Tender For Renewing Of M.S. Platform On The Screen Chamber And Adjacent Penstock Gate Chamber With Other Allied Works At Ambedkar Drainage Pumping Station.
Tender Value
2.98 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
7 days left
EMD
6000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renewing Of M.S. Platform On The Screen Chamber And Adjacent Penstock Gate Chamber With Other Allied Works At Ambedkar Drainage Pumping Station.
BOQ
| Sl. No. | Item Description |
| 1 | BUILDING WORKS (B) DISMANTLING, CUTTING CHASE, HOLES ETC 3. Dismantling R.C. floor, roof, beams etc including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars.(a) In ground floor including roof. |
| 2 | BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS,GATES ETC. A. ORIGINAL WORKS 3. Cutting to requisite length orshape departmental R.S. joists,channels, angles, tees, plates etc.(Payment to be made on area of cut surface) |
| 3 | BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS,GATES ETC. B. REPAIRING 1. Labour for lowering and stacking after dismantling in parts R.S. joists, channels, angles, tees, plates etc.complete as directed (a) From 1st floor level |
| 4 | MATERIALS AND LABOUR 1. Building (B) Labour Rates Per Diem :13)Santras. Note: (I)The above rates of labour are exclusive of 10% contractors profit and 1% Labour welfare cess which would be admissible to the Contractors, but contractual percentage will not be applicable. (II) The workersemployed on high rise building or anystructure over 30 ft in height and also workers engaged in Tunnel shall be paid 20% extra wages. |
| 5 | BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC. A. ORIGINAL WORKS 6. Holding down bolt with nut including 100 x 100 x 6 mm plate washer at bottom fitted complete and packing the hole with cement concrete or cement grout asdirected. (iv) 32 mm dia: (a) 450 mm long |
| 6 | BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS,GATES ETC. A. ORIGINAL WORKS 1. M.S. structural works incolumns, beams etc. with simple rolled structural members (e.g.joists, angle, channel sections conforming to IS: 226, IS: 808 & SP(6)- 1964 connected to one another with bracket, gussets, cleats asper design, direction of Engineer-incharge complete including cuttingto requisite shape and length,fabrication with necessary bolting, metalarc welding conforming to IS: 816- 1969 & IS: 1995 using electrodesof approved make and brand conforming to IS:814- 2004, haulage,hoisting and erection all complete. The rate includes the cost of rolledsteel section, consumables such as electrodes, gas and hire chargeof all tools and plants and labour required for the work including allincidental chages such as electricity charges, labour insurancecharges etc. Payment to be made on the basis of calculated weight ofstructural members only in finished work as per IS specified weight.Payment for gusset, bracket, cleat, rivets, bolts and nuts may bemake by adding the actual weight of such items with the weight offinished structural members or 7% of weight for finished structuralmembers weighing not less than 22.5 Kg. / m. or 15 % of weight forfinished structal members weighing less than 22.5 Kg. / m. may beincreased allow for bracket, cleat, rivet, bolts and nuts etc. and noseperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof. II) For Structural Works in Roof Trusses etc. using joists, channels and angles of specified section weighing less than 22.5 kg/ m increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof. II) For Structural Works in Roof Trusses etc. using joists, channels and angles of specified section weighing less than 22.5 kg/ m |
| 7 | BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC. B. REPAIRING 2. Welding in M.S. structural work with gas or electric: (a) Tack weld |
| 8 | BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC. B. REPAIRING 2. Welding in M.S. structural work with gas or electric: (b) Continuous weld. |
| 9 | BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS,GATES ETC. A. ORIGINAL WORKS 5. Labour for hoisting and placing in proper position (up to 1st floor level) departmental R.S. joists, channels, angles. Tees, plates etc. including fitting and fixingsame with bolts and nuts, if necessary (but excluding cost of such bolts and nuts) |
| 10 | BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC. A. ORIGINAL WORKS 5. (a) Add extra for each additional floor over 1st floor. |
| 11 | SECTION 1. ------------BUILDING WORKS (K) PAINTING,VERNISHING ETC A. ORIGINAL WORKS 1 (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand paperingetc (This item is applicable to new work or old work when the original surface has been exposed by removal of old paint.) |
| 12 | BUILDING WORKS (K) PAINTING, VERNISHING ETC?(A)ORIGINAL WORKS.(2)(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) On steel or other metal surface : With other than hi-gloss of approved quality-(iv) Two coats (with any shade except white) |
| 13 | BUILDING WORKS ( C ) Brickworks,Concrete Works etc 10?. Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(i) Pakur Variety |
| 14 | MATERIALS AND LABOUR 1. Building (B) Labour Rates Per Diem :17)Fitter Mechanic. Note: (I)The above rates of labour are exclusiveof 10% contractors profit and 1% Labour welfare cess which would be admissible to the Contractors, but contractual percentage will not beapplicable. (II) The workersemployed on high rise building or any structure over 30 ft in height and also workers engaged in Tunnel shall be paid 20% extra wages. |
| 15 | MATERIALS AND LABOUR 1. Building (B) Labour Rates Per Diem :18)Fitter Mechanic (Helper). Note: (I)The above rates of labour areexclusive of 10% contractors profit and 1% Labour welfare cess which would be admissible to the Contractors, but contractual percentage will not be applicable. (II) The workersemployed on highrise building or any structure over 30 ft in height and also workers engaged in Tunnel shall be paid 20% extra wages. |
| 16 | Estimated amount |
| 17 | Add: 9%SGST |
| 18 | Add: 9%CGST |
| 19 | 1% LWC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender