Tender For Maintenance Of F.A. Circle Office At Barpathari Under Supdt. Of Fisheries Belonia Sub-Division
Tender Value
3.07 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
0 days left
EMD
6159
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Of F.A. Circle Office At Barpathari Under Supdt. Of Fisheries Belonia Sub-Division
BOQ
| Sl. No. | Item Description |
| 1 | Item Description |
| 2 | Providing corrugated G.S. sheet roofing includingvertical/curved surface fixed with polymer coated Jor L hooks, bolts and nuts 8 mm diameter withbitumen and G.I. limpet washers or with G.I. limpetwashers filled with white lead and including a coatof approved steel primer and two coats of approvedpaint on overlapping of sheets complete (up to anypitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses andincluding cutting to size and shape wherever requiredetc. complete as per direction of Engineer-in-charge. 0.50mm thick with zinc coating not less than 275gm/m2 |
| 3 | Providing ridges or hips of width 60 cm overall widthplain G.S. sheet fixed with polymer coated J or L hooks,bolts and nuts 8 mm dia G.I. limpet and bitumenwashers etc. complete as per direction of Engineer-incharge. 0.25mm thick with zinc coating not less than 275gm/m2 |
| 4 | Providing and fixing flat pressed 3 layer mediumdensity particle board or graded particle board (Grade I)IS: 3087 marked in ceiling with necessary nails etc.complete as per direction of Engineer-in-charge. (framework to be paid separately): 12 mm thick |
| 5 | Providing wood work in frames of false ceiling, partitions etc. sawn and put up in position : Soft Wood |
| 6 | 6.12 Half brickmasonryworkwith first class bricks insuperstructureuptofloor five level includingcostofall materials as required complete: In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 7 | 12 mm cement plaster of mix Cement mortar 1:4 (1 cement : 4 fine sand) |
| 8 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering --All work upto plinth level: 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brickaggregate 40 mm nominal size) |
| 9 | 6 mm cement plaster of mix : Cement mortar 1:4 (1 cement : 4 fine sand) |
| 10 | Neat cement punning. |
| 11 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and respectively. 340x410x265mm sizes |
| 12 | Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. |
| 13 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kg/cm2) conforming to IS : 13592TypeA including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc.complete as per direction of Engineer-in-charge : Single socketed pipe - 75 mm OD |
| 14 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kg/cm2) conforming to IS : 13592TypeA including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc.complete as per direction of Engineer-in-charge : Single socketed pipe - 110 mm OD |
| 15 | Providing and fixingonwall faceunplasticised-PVC moulded fittings/ accessories for unplasticised Rigid PVCrainwaterpipesconformingto IS : 13592Type-A including jointing withseal ring conforming to IS : 5382 leaving10mmgap for thermal expansionetc. complete as per direction of Engineer-in-charge : Coupler 75 mm |
| 16 | Providing and fixingonwall faceunplasticised-PVCmoulded fittings/ accessories for unplasticisedRigidPVCrainwaterpipesconformingto IS : 13592Type-Aincluding jointing withseal ring conforming to IS :5382 leaving10mmgap for thermal expansionetc.complete as per direction of Engineer-in-charge : Coupler 110 mm |
| 17 | Providing and fixingonwall faceunplasticised-PVCmoulded fittings/ accessories for unplasticisedRigidPVCrainwaterpipesconformingto IS : 13592Type-Aincluding jointing withseal ring conforming to IS :5382 leaving10mmgap for thermal expansionetc.complete as per direction of Engineer-in-charge : Bend 87.5° 75mm |
| 18 | Providing and fixingonwall faceunplasticised-PVCmoulded fittings/ accessories for unplasticisedRigidPVCrainwaterpipesconformingto IS : 13592Type-Aincluding jointing withseal ring conforming to IS :5382 leaving10mmgap for thermal expansionetc.complete as per direction of Engineer-in-charge : Bend 87.5° 110mm |
| 19 | Providing and fixing 1mm thick M.S. sheet door withframe of 40x40x6mm angle iron and 3mm M.S. gussetplates at the junctions and corners, & with cleats withbolts & nuts, rivets, locking arrangement, handles, hooks& eyes, pinlets including embedding in cement concreteof required grade for fixing in position, all necessaryfittings, including applying a priming coat of approvedsteel primer etc. complete as required:- Using M.S. angels 40x40x6 mm for diagonal braces. |
| 20 | Steel work in built up tubular (round, square orrectangular hollow tubes etc.) trusses etc., includingcutting, hoisting, fixing in position and applying apriming coat of approved steel primer, including weldingand bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes |
| 21 | Providing and laying 1st class quality vitrified floor tilesin different sizes (thickness to be specified by themanufacturer) with water absorption less than 0.08% andconforming to IS: 15622- 2017, of approved make, in allcolours and shades, laid over 20mm thick cement mortar1:4 (1 cement : 4 fine sand), jointing with grey cementslurry @ 3.3 kg/ sqm including grouting the joints withwhite cement and matching pigments etc. all complete asper direction of the Engineer-in-charge.. Soluble Salt Stainfree vitrified tiles (Glossy) Size of tile 600 mm x 600 mm |
| 22 | Repairs to plaster of thickness 12 mm to 20 mm inpatches of area 2.5 sqm and under including cutting thepatch in proper shape and preparing and plastering thesurface of the walls complete including disposal ofrubbish to the dumping ground with all leads and liftsincluding finishing even and smooth and curingcomplete as per direction of the Engineer in charge: With cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 23 | Distempering with 1st quality washable acrylicdistemper of approved brand and manufacture and ofrequired shade on old work ( one or more coats ), togive an even shade as required complete as perdirection of the Engineer in charge. |
| 24 | Finishing walls with acrylic smooth exterior paint ofrequired shade of approved brand and manufacture onold work ( one or more coats ) including preparation ofsurface as required complete as per direction of theEngineer in charge. |
| 25 | Painting on G.S. sheet with synthetic enamel paint ( oneor more coats ) of approved brand and manufacture ofrequired colour to give an even shade on old workincluding preparation of surface as required completeas per direction of the Engineer in charge: |
| 26 | Painting with synthetic enamel paint ( one or morecoats ) of required colour of approved brand andmanufacture on old work to give an even shadeincluding preparation of surface as required completeas per direction of the Engineer in charge. |
| 27 | Boringwith100mmdiametercasingpipe forhandpump/ tubewell in all soils except ordinaryhardrocks requiring blasting including removing thecasingpipeafterthehandpipe/tubewell isloweredand tested : Beyond 12 m and upto 18 m depth. |
| 28 | Providingandplacing inposition filtersof 40mmdiameterG.I. pipeofmedimclassasper IS : 1239with latest amendment with brass strainer ofapproved quality. |
| 29 | Providingandfixingtofilterandloweringtoproperlevels 40 mmG.I. pipe for tube well includingcleaning and priming the tube well. |
| 30 | Providing and placing in position hand pump ofapproved quality for 40 mm diameter G.I. pipecomplete with all accessories. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender