattion of PARK BENCH including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SE-MPS-65 ( Make - Saptak Exterio )SIZE - L-4 X W-1.4 X H-3.5 FT (Drawing and specification as per Figure-1) |
| 81 | Supply , instalattion of PARK BENCH including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SE MPS 66 ( Make - Saptak Exterio )L-4 X W-1.4 X H-3.5 FT (Drawing and specification as per Figure-2) |
| 82 | Supply , instalattion of ELEPHANT DUSTIBINDBPP 003 ( Make - Saptak Exterio )W-36’’ X H-31’’ (Drawing and specification as per Figure-3) |
| 83 | Supply , instalattion of MULTIPLAY STATION including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SE MPS – 02 ( Make - Saptak Exterio )L – 24 X W – 8.7 X H – 12FT (Drawing and specification as per Figure-4) |
| 84 | Supply , instalattion of DOUBLE SLIDES including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SE PS – 24 ( Make - Saptak Exterio )L – 12 X W – 3.7 X H – 8FT (Drawing and specification as per Figure-5) |
| 85 | Supply , instalattion of ATO B CLIMBERS including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SE PS – 2225 ( Make - Saptak Exterio )L – 11.5 X W – 4.5 X H – 7FT (Drawing and specification as per Figure-6) |
| 86 | Supply , instalattion of CIRCLE SWING including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SE MPS – 44 ( Make - Saptak Exterio )L – 7 X W – 5.5 X H – 7FT (Drawing and specification as per Figure-8) |
| 87 | Supply , instalattion of TRIPLE SWING including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SSE MPS – 49 ( Make - Saptak Exterio )L – 8 X W – 8 X H – 2.2 FT (Drawing and specification as per Figure-10) |
| 88 | Supply , instalattion of TRIPLE SWING including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SSE MPS – 51 ( Make - Saptak Exterio )L – 5 FT DIA (Drawing and specification as per Figure-11) |
| 89 | Supply , instalattion of TRIPLE SWING including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SE MPS – 45 ( Make - Saptak Exterio )L – 11 X W – 4 X H – 7.5FT (Drawing and specification as per Figure-9) |
| 90 | Demolishing R.C.C. work by mechanical means and stockpiling atdesignated locations and disposal of dismantled materials up to a lead of1 kilometre, stacking serviceable and unserviceable material separatelyincluding cutting reinforcement bars. (old park equipment foundations) |
| 91 | Dismantling steel work in built up sections in angles, tees, flats andchannels including all gusset plates, bolts, nuts, cutting rivets, weldingetc. including dismembering and stacking within IITG campus. (old park equipments) |
| 92 | Dismantling barbed wire or flexible wire rope in fencing including makingrolls and stacking within IITG campus. |
| 93 | Providing and fixing G.I. chain link fabric fencing of required width in meshsize 25x25 mm made of G.I. wire of dia 3 mm including strengthening with2 mm dia wire or nuts, bolts and washers as required complete as per thedirection of Engineer-in-charge. |
| 94 | Structural steel work riveted, bolted or welded in built up sections, trussesand framed work, including cutting, hoisting, fixing in position and applyinga priming coat of approved steel primer all complete. |
| 95 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1.5:3 (1 Cement: 1.5 coarse sand (zone-ill) derivedfrom natural sources : 3 graded stone aggregate 20 mmnominal size derived from natural sources) |
| 96 | Centering and shuttering including strutting, propping etc. and removalof form forFoundations, footings, bases of columns, etc. for mass concrete |
| 97 | Painting with aluminium paint of approved brand and manufacture to givean even shade .Two or more coats on new work |
| 98 | Applying priming coat:With ready mixed red oxide zinc chromate primer of approvedbrand and manufacture on steel galvanised iron/ steel works |
| 99 | Part-C: Miscellaneous work at B-type park |
| 100 | Installation of new park equipment |
| 101 | Supply , instalattion of PARK BENCH including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SE-MPS-65 ( Make - Saptak Exterio )SIZE - L-4 X W-1.4 X H-3.5 FT (Drawing and specification as per Figure-1) |
| 102 | Supply , instalattion of PARK BENCH including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SE MPS 66 ( Make - Saptak Exterio )L-4 X W-1.4 X H-3.5 FT (Drawing and specification as per Figure-2) |
| 103 | Supply , instalattion of ELEPHANT DUSTIBINDBPP 003 ( Make - Saptak Exterio )W-36’’ X H-31’’ (Drawing and specification as per Figure-3) |
| 104 | Supply , instalattion of MULTIPLAY STATION including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SE MPS – 02 ( Make - Saptak Exterio )L – 24 X W – 8.7 X H – 12FT (Drawing and specification as per Figure-4) |
| 105 | Supply , instalattion of DOUBLE SLIDES including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SE PS – 24 ( Make - Saptak Exterio )L – 12 X W – 3.7 X H – 8FT (Drawing and specification as per Figure-5) |
| 106 | Supply , instalattion of ATO B CLIMBERS including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SE PS – 2225 ( Make - Saptak Exterio )L – 11.5 X W – 4.5 X H – 7FT (Drawing and specification as per Figure-6) |
| 107 | Supply , instalattion of CIRCLE SWING including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SE MPS – 44 ( Make - Saptak Exterio )L – 7 X W – 5.5 X H – 7FT (Drawing and specification as per Figure-8) |
| 108 | Supply , instalattion of TRIPLE SWING including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SSE MPS – 49 ( Make - Saptak Exterio )L – 8 X W – 8 X H – 2.2 FT (Drawing and specification as per Figure-10) |
| 109 | Supply , instalattion of TRIPLE SWING including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SSE MPS – 51 ( Make - Saptak Exterio )L – 5 FT DIA (Drawing and specification as per Figure-11) |
| 110 | Supply , instalattion of TRIPLE SWING including excavation , concreting , shuttering , reinforcement for foundation etc. as per design complete as directed as per Drawing & specifications. SE MPS – 45 ( Make - Saptak Exterio )L – 11 X W – 4 X H – 7.5FT (Drawing and specification as per Figure-9) |
| 111 | Demolishing R.C.C. work by mechanical means and stockpiling atdesignated locations and disposal of dismantled materials up to a lead of1 kilometre, stacking serviceable and unserviceable material separatelyincluding cutting reinforcement bars. (old park equipment foundations) |
| 112 | Dismantling steel work in built up sections in angles, tees, flats andchannels including all gusset plates, bolts, nuts, cutting rivets, weldingetc. including dismembering and stacking within IITG campus. (old park equipments) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender