Tender For Provision Of Wall Panelling And Ceiling Of Scientist Hostel & Provision Of Addn/Altn To Agni And Trishul Rooms At Dihar Leh
Tender Value
19.09 Lakhs
Estimated cost
Bid Submission
04 Aug 2026
7 days left
EMD
38180
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Leh → Ladakh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Wall Panelling And Ceiling Of Scientist Hostel & Provision Of Addn/Altn To Agni And Trishul Rooms At Dihar Leh
BOQ
| Sl. No. | Item Description |
| 1 | Material and labour for 12mm thick prelaminated particle, board, exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 2 | Material and labour for 2nd class soft-wood Plain,of sectional area exc 13 sq.cm & n exc 25 Sq.cm fillets square, rectangular or triangular in section clean sawn, secured with nails or brads complete all as specified and directed. |
| 3 | Supply and fixing for GI frame work 605mmx605mm for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit/tie/purlins etc, at approx 900mm centre to centre with GI cleat and steel suspenders of appropriate size fixed to the intermediate channel woth connecting clips across the intermediate channel at 457 mm centre to centre including provision of 4mm thick non asbestos fibre cement board, IAI marked, fixed to snap grid frame works 605mm x 605mm as in ceiling, flat or sloppu as per manufacture's instuctions complete all as specified and directed. |
| 4 | Material and labour for readymade soft wood wall panelling in strips of 100mm width 9-10mm thickness having tongue and groove fixing arrangement fixed to wooden frame work as per manufacturer instruction including wooden frame work of 2nd class soft-wood plain,of sectional area exc 13 & n exc 25 Sq.cm fillets square, rectangular or triangular in section clean sawn, secured with nails or beads complete all as specified and directed. |
| 5 | Material and labour for readymade soft wood false ceiling in strips of 100mm width 9-10mm thickness having tongue and groove fixing arrangement fixed to wooden frame work as per manufacturer instruction including wooden frame work of 2nd class soft-wood Plain,of sectional area exc 13 & n exc 25 Sq.cm fillets square, rectangular or triangular in section clean sawn, secured with nails or beads complete all as specified and directed. |
| 6 | Providing and fixing for tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. 12.5 mm thick fully Perforated GypsumBoard tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79,with 50 mm resin bonded glass wool backing complete all as specified and directed. |
| 7 | Dismantling of old plaster wall/ceiling or skirting raking out joints and cleaning the surface for plaster including disposal of material and disposal of unserviceable material at any distance complete all as specified and directed. |
| 8 | Material and labour for 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 complete all as specified and directed. |
| 9 | Distempering on wall with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer complete all as specified and directed. |
| 10 | Dismantling of tile work in floors /wall in cement mortar including stacking material and disposal of unserviceable material at any distance complete all as specified and directed. |
| 11 | Providing and fixing for Ist quality ceramic glazed wall tiles (300MM x 450MM) conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black ofany size as approved by Engineer-in-Charge, in skirting, risers of stepsand dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shade complete all as specified and directed. |
| 12 | Material and labour for non skid coloured joint free ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but n. exc. 0.18 Sqm, vertical surfaces, in skirting etc. incl 10mm thick rendering in CM (1:4) as in vertical surfaces of skirting and set and jointed in neat cement slurry and pointed in whiter or coloured cement to match as in floor complete all as specified and directed. |
| 13 | Material and labour for non skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over 15 mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 14 | Material and labour for cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate complete all as specified and directed. |
| 15 | Supply and fixing in repairs vitreous china wash down water closet pan (pedestal pattern) of white colour including plastic water closet seat back closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, P or S trap, jet spray necessary inlet and outlet connections including syphonic action type low level PVC flushing cistern of 10 litrs capacity make white in colour and PVC flush pipe 32mm dia complete all as specified and directed. |
| 16 | Providing and fixing for wash basin with C.I. brackets and 15 mm dia CP brass single/Double hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a15 mm CP Brass single/double hole basin mixer pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require complete all as specified and directed. |
| 17 | Providing and fixing for C.P. brass angle valve for basin mixer and geyserpoints of approved quality conforming to IS:8931 15mm nominal bore complete all as specified and directed. |
| 18 | Providing and fixing for C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore complete all as specified and directed. |
| 19 | Providing and fixing for C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore complete all as specified and directed. |
| 20 | Providing and fixing for 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete all as specified and directed. |
| 21 | Supply and fixing for PTMT brass grating 100mm dia, centre hole, fixed in repair complete all as specified and as directed. |
| 22 | Supply and fixing for CP tubular towel rail, 20mm dia, D type, 60cm long between flanges aluminium anodized, fixed with rawl plugs. complete all as specified in repairs complete all as specified and directed. |
| 23 | Dismantling of G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore metre complete all as specified and directed. |
| 24 | Providing and fixing for 15mm G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc.complete all as specified and directed. |
| 25 | Providing and fixing for shower rose C.P. brass for 15 to 20 mm inlet 100 mm dia complete all as specified and directed. |
| 26 | Supply and fixing for vitreous china toilet paper holder of standard size complete all as specified and directed. |
| 27 | Supply and fixing for flexible (coil shaped) of size 32 mm dia PVC waste pipe for sink and wash basin complete all as specified and directed. |
| 28 | Providing and fixing for uplasticised PVC connection pipe with brass unions : 15 mm nominal bore and 300mm length complete all as specified and directed. |
| 29 | Providing and fixing for 8 mm dia C.P. / S.S. jet with flexible tube upto1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 30 | Providing and fixing for CP brass single lever wall mixer of quality & make as approved by Engineer in charge.(a) 15 mm nominal dia each complete all as specified and directed. |
| 31 | Providing and fixing for PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms complete all as specified and directed. |
| 32 | Supply and fixing in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 33 | Supply and fixing for chromium plated brass curtain rod 20 mm dia 1.25mm thick,with brackets and side coupling complete all as specified and directed. |
| 34 | Material and labour for 2nd class hardwood plain solid straight chowkats and frames wrought framed rebated on the solid round or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 35 | Supply and fixing for plain framed, panelled shutter (2nd class HW rail and style 35 mm thick, two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated fixing to frame/chowkhat complete all as specified and directed. |
| 36 | Supply and fixing for ordinary quality sheet glass 5.5 mm thick in panels of aluminium door and window etc fixed with aluminium clip and rubber beading all as specified n exc 0.5 sqm complete all as specified and directed. |
| 37 | Supply and fixing for mild steel butt hinges, 100 mm long, medium weight, cold rolled fixed with steel screws or welded to angle iron frame where required complete all as specified and directed. |
| 38 | Providing and fixing for bright finished brass handles with screws etc complete 125mm complete all as specified and directed. |
| 39 | Providing and fixing for bright finished brass tower bolts (barrel type) with necessary screws etc. complete 200 x 10 mm complete all as specified and directed. |
| 40 | Providing and fixing for ISI marked oxidised Brass sliding door bolts with nuts and screws etc. complete 300x16mm complete all as specified and directed. |
| 41 | Providing and fixing for 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete all as specified and directed. |
| 42 | Supply and fixing in repair aluminium (die cast) body door closer hydraulically regulated designation No.3 universal type suitable for aluminium door shutters of width 851 to 1000mm and of weight between 61 to 80Kg complete all as specified and directed. |
| 43 | Demolition of nominal concrete 1:3:6 or richer mix cement concrete manually/by machinacal means including disposal of material with in 50 mtrs in leads complete and all as specified and directed. |
| 44 | Dismantling of wooden boardings in linings of wall and partitions of thickness above 10mm upto 25mm, excluding supporting members but including stacking with in 50 mtrs leads complete all as specified and directed. |
| 45 | Taking down any type of doors, windows,clerestry window shutters(steel or wood) of area 3 sqm and below including stacking within 50m leads complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender