Tender For Repair/Maint/Replacement/Servicing Of Power Factor Improvement Apfc Panel, Lt Panels, Mccbs, Battery Bank, And Connected Misc Electrical Works At Ayodhya Cantt Under Age (I) Ayodhya.
Tender Overview
Project Description
Tender for Repair/Maint/Replacement/Servicing Of Power Factor Improvement Apfc Panel, Lt Panels, Mccbs, Battery Bank, And Connected Misc Electrical Works At Ayodhya Cantt Under Age (I) Ayodhya.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-Jul-2026 | Corrigendum | Other | 04-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Supply , laying, jointing & testing of XLPE (XLPE cable confirming to IS 7098 Part I) insulated ,armoured heavy duty electric cable with alumnium conductor, 1100 volts grade, corss sectional area 16 Sqmm 4 core complete all as specified and directed. |
| 2 | All as per ser item No. 1.00 here-in-before but 35 Sqmm 3½ core complete all as specified and directed. |
| 3 | All as per ser item No. 1.00 here-in-before but 50 Sqmm 3½ core complete all as specified and directed. |
| 4 | Excavation in trenches, not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for foundation of poles, stays or for taking out/laying of cables and getting out in soft/loose soil complete all as specified and directed by Engr-in-Charge. |
| 5 | Returning, filling in, any type of soil and spreading in layers n. exc 25 Cm thick each layer including watering & well ramming complete all as specified & directed. |
| 6 | Removal of surplus soil to a distance n.exc 50 mtr & depositing where directed at a level n. exc. 1.5mtr above the starting point complete all as specified & directed. |
| 7 | M& L for sub class 'B'bricks locally available best quality laid flat (length of bricks laid across the length of cable) in trenches for protection of U/G cable complete all as specified and directed by Engr-in-Charge. |
| 8 | M&L for sand cushioning with layer of sand 8 cm thick before laying of cable and 15 cm after lying of cable in trenches complete all as specified & directed.Note: Punned thickness of sand will be measured only. |
| 9 | Supply and fixing / laying in replacement of galvanized iron pipe of 40 mm nominal dia light grade fixed to poles with clamps nuts, bolts and washers or laid under road crossing or fixed to wall complete all as specified and directed. Note : The cost of MS clamp, nut, bolt, washer and GI fittings etc shall be inclusive in the item rate. |
| 10 | Cutting of floor/wall/footpath for removal of LT U/G cable of any size/description and making good with PCC 1:3 :6 type C-2 the same as per existing specification after relaying the same or new cable and all as specified & directed. |
| 11 | M& L for Horizontal boring in soft/loose soil/under roads of any width by manual arrangements for inserting GI pipe up to 100mm/80mm bore for passing of cables complete all as specified and directed by Engr-in-Charge. Note : GI pipe shall be measured and paid separately. |
| 12 | Material and labour for PCC 1:3:6 type C-2,using stone aggregate 40mm graded as in foundation of stays and coping of poles including necessary form work where required and fair finish to the exposed surfaces including broken of existing PCC all as specified & directed. |
| 13 | Material and labour for PCC 1:4:8 type D-2, using stone aggregate 40mm graded as in foundation for electric poles and making of cable duct including necessary form work where required and fair finish to the exposed surfaces all as specified & directed. |
| 14 | M & L in replacement of MS busbar chamber of nominal dimension 900 mm x 600 mm x 300 mm duly provided with aluminimum busbar colour coded insulted sleeves (RYBN ) of size 50 mm x 6mm fixed on porcelain insulators ,TPN type out door weather/vermin proof with both way opening (front & Rear) duly provided with neoprene rubber gasket along the doors openings pedestal type duly painted powder coated on CRCA steel sheet encloser complete with grouting of bus bar chamber in ground by using angle iron frame of size 40mm x 40mm x 5mm, (height of legs 600 mm) grouted with PCC (1:2:4) type C-1 with 20mm graded stone aggregate and the bus bar with 04 sets of holes with SS nut bolts & washers all as specified and directed incl making connection /thimbles etc complete all as specified and directed. Please Enable Macros to View BoQ information |
| 15 | M & L in replacement of MS busbar chamber of nominal dimension 900 mm x 600 mm x 300 mm duly provided with aluminimum busbar colour coded insulted sleeves (RYBN ) of size 50 mm x 6mm fixed on porcelain insulators ,TPN type out door weather/vermin proof with both way opening (front & Rear) duly provided with neoprene rubber gasket along the doors openings pedestal type duly painted powder coated on CRCA steel sheet encloser complete with grouting of bus bar chamber in ground by using angle iron frame of size 40mm x 40mm x 5mm, (height of legs 600 mm) grouted with PCC (1:2:4) type C-1 with 20mm graded stone aggregate and the bus bar with 04 sets of holes with SS nut bolts & washers all as specified and directed incl making connection /thimbles etc complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 12 daysBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender