Tender For Comprehensive Maintenance With Various B/R Services For Otm & Process Bldg At Tech Area Of Hemrl Under Ge(I) R&D Pashan, Pune
Tender Value
Ref. Documents
Estimated cost
Bid Submission
04 Aug 2026
18 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance With Various B/R Services For Otm & Process Bldg At Tech Area Of Hemrl Under Ge(I) R&D Pashan, Pune
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 2 | Dismantling fencing wire mesh, any type complete all as specified and directed. |
| 3 | Material and labour for MS angle posts, struts in fencing including cutting to shape as directed and drilling holes, notching for wire etc, flat iron fillets, bolts etc including all necessary drilling, bolting, riveting, welding etc and similar work conforming to Fe 290-) or grade E-165 complete all as specified and directed. |
| 4 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. |
| 5 | Supply only Chain link MS galvanised fencing, any size or type complete all as specified and directed. |
| 6 | Material and labour for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm and n. exc 10cm long complete all as specified and directed. |
| 7 | Excavation in trenches; not exc 1.50 m depth and n. exc1.50m wide for foundation & getting out in soft/loose of soil complete all as specified and directed. |
| 8 | Returning filling including spreading, leveling watering and well ramming in layers n.exc 25 cm thick in soft/loose of soil complete all as specified and directed. |
| 9 | Removing excavated material in soft/disintegrated rock exc 250m & not exc 500m and depositing where directed at a level n. exc 1.50m above starting point complete all as specified and directed. |
| 10 | Material and labour for PCC (1:4:8) type C-2 using 40 mm graded stone agg as in foundation filling mass concrete complete all as specified and directed. |
| 11 | Material and labour for Applying a coat of hot blown bitumen 85/25 grade @1.2 Kg/Sqm over the old membrane and finally applying two coats of aluminium paint @ 0.10 ltrs/Sqm as directed by Engineer In Charge. |
| 12 | Material and labour for dismantling and taking out existing strip type lightening arrestor and refixing the same in position with fixtures and fittings and making good disturbed portion on roof surfaces complete all as specified and directed. |
| 13 | Dismantling stone slabs and tiles incl old bedded and pointed in any type of mortar any thickness and any description complete all as specified and directed. |
| 14 | Material and labour for grit cushioning below interlocking paver block incl spreading and levelling complete all as specified and directed. |
| 15 | Material and labour for Machine pressed precast rubber moulded concrete coloured interlocking paver block any shape and size confirming to IS 15468-2006 of 80 mm thickness with grey cement and pigment M-35 Grade complete all as specified and directed. |
| 16 | Material and labour for Granite slab 20mm thick machine cut,in cooking platform laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types as in urinal partition etc all as directed by Engineer-in-Charge. |
| 17 | Material and labour for Rounding to edges of Granite slab 20 mm on one edge, such as in, cills, cooking platform,etc and other similar situations all as directed. |
| 18 | Material and labour for machine cut kota stone slab flooring 18-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing including 15mm of screed bed in CM 1:6.complete all as specified and directed. |
| 19 | Material and labour for Mirror polishing on marble / granite / Kota stone / stone work where ever required to give high gloss finish complete all as specified and directed. |
| 20 | Material and labour, factory made precast chequered cement concrete tiles, size 30cmx30cmx22 to 25mm, hydraulically pressed, different colours, glossy finished, set jointed in neat cement slurry and pointed with white cement and coloured pigment to match the surface including 20mm thick screed bed, in CM (1:6) , complete all as specified and directed. |
| 21 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and directed |
| 22 | Material and labour for 450x300 x7 mm thick glazed ceramic coloured tiles as in vertical sufaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles and incliding 10mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 23 | Material and labour for Non- skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles and incliding 15mm thick screed in CM 1:6 complete all as specified and directed. |
| 24 | Material and labour for Double charged vitrified ceramic light shade tiles 8 to 9 mm thick (square/Rectangular) polished, area of each tiles exceeding 0.18 sqm but not exc 1.00 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc including and over 15mm thick screed bed CM 1:6 laying floor finishes etc complete all as specified and directed. |
| 25 | Material and labour for double charge Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, as in skirtings, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including rendering 10 mm thick in cement mortar 1 :3 as backing coat, Complete all as specified and as directed by Engineer-in-Charge. |
| 26 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 27 | Material and labour for providing cement concrete (1:3:6) type C1 for filling in pressed steel frames and other similar items etc complete all as specified and directed. |
| 28 | Material and labour for 75mm thick cement concrete type C-1, 1:3:6 using 20mm graded aggregate as in plinth protection all as specified. |
| 29 | Material and labour for cement concrete type B -1, 1:2:4 (20mm graded aggregate) 100 mm thick as in hardstanding complete all as specified and directed. |
| 30 | Mateial and labour for forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade `A' th of slab 100mm complete all as specified and directed. |
| 31 | Material and labour for 75 mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate) filling sub base as in floors, sub floor etc all as specified and directed. |
| 32 | Material and labour for 25mm thick cement concrete flooring type B0, 1:2:4 using 12.5 mm graded aggregate finished even and fair complete all as specified and directed. |
| 33 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 34 | Material and labour for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall,gutter, fixed with self tapping screws complete all as specified and directed. |
| 35 | Supply and fix pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 36 | Demolition of brick work/stone masonry/ PCC block masonry built in cement mortar or cement lime mortar including all quoins, pillars, arches etc, but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed. |
| 37 | Material and labour for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 with old size bricks, complete all as specified and directed. |
| 38 | Material and labour for Precast cement concrete block masonry exceeding 10 cm in width with solid block of PCC(1:3:6) type C1 and setting in CM 1:6 complete all as specified and directed. |
| 39 | Material and labour for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed. |
| 40 | Material and labour for walling of random rubble, brought upto course, well bonded, bedded and solidly hearted, built in CM (1:6) but except stone incl removing mortar and cleaning the stone, stacking for measurement and removal and disposing of debris etc complete all as specified and directed. |
| 41 | Extra over stone walling for hammer dressing to face stones and dressing or face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses with maximum depression 20 mm on face from straight edge held against the dressed surface n exc. Granite or Trap Stone complete all as specified and directed. |
| 42 | Material and labour for keyed pointing to random rubble, uncoursed or brought upto courses in CM 1:3 complete all as specified and directed. |
| 43 | Taking down rolling shutter any type including top covers complete of sizes of Shutter area upto 15 Sqm complete all as specified and directed. |
| 44 | Taking down steel collapsible gate of any type and Area of gate n.exc 10 Sqm complete all as specified and directed. |
| 45 | Supply and fix Roof trusses (framed), trussed, purlins, post, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, hollow sction tubes, channel or flat sections) including distance pieces, cleats Fe-410 W (Gde-E-250) quality A complete all as specified and directed. |
| 46 | Supply and fix Mild Steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other coveringin Fe 410-W (Gde- E- 250) quality-A . Doors, etc. to be prepared for hanging or sliding with and including either hooks and pintle hinge or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; incl errection and fabrication also fastening and fixing complete all as specified and directed. |
| 47 | Supplied and fixed Steel rolling shutters, Thickness of laths in 1. mm with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, gear operated type with bevel gear box and crank handle.complete all as specified and directed. |
| 48 | Supply and fix collapsible steel gates top hung consisting of channel pickets, pivoted flat bars top and bottom runners brass handles etc as specified erected in position and securing runners with holdfasts and brackets complete all as specified and directed. |
| 49 | Taking down chowkhats / frame incl shutterrs or Steel windows / ventilators incl shutterrs (without taking off shutters from the frame) any type and size complete all as specified and directed. |
| 50 | Taking down shutter of size exceeding 1 Sqm but not exceeding 4 Sqm each complete all as specified and directed |
| 51 | Material and labour for Aluminium Powder coating section for door frames and shutters/partition etc including joining cleat, mullion, grills etc. sliding/openable type complete of standard sections all as specified and as directed by E-in charge. (Aluminium section shall be of make Jindal/Hindalco/ Indalco). |
| 52 | Material and labour for 35 mm flush door shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides face is covered with decorative face veneers with lipping/frame to match complete all as specified and directed. |
| 53 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick sorrounds, glazed with oil putty or fixed with beads complete all as specified and directed. |
| 54 | Rough cast wired glass n exc 0.5 sqm, 6.4mm thick and glazing with oil putty in square complete all as specified and directed. |
| 55 | Supply and fix 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square in exc 0.5 sq.m in each pane complete all as specified and directed. |
| 56 | Supply and fix Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 57 | Material and labour for one coat of synthetic enamel paint on old painted surfaces of wood and wood based materials over 10 cm width or girth including preparation complete all as specified and directed. |
| 58 | Preparation of new or previosly untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 59 | Taking down and refixing in same position Shutters of any description exceeding 1 sqm but not exceeding 2sqm each, including easing and repair works, complete all as specified and directed. |
| 60 | Supply and fix factory made Soild PVC Door frame of size 50 mm x 47 mm made out of 5 mm palin colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing complete all as specified and directed |
| 61 | Supply and fix Factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed |
| 62 | Supply and fix Mild steel flat iron as in hold fasts or similar small articles conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 63 | Supply and fix 300mm long aluminum alloy anodised sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section.complete all as specified and directed. |
| 64 | Supply and fix extruded aluminium alloy handles, fabricated type anodised 150 mm size.complete all as specified and directed. |
| 65 | Supply and fix 150 mm long aluminium anodised barrel tower bolts of extruded section.complete all as specified and directed. |
| 66 | Taking down cement plaster on brick or stone walls or concrete surfaces etc incld raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 67 | Rendering 15mm thick in two layers on fair faces of brick work or concrete surfaces 10mm in CM 1:6 and top layer in CM 1:4 mixed with integral water proofing compound finished as sand plaster complete all as specified and directed. (WPC shall be measured and paid separately) |
| 68 | Rendering 15 mm thick in CM 1:6 on internal surfaces of brick wall finished even and smooth without using extra cement complete all as specified and directed. |
| 69 | Material and labour for 5 mm thick plastering in CM 1:3 on ceiling or concretesurface and finished even and smooth without using extra cement complete all as specified and directed. |
| 70 | Material and Labour for preparation of newly plastered ceiling surface and applying three coats of white wash, complete all as specified and directed. |
| 71 | Material and labour for preparation of newly plastered wall surface and applying two coats oil bound distemper a coat of 3mm thcik wall interior wall care putty and a coat of primer complete all as specified and directed. |
| 72 | Material and labour for preparation of newly plastered wall surface and applying two coats of acryalic weather proof exterior emulsion paint over a coat of 3mm thick exterior wall care putty and a exterior parimer on wall complete all as specified and directed. |
| 73 | Material and labour for preparation of old ceiling surfaces and applying two coats of white wash complete all as specified and directed. |
| 74 | Material and labour for preparation of old painted steel surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 75 | Material and labour for complete removal of existing treatment of Surfaces of any description wood, steel, iron, concrete, brick, stone, etc including preparation and applying of two coat of fire resistance paint over and including a coat of primer complete all as specified and directed. |
| 76 | Complete removal of existing Roof treatment in any layers including demolition of PCC in roofs unreinforced and disposal of debris to distance exc 250 metre and not exc 500 metre out of MoD land complete all as specified. Note: (i) The rates are inclusive of removal for any type old water proofing treatment over to Main RCC slab. (ii) All the dismantled debris are required to be removed from HEMRL premises right after demolition so that process of user should not get obstructed. |
| 77 | Material and labour for PCC 1:2:4 (Type B0 using 12.5 mm graded crushed stone aggregate) (40mm thick avg) as in levelling course to match the undulations of roof and in coving, roof kerbs including benching etc including necessary formwork and finished rough surface complete all as specified and directed. |
| 78 | Material and labour for PCC 1:2:4 type B1 (using 20 mm graded aggregate) as in benching,coping,kerbs and the likes including weathering slightly rounded or chamfered angles and throating as directed including necessary use and waste of form work complete all as specified and directed. |
| 79 | Material and labour for rendering of 10 mm thick in cement mortar 1:3 mixed with liquid water proofing compound (ISI marked) of approved make as per manufacturer's instructions over RCC roof slab and finished fair and even without using extra cement complete all as specified and directed.(Liquid water proofing compound shall be measured and paid seperately as 'Supply only'.) |
| 80 | Supply and fix 3mm thick APP Pre-fabricated membrane with non woven polyester matt central core of 160 gsm (min) impregnated and coated on both side layer of APP modified bitumen and finished with micro-perforated heat fusible poluthene film on both surfaces over 0.3 ltrs/Sqm bituminous primer confirming to IS--3384. The weight of APP membrane shall not less than3.0 kg/Sqm and laid over primed surface by using torch and aply uniform preserve with roller. The overlap of membrane shall be 100mm on sides and 150mm on end laps. Applying a coat of hot blown bitumen 85/25 grade @1.2Kg/Sqm over the membrane and finally applying two coats of aluminium paint @ 0.10 ltrs/Sqm as directed by Engr in ChargeNote:-(i) The work should be executed through authorised applicator only. Approval of which shall be taken from GE before commencement of work.(ii) The contractor has to furnish guarantee for 10 years for APP membrane. |
| 81 | Supply only integral liquid WPC of approved make. |
| 82 | Supply and Fix in repair 20mm gun metal gate valves with iron wheel head, screwed both ends for iron pipe and fixed in reapairs complete all as specified and directed. |
| 83 | Supply & Fix in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Min wt 210 grams) complete all as specified and directed. |
| 84 | Taking up or down 15 mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed |
| 85 | Supply and Fix 15mm bore Tubes Medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed. |
| 86 | Fixing only tubes of 15mm bore any grade (medium) to walls and ceilings or laying in floors complete all as specified and directed. |
| 87 | Taking up or down 20 mm dia steel tubing and connections, including cleaning for refixing or removal to store .complete all as specified and directed |
| 88 | Fixing only tubes of 20 mm bore any grade,(medium) to walls and ceilings or laying in floors complete. |
| 89 | Supply and Fix 20 mm bore Tubes Medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed. |
| 90 | Dismentaling water tanks exceeding 250 liters and not exceeding 500 litres complete all as specified and directed |
| 91 | Dismentaling water tanks exceeding 500 but not exceeding 1000 litres complete all as specified and directed |
| 92 | Supply and fix 500 Litres ISI embosed Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 93 | Supply and fix 1000 Litres ISI embosed Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed. |
| 94 | Disconnecting existing tanks capacity of tank exc. 250 ltr and n. exc 500 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed. |
| 95 | Disconnecting existing tanks capacity of tank exc.500 ltr and n. exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed. |
| 96 | Taking down eaves gutters and rainwater pipes,PVC (SWR) pipes ( any size or pattern ) including all fittings heads, shoes, bends, and removal to store complete all as specified and directed. |
| 97 | Supply and fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary scaffolding upto the height of building from ground level complete all as specified and directed. |
| 98 | Supply and fix 110 mm dia PVC (SWR) bend complete all as specified and directed. |
| 99 | Supply and Fix in repairs Vitreous China wash basin, white, flat back, size 580x450mm including brackets, including cutting for and pinning in ends of brackets or erecting stand and including 32mm bore waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed. |
| 100 | Supply and fix in repair long body 15mm bore chromium plated Bib taps, cast copper alloy fancy type, screwed down, screwed for iron pipe or for brass ferrule (minimum weight 550 grams) complete all as specified and directed |
| 101 | Supply and Fix in repair 15mm bore fancy type long(swan) neck Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed (Min wt 650 grams) complete all as specified and directed. |
| 102 | Supply and Fix in repair soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 103 | Supply and Fix in repairs brass chromium plated tabular towel rail 20mm dia complete all as specified and directed. |
| 104 | Supply and Fix in repairs angular stop cock copper alloy, screwed down, high pressure, screwed both ends fancy type chromium plated for 15mm bore Min wt 400 grams complete all as specified and directed. |
| 105 | Supply and Fix in repair Vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) add fixed in repairs including pan cover complete all as specified and directed. |
| 106 | Supply and Fix in repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and P or S trap connection to trap and to flushing pipe front or back inlet including, trap and taking out old WC & connections etc complete all as specified and directed. |
| 107 | Supply and fix in repair 10 ltr capacity low level PVC valveless, syphonic action type flushing cistern(dual system), white, with inlet, ball valve, flush pipe, PVC connection 15 mm dia and 450 mm long float and handle including bracket complete all as specified and directed. |
| 108 | Supply and Fix in repairs PVC connection pipe 15mm dia and 450mm long.complete all as specified and directed |
| 109 | Supply and Fix in repairs 40 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm ² fixed complete to walls, ceilings or in floors etc. including all pipe fittings. complete all as specified and directed |
| 110 | Supply and fix 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed. |
| 111 | Supply and fix 32mm bore waste coupling of PTMT (half or full threaded) Minimum weight 32 mm, 45gms, suitable for vitreous china wash basin complete all as specified and directed |
| 112 | Supply and fix in repairs bathroom mirror 450mm x 600mm bevelled edge mirror of selected quality glass mounted on 6mm thick PVC board and fixing with plastic plugs by means of brass srcews etc complete all as specified and directed. |
| 113 | Supply and fix in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with and including chromium plated bracket guard and railing 60cm long complete all as specified and directed |
| 114 | Supply and fix in repairs swivel shower chromium plated with shower arm 15 mm size, 195 mm long with bend of 45º with flange fixed to 15 mm dia GI tubing, shower roses with or without swivel joints ,125mm size ,including fixing to steel pipe or union complete all as specified and directed |
| 115 | Supply and fix in repairs toilet paper holder of chromium plated fixed to walls with and including chromium plated brass screws complete all as specified and directed. |
| 116 | Supply and fix in repairs 1.2metre long chromium plated health foucet including holder fixed to wall complete all as specified and directed. |
| 117 | Supply and fix in repairs plastic water closet seat cover, white colour, soft closing type, with and including mild steel chromium plated or aluminium hinging device complete all as specified and directed. |
| 118 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 119 | Providing & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with Fine Fissured (Bevelled Tegular) Edge Tiles With Armstrong 15mmExposed GRID. The tiles should have Humidity Resistance (RH) of 99%, NRC 0.6, Light Reflectance ≥85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 16mm , suitable for Green Building application, with Recycled content of 31%. The tile shall be laid on ArmstrongSuprafine 32 with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 7.5 Kgs/M2 & minimum pull out strength of 100 Kgs. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system complete all as specified and directed. |
| 120 | Demolition and breaking up drain pipes (salt glazedwere/AC/RCC ) set in CM,dia of pipe 150 mm dia complete all as specified and directed. |
| 121 | Material and labour for PCC (1 : 3: 6 ) type D2(using 40 mm graded aggregate) as in bed to drain pipe including packing under & haunching against the sides of pipes of 150 mm dia after they are laid tested. Note: Thickness of bed below pipe shall be 10cm and width shall be outer dia of pipe plus 30cm. |
| 122 | Material and labour for reinforced concrete pipes, class NP2, laid and jointed complete with collars of dia 150 mm complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender