Tender For Repair Of Roof Truss Including Replacement Of Damaged Cgi Sheets At Indoor Hydraulic Laboratory Building, Rri C Us, Mohanpur, Nadia During The Year 2026-27.
Tender Value
15.28 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
7 days left
EMD
30571
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nadia → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of Roof Truss Including Replacement Of Damaged Cgi Sheets At Indoor Hydraulic Laboratory Building, Rri C Us, Mohanpur, Nadia During The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. |
| 2 | Dismantling all types of plain cement concreteworks, stacking serviceable materials at site andremoving rubbish as directed within a lead of 75m. In ground floor including roof upto 150 mm. thick |
| 3 | Brick work with 1st class bricks in cement mortar (1:4) In superstructure, ground floor |
| 4 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. |
| 5 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] 20 mm thick plaster With 1:4 cement mortar |
| 6 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's pecification and as per direction of the EIC. In Ground Floor:One Coat |
| 7 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.In Ground floor (Two Coat) Normal Acrylic Emulsion |
| 8 | Taking out carefully G.C.I. or C.I. or asbestos sheets (including ridges etc.) from roof or wall after unscrewing bolts, nuts, screws etc.and stacking the material at site as directed.(Payment to be made on measurement of portion of roof or wall removed (Payment to be made on measurement of portionof roof or wall removed.). |
| 9 | Supplying, fitting & fixing Industrial Troughed Aluminiumsheet (excluding the supporting frame work) of approvedmake & brand in alloy 3105 conforming to IS: 1254-1991fitted and fixed with 75 mm & 25 mm Self tapping screw ,EPDM Washer 16 mm dia & 3 mm th washer etc completewith 150 mm. end lap and one corrugation minimum side lap.(Payment to be made on area of finished work) (Aluminiumsheet to be supplied by contractor). In Roof:-) With 0.65 mm thick sheet |
| 10 | Aluminium sheet ridging fitted with self tapping screws,EPDM washers etc complete.(Minimum 225mm end lapping). 300 mm lapping each way ,With 0.71 mm sheet |
| 11 | M.S. works in brackets made from flats, angles, tees etc. to sizes specialy bent, twisted, forged; making holes drilled and fitted to rafter of trusses with necessary bolts, nuts, washer or screws etc. (length of straight not less than 230 mm) |
| 12 | Labour for M.S. work in Rolled steel joists, channels,angles. Tees, plates etc. including hoisting, placingin position including providing staging andremoving after completion of works and cutting tosizes as required. |
| 13 | Painting with superior quality aluminium paint of approved make andbrand including smoothening surface by sand papering etc. on steelsurface : Two coats |
| 14 | Clearing compound premises of shurbs, plants, jungles etc. by cutting and removing as directed (Specific permission of Engineer-in-Charge prior to execution will be necessary). (Payment to be made on area cleared) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender