Tender For Repair/Maint Of B/R Works Of Various E/M Installations In K Tee And Fort Area Nagpur Under Ge K Tee.
Tender Value
25 Lakhs
Estimated cost
Bid Submission
04 Aug 2026
20 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of B/R Works Of Various E/M Installations In K Tee And Fort Area Nagpur Under Ge K Tee.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed. |
| 2 | Dismantling fencing wire mesh of any description complete all as specified and as directed. |
| 3 | Excavating in post holes (orsimilar holes) each n exc 0.5cu. m, getting out, returning,filling in and ramming earthor broken rubble mixed withearth around, in layers notexceeding 25 cm , watering and removing surplus soil to a distance n-exc 50 m and making good surface in soft /loose soil complete all as specified and as directed. |
| 4 | M&L for Cement concrete type C2 1:3:6 ( using 40 mm graded stone agg) as in foundations,filling and mass concrete complete all as specified and as directed. |
| 5 | S&F of angle iron posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified. |
| 6 | Supply of Chain link MS galvanisd fencing of size of any type and size complete all as specified and directed. |
| 7 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provission of binding wire complete all as specified and directed.Note :- chain link fencing, nut bolts and line wires shall be measured seperately under supply only |
| 8 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long butnot exc 10 cm long of 5 to 10 mm dia complete all as specified and directed. |
| 9 | S&F Mild steel round bars 10mm dia as in tie rod cut to length, bent to shape required, for fixing of chain link fencing complete all as specified and directed. |
| 10 | S&F in repair for galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and as directed. (Each line wire to be measured). |
| 11 | Dismantling old structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 12 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete complete all as specified and directed. |
| 13 | Dismantling asbestos cement (corrugated, semi corrugated etc) sheet in roof covering complete all as specified and directed . |
| 14 | S&F structural rolled mild steel as in roof trusses (framed), purlins crane gantries, rail and fastenings and heavy brackets framing (beam, tee, angle, channel or flat section) including distance pieces, cleats etc complete and similar work conforming to Fe 410-O or Fe 310-O complete all as specified and directed . |
| 15 | M&L Mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe-410W Gde E-250 quality B complete all as specified and as directed. |
| 16 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 17 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in weather boarding/eaves board in approved design/ pattern/shape to match with existing adjacent water boarding/eaves boards inclusive, as in ridges, hips, valley gutters, drip and straight and fixed with self tapping screw/nut bolt/normal GI screw/nail et as per site requirement and for entire completion of work at any height/position complete all as specified and as directed. |
| 18 | M&L for Preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth,and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed. |
| 19 | M&L for Preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth,and applying two coats of aluminium paint over and including one coat of aluminium primer complete all as specified and directed. |
| 20 | Preparation of new or previous untreated surfaces of steel and iron of any description n exc 10cm width or girth not when unconnected with other painting or when painted in a different tint and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 21 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft /loose soil/ black cotton soil complete all as specified and directed. |
| 22 | M&L for Cement concrete type D2 1:4:8 ( using 40 mm graded stone agg) as in foundations,filling and mass concrete complete all as specified and directed. |
| 23 | Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast con-crete articles complete all as specified and directed |
| 24 | M&L for brick work with fly ash bricks (using old size brick) straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed. |
| 25 | M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls /concrete surfaces finished even and smooth without using extra cement complete all as specified and directed |
| 26 | M&L for preparation of surfaces plastered or unplastered new surface of wall by washing, rubbing down and stopping of surfaces and applying two coat of cement base paint on walls complete all as specified and directed |
| 27 | M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls finished even and smooth without using extra cement incl taking down cement plaster of any description on brick work or stone msonary wall including racking ot joints hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 28 | M&L for 15mm thick plaster in CM 1:4 on brick or concrete surface finished even and smooth without using extra cement over average 20 mm thick dubbing out on irregular face of brick or concrete surface in CM 1:4 incl taking down cement plaster of any description on brick work or stone msonary wall including racking ot joints hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 29 | M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 30 | M&L for providing cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping benching, bed plates and the similar including, weathering, slightly rounded or chamfered edges and throating complete all as specified and directed. |
| 31 | Demolition of reinforced cement concrete any description and in any position not otherwise specifically provided for and disposal of unserviceable materials, debris and rubbish off the premises complete all as specified and directed. |
| 32 | M&L for precast RCC 1:2:4 type B1 using 20mm stone aggregate as in landings, cover slabs, for manholes etc and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed. |
| 33 | S&F for TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips. |
| 34 | M&L for RCC 1:2:4 type B1 (using 20mm graded stone agg) as in slab and shelves supported on walls incl demolition of reinforeced cement concrete of any description and in any position all as specified and directed |
| 35 | M&L form work to soffits of suspended slab such as roof slab and similar work n. exc 200mm thick (horizental or sloping) rough finished flat surface all as specified |
| 36 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil complete all as specified and directed. |
| 37 | Removing excavated material (soil) not exc 50m and deposited where directed at a level not exc 1.5m above the starting point complete all as specified and directed. |
| 38 | M&L for providing 40mm thick cement concrete 1:2:4 type B1 (using 20mm thick graded stone aggregate) as in floor, laid in panels and position to conform to design and finishing top surface even and smooth with using extra cement incl demolition of cement concrete complete all as specified and directed |
| 39 | S&F 3mm thick and 38mm wide glass dividing strips as in floors inserted in position, conform to design complete all as specified and directed |
| 40 | Demoltion of cement concrete (un reinforced ) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 41 | M&L for 40 mm thick sand filling under floor or in foundation including watering and consolidation etc complete all as directed. |
| 42 | M&L for machine pressed precast concrete interlocking paver block, rubber finished any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade etc over 100 mm thick PCC 1:4:8 type D2 complete all as directed. |
| 43 | M&L for machine pressed precast concrete interlocking paver block, rubber finished any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade etc over 100 mm thick PCC 1:4:8 type D2 complete all as specified and directed complete all as directed. |
| 44 | M & L for Hardcore of gauge n exc. 63 mm Broken stone or boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed. |
| 45 | M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in surface channel or drain or benching in manhole incl demoltion of cement concrete as in drain etc complete all as specified and directed |
| 46 | M&L for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitered/stopped ends etc complete all as specified and directed |
| 47 | NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 74,250.00] Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender