Tender For Comprehensive Repair/ Maintenance Of B/R Nature Works In The Bldgs And Repair To Joinery Works Incl Doors, Windows, Rolling Shutters And Cleaning Of Overhead Water Tanks In North Side Of Runway At Bhisiana Under Ge (Af) Bhisiana
Tender Value
39.99 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
5 days left
EMD
79980
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Repair/ Maintenance Of B/R Nature Works In The Bldgs And Repair To Joinery Works Incl Doors, Windows, Rolling Shutters And Cleaning Of Overhead Water Tanks In North Side Of Runway At Bhisiana Under Ge (Af) Bhisiana
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 28-Jul-2026 | Corrigendum01 | Date | 15-Aug-2026 |
| 2 | 05-Aug-2026 | Revised dates | Date | 17-Aug-2026 |
| 3 | 01-Aug-2026 | Corrigendum02 | BOQ | 17-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, in any description, stacking serviceable brick for re use if directed and balance removing rubbish from the site complete all as specified and as directed. |
| 2 | Material and labour for brick work using old serviceable bricks obtained from dismantled item shall be reused after cleaning old cement mortar, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed. |
| 3 | Material and labour for brick work with sub class ‘B’ old size burnt clay bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge. |
| 4 | Material and labour for brick work in half brick thick wall straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:4) complete all as specified and as directed by Engineer-in-charge. |
| 5 | Taking down cement plaster/rough cast plaster from brick walls/soffits of roof projections & chajjas /ceilings etc. including racking out joints, hacking for key & scrubbing down with water etc including disposal of rubbish material to any distance out side MOD land complete all as specified and as directed. |
| 6 | Material and labour for 15mm thick cement plastering in cement mortar (1:4) on any face of Brick walls or concrete surfaces including mixing of liquid WPC in mortar @ 200 ml per bag of cement of 50kg, finished even and fair complete all as specified and as directed. Note :- WPC shall be measured & paid separately as Supply only under appropriate item of BOQ. |
| 7 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 8 | Material and labour for rendering/plastering 15 mm thick in CM (1:6) on any face of Brick walls or concrete surfaces, finished even and fair complete all as specified and as directed. |
| 9 | Material and labour for rendering/plastering 5 mm thick in CM (1:3) on concrete surfaces of ceiling, finished fair and even complete all as specified and as directed. |
| 10 | Supply and fixing chicken wire mesh ( Morga jali ) in cement plaster or over joints of RCC and brickwork or as per site requirement of 24 gauge & 10-13 mm mesh, width as required for construction joints, plastering work at joints wall & RCC, and chasing in brick work for electrical conduits or water supply pipes, including pegs/nails, binding wire as required for fixing/supporting arrangement before rendering / plastering etc. as per site requirement complete all as specified and as directed.Note: Rendering / plastering shall be measured and paid separately under respective item of BOQ |
| 11 | Material and labour for rough cast plaster on exterior walls in two layers, under layer not less than 10mm cement plaster (1:3) (1 cement: 3 coarse sand ) furrowing the under layer with scratching tool, and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of (1: 1: 1) shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregates are thoroughly covered, complete in all respects and as specified and directed by the Engineer-in-Charge. |
| 12 | Material and labour for preparation of new plastered surfaces of ceiling by brooming down or by sand papering or by any other mean and after preparing the surfaces applying three coats of white wash by using paint brush complete all as specified and as directed. |
| 13 | Material and labour for preparation of interior surfaces of walls/ceiling/soffits etc (on new surface or old prepared surface after complete removal where directed through site order book), applying acrylic putty is a water-based, Smooth, creamy paste (ready-to-use), white or off-white color (thickness vary from 1.5 to 2 mm as required for desired smoothness and levelling of surfaces in two or more layers), including sanding with wall sander after filling the putty in first coat/second coat to make surface smooth and ready for receiving further painting work complete all as specified and as directed.Notes : (i) The prepared surface after putty, the contractor will inform to the Engineer-in-Charge/GE for site inspection before applying further finishes. Further finishes work will start only after approval of the prepared surface from the Engineer-in-Charge through site order. |
| 14 | Material and labour for applying 02 coats of interior acrylic emulsion paint of approved tint/shade (Company Depot Tinted) @ 8 sq.m/litre/2 coats to wall surfaces (on new surface or old prepared internal surface after complete removal and applying putty) over and including a coat of interior primer @ 11 sq.m/litre/1 coat (primer shall be same make as acrylic emulsion paint), paint and primer applying by using paint roller brush complete all as specified and as directed.Brand and Make of interior acrylic emulsion paint: - Bison Acrylic Emulsion of Berger / Tractor Emulsion of Asian / Beaty Smooth of Nerolac Brand and Make of primer: - Seal O Primer of Berger / Smart Care Primero of Asian / Excel Alkali Prime of Nerolac |
| 15 | Material and labour for applying 02 coats of exterior acrylic emulsion paint of approved tint/shade (Company Depot Tinted) @ 6 sq.m/litre/2 coats to external walls / Soffits of Chajjas / Roof Projections / Cantilevers / Balcony etc. (on new surface or old prepared external surface after complete removal) over and including a coat of exterior primer @ 11 sq.m/litre/1 coat (primer shall be same make as acrylic emulsion paint), paint and primer applying by using airless spray gun complete all as specified and as directed.Brand and Make of exterior acrylic emulsion paint: - Apex Ultima of Asian / Weather Coat antidust of Berger / Weather shield Protect of Dulux / Excel Total of Nerolac Brand and Make of primer: - Seal O Primer of Berger / Smart Care Primero of Asian / Excel Alkali Prime of Nerolac |
| 16 | Material and labour for preparation of new steel and iron surfaces of any description, not otherwise described, exceeding 10 cm in width or girth, including cleaning the surface free from dust, dirt, grease, oil and other foreign matter and surface imperfections by rubbing down with emery paper/sand paper or by other approved means to obtain a clean, smooth and even surface and further applying one coat of red oxide zinc chromate primer and two coats of first-quality synthetic enamel paint of approved brand, shade and tint, each coat applied by brush only after proper preparation and complete drying of the preceding coat, to produce a smooth, uniform, durable and aesthetically acceptable finish, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 17 | Material and labour for preparation of new wooden or wood-based surfaces of any description, not otherwise described, exceeding 10 cm in width or girth, including cleaning the surface free from dust, dirt and other foreign matter, rubbing down with sand paper to obtain a smooth and even surface, filling nail holes, minor cracks, joints and hairline defects with approved wood filler or a mixture of synthetic adhesive (Fevicol or equivalent) and commercial wood powder, and rubbing down the filled surfaces smooth after drying, and further applying one coat of pink wood primer and two coats of synthetic enamel paint of approved brand and shade, each coat applied by brush only after proper preparation and complete drying of the preceding coat, to produce a smooth, uniform, durable and aesthetically acceptable finish, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 18 | Material and labour for preparation and painting of new raw WPC (Wood Polymer Composite) surfaces only, including raw (unlaminated) WPC boards, exposed cut edges, door shutters, door frames (chowkhats), architraves, beading and other WPC components of any description, not otherwise specified, by thoroughly cleaning the surfaces to remove dust, dirt and other foreign matter, lightly abrading the surface/edges wherever required to obtain proper adhesion, and applying two coats of approved synthetic enamel paint of approved brand, shade and finish. The paint shall be applied by brush only, each coat being applied only after proper surface preparation and complete drying of the preceding coat, to obtain a smooth, uniform, durable and aesthetically pleasing finish. The exposed raw edges and cut surfaces shall be finished in a shade matching the existing laminate/foil colour of the WPC member, complete in all respects, as specified and directed by the Engineer-in-Charge. |
| 19 | Material and labour for preparation of existing external treated surface of walls / Soffits of Chajjas / Roof Projections etc. by removing/scraping all loose paint, treatment, dust, dirt and other foreign matter using broom, paint brush, sand paper, wall sander or any other suitable means as required and applying two coats of premium quality water-based exterior emulsion paint based on 100% acrylic binder with silicone additives, having VOC content not exceeding 50 g/litre when tested in accordance with IS 101 (Part 2/Sec 2) and UV resistance conforming to IS 15489:2004 or latest revision, of approved brand and manufacture, in camouflage pattern using 4 to 5 approved colour shades as per pattern approved by the Engineer-in-Charge. The paint shall have a coverage capacity of approximately 6.5 to 7.5 square metres per litre for two coats and shall be applied over one coat of alkali-resistant water-based exterior primer of the same make having a coverage capacity of approximately 11 to 14 square metres per litre per coat, the paint shall be applied by brush, roller or airless spray gun as directed by the Engineer-in-Charge and in accordance with the manufacturer's recommendations to achieve a uniform finish and camouflage pattern, complete in all respects as specified and directed by the Engineer-in-Charge.Brand and Make of primer: - Seal O Primer of Berger / Smart Care Primero of Asian / Excel Alkali Prime of Nerolac /Weathershield Alkali Bloc PU+ Primer of DuluxBrand and Make of exterior acrylic emulsion paint: - Apex Ultima of Asian / Weather Coat antidust of Berger / Weather shield Protect of Dulux / Excel Total of NerolacNotes : (i) A minimum interval of 4 to 6 hours, or such duration as recommended by the manufacturer, shall be maintained between successive coats to ensure proper drying, curing and adhesion of the paint system.(ii) The percentage, distribution, arrangement, sequence and configuration of the approved colour shades forming the camouflage pattern shall be finalized by the Engineer-in-Charge/Station Authority using 4 to 5 approved colour shades having RGB values within the range of 110 to 171, ensuring adequate colour variation and blending to achieve the desired camouflage effect.(iii) The approved camouflage pattern shall be maintained uniformly throughout the work. Any deviation from the approved pattern, colour shades or workmanship standards shall be rectified by the Contractor at his own cost and to the entire satisfaction of the Engineer-in-Charge. |
| 20 | Demolition of cement concrete reinforced of any description such as slab, beam, staircase, landing chajja, kitchen chimney, OHT staging, fins, shelves, etc, including reinforcement cut as required to facilitate demolition and prepare the surface to casting/jointing new including removing rubbish material from building and thrown in low lying empty area at any distance from the site complete all as specified and as directed. |
| 21 | Material and labour for reinforced cement concrete M-15 (Nominal mix) using 20mm nominal size of graded coarse aggregate as in slabs/cooking platform supported on walls, beams and columns landing, balconies, canopies, deck slabs and in cup board shelves and the like complete all as specified and as directed.(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of BOQ. |
| 22 | Form work to soffits of suspended slabs such as flat roof slabs, floor slabs, shelf slab, landings and similar work not exceeding 200mm thick (horizontal or sloping) rough finished complete all as specified and as directed by Engineer-in- charge. |
| 23 | Material and labour for mild steel TMT bars, grade Fe 500D/550D, 10mm dia & over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.(NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.) |
| 24 | Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15cm thickness below or above ground level of any description and in any position and including disposal of rubbish material to any distance out side MOD land complete all as specified and as directed. |
| 25 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided including removing debries/rubbish material from site to outside MOD land complete all as specified and as directed. |
| 26 | Material and labour for PCC (1:2:4), type B-0 using 12.5 mm graded stone aggregate as in coping at roof, roof kerb (golla) or mud stops along parapet wall, side of roof sheet along parapet wall, adjoining to roof in concave shape & similar work etc at any height, rounded or chamfered on edges including necessary form work etc complete all as specified and directed by Engineer-in-Charge. |
| 27 | Material and labour for 40mm thick cement concrete (1:2:4), Type-B-1 , using 20 mm graded stone aggregates as in floors, pavement, hardstanding and finishing the surface of concrete topping even and smooth (without using extra cement) complete all as specified and as directed. |
| 28 | Material and labour for 75 mm thick PCC (1:3:6) type C-2 using 40mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement including 10mm wide, 30mm deep joints at the rate of 2.00 mtr centre to centre and at every turning point, filling the Joints with bituminous sealing compound of grade ‘A’/bitumen mastic filler/sealant complete all as specified and as directed |
| 29 | Material and labour for 75mm thick cement concrete ( 1:4:8), type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and as directed. |
| 30 | Dismantling of floor hearth or wall tilling including cement mortar bedding but not backing including removing rubbish material from building and thrown in low lying empty area at any distance as direccted from the site complete all as specified and as directed |
| 31 | M&L for providing Non-skid tiles (approved shade), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm (square/rectangular), as per IS 15622: 2017 and IS 13712: 2019, group B1b, having thickness not less than 7mm, premium quality having water absorption should be between 3% to 6%, straight edge/rectified, stain free, laid as in Flooring, set and jointed in Neat Cement Slurry and pointed in White/Coloured Cement, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar (1:4), complete all as specified and as directed. |
| 32 | M&L for providing glazed ceramic coloured tiles (any shade in any pattern of light & dark, with or without highlighters etc as approved), as per IS 15622: 2017 and IS 13712: 2019, group B IIa, having thickness not less than 7mm, Premium quality having water absorption should be between 3% to 6%, straight edge/rectified, stain free, size of tile 350x250mm/ 450x300mm or any size between area of each tile exceeding 0.06 Sqm and not exceeding 0.18Sqm thick as direcetd as in Vertical Surface/Dado etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick Screed or Screed Bed in Cement Mortar (1:4), complete all as specified and as directed. |
| 33 | M&L for providing Double charge vitrified tiles (approved light shade), as per IS 15622: 2017 and IS 13712: 2019, group B Ia, having thickness not less than 8mm, premium quality having water absorption should be less than 0.08%, straight edge/rectified, stain free, area of each tile exceeding 0.18 Sqm but not exceeding 0.42 Sqm (square/rectangular), as in Flooring and connected skirting, set and jointed in Neat Cement Slurry, fixed the tile using spacer 3mm or as per manufacturer’s instruction and joint filled with epoxy grout matching with the colour of tiles, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar (1:4), complete all as specified and as directed. |
| 34 | Material and labour for providing and fixing premium quality acid-resistant unglazed vitreous ceramic tiles conforming to IS 4457:2007, Group B, having a thickness not less than 15 mm, with water absorption between 0.05% and 0.5% by mass, straight edge/rectified, stain resistant, of size having an area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm (square/rectangular), in floors and on walls, set, jointed and pointed with resin-type chemical-resistant mortar conforming to IS 4832 (Part 2), laid over and including 10 mm thick rough-finished cement mortar (1:4) bedding layer to receive the tiles, including cutting, fitting, finishing and cleaning, complete in all respects, all as specified and as directed by the Engineer-in-Charge. |
| 35 | Dismantling of stone slab tiling including cement mortar bedding ( but not backing) and including removing rubbish material from building and thrown in low lying empty area at any distance as direccted from the site complete all as specified and as directed by Engineer-in-Charge. |
| 36 | Material and labour 16-18mm thick approved shade Granite (like dark black, mahroom etc), machine cut, duly factory grinding and polishing (table rubbed and polished), as in table tops, steps, treads, risers, jambs, pillars, window cills, cooking platforms, for counter sunk wash basin and like or similar locations where directed, set & jointed in and including neat cement slurry, laid over and including 15mm thick cement mortar (1:4) screed bed, and pointing in white cement mixing with pigment to match with shade of slab, including cutting, dressing, edge finishing, rounding of exposed edges where required, including cleaning and extra polishing if required complete all as specified and as directed.Note : (i) Single piece should be used in steps/jambs/shelves, equal to width of slab (ii) The rate shall be deemed to include for accommodating holes/openings for gas pipes in kitchen cooking platforms and cutting for countertop/table top opening for under-counter wash basins, wherever required to suit the dimensions of the item being fixed. No extra payment shall be admissible on this account. |
| 37 | Material and labour for providing and fixing machine-cut Kota stone slabs, 16–18mm thick (minimum), of approved quality, colour and shade, Kota stone size of slab not less than 550x500mm, as in flooring, cut to the required size and shape, dressed true, set and jointed in position over and including a 15mm thick cement mortar (1:4) screed bed, laid to the required line, level and slope, with neat cement slurry. The work shall include cutting, dressing, trimming, machine finishing, forming mitred joints where required, pointing joints with white cement mixed with suitable matching pigment to match the colour and shade of the stone, rubbing, grinding and final polishing by machine/hand-held polishing machine to produce a smooth, even and lustrous finish, complete in all respects, as specified and directed by the Engineer-in-Charge. |
| 38 | Taking down any type of soil waste, vent pipe, rain water PVC Pipe of any dia and any descriptions, from along Walls/laid on Floors, etc., including all fittings, heads, shoes, bends, swan-neck etc complete all as specified and as directed. |
| 39 | Taking down any type of soil waste, vent pipe, rain water CI Pipe of any dia and any descriptions, from along Walls/laid on Floors, etc., including all fittings, heads, shoes, bends, swan-neck etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 40 | Taking down any type of soil waste, vent pipe, rain water CI Pipe of any dia and any descriptions, from along Walls/laid on Floors, etc., including all fittings, heads, shoes, bends, swan-neck etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 15, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 days
Aug 17, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 days
Aug 17, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender