Tender For Annual Operation And Maintenance Works Of 10Mgd Water Treatment Plant At Parthan, 3.33Mg Service Reservoir At Dadina And Control Room At Khomeini Chowk For Water Supply Scheme Sukhnag (Stage Contract 2026-27 Under M&R)
Tender Value
6.50 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
2 days left
EMD
13000
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Operation And Maintenance Works Of 10Mgd Water Treatment Plant At Parthan, 3.33Mg Service Reservoir At Dadina And Control Room At Khomeini Chowk For Water Supply Scheme Sukhnag (Stage Contract 2026-27 Under M&R)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 27-Jul-2026 | EXTENSIONI | Date | 31-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Repairing by means of dismantling of backwash motors/air blowers/ churners/Alum motors/ bleaching motors/mixers of filtration plants by way of rewinding of core made out of copper metal fiber superior type of required thickness and guage. The job includes replacing of bearings, water seal, nuts, bolts, rubber washers and painting of instruments. The job also includes all sorts of carriage from site to work upto workshop to & fro including testing & commissioning of following capacity. i. For 0.50 HP to 2.00 HP |
| 2 | i. For 3.00 HP to 5.00 HP |
| 3 | ii. For 20.00 to 25 HP |
| 4 | For 30.00 to 40 HP |
| 5 | Dismantling of complete reduction gear unit of de-sludge bridges for repairs by way of providing & manufacturing of complete reduction gear with hub. The job includes costing of brass material, grinding & finishing of worm gear in order to make the new teeth, replacement of damaged oil seals by way of new one, replacement of ball bearings, pouring of required specific gravity gear oil in order to run the reduction gear in smooth order, refixing of same at the site of work incld. all sorts of carriage from site of work upto workshop and back to site of work including testing & successful commissioning (Complete job) |
| 6 | Overhauling voltage stabilizers (AVR's/SERVO) installed at site. The job includes pouring / filling of transformer oil of required specified gravity, replacement of driven rotors (automatic), replacement of voltage meters, Amp meters, indicators, thimbles etc. complete job, making the unit completely functional for bearing of required load. The job also includes labour charges, cost of wiring, pin sockets and all sorts of carriages from site of work upto the workshop & back to actual site of work incld. installation at site & testing, successful commissioning complete job.i. 5 KV to 10 KV |
| 7 | i. 10 KV to 20 KV |
| 8 | ii. 20 KV to 50 KV |
| 9 | 60 KV to 250 KV |
| 10 | Desilting of various structures like Clariflocculators, Service Reservoir, Settling Chamber, Raw/Settled Water Channels, Sumps, Pipe Gallery, Drains, Beds etc. including disposal of de-silted material. The job includes hire charges/fuel charges of dewatering pumps, breaking of deposited sediments or silt/lumps by manual means, and passing/pushing through the same via washout pipes for final disposal. The job also includes scarifying, washing and cleaning of walls, beds, drains and floor etc. with bleaching powder solution and also charges of T&P required for complete job. |
| 11 | Providing and Fixing of M.C.C.B. Havells make the job includes dismantling of damaged/non functional Amp. M.C.C.B. and fixing of new one including all sorts carriage from source to workshop including carriages of salvaged material from filtration plant upto Divisional Stores including testing, installing and commissioning complete job i. 200 Amp, 4 Pole. |
| 12 | i. 100 Amp, 4 Pole. |
| 13 | ii. 63 Amp, 4 Pole |
| 14 | 32 Amp, 3 Pole |
| 15 | Providing and Fixing of oil cooled type 25 to 30H.P. Starter of standard make the job includes dismantling of damaged /non functional starter and fixing of new one incl. all sorts of carriages from source to workshop including carriages of salvaged materials from filtration plant upto Divisional Stores, including testing, installing and commissioning complete job. |
| 16 | Providing and Fixing of running V-Belt of groove type for air blower, the job includes dismantling damages ones and fixing of new ones incl. successful testing, commissioning. All types of carriage complete |
| 17 | Servicing of 125 KVA 6 B.T. Cummins make D.G. set by way of draining of old M-oil from the sump, flushing the chamber with HSD to remove all un-dissolved impurities and then refilling the sump with fresh M-oil (Valvoline premium blue) , topping up the engine coolant, replacing of different old filters with new ones (Fleetguard Make), replacing of any faulty part like solenoid, starter switch etc. The job includes disassembling of fuel injector assemblies calibrating and cleaning them including cleaning of injector cups, servicing of the radiator assembly which involves cleaning/washing of the radiator, washing of the cylinder block from outside with diesel and kerosene, dhoti cloth etc. The job also includes checking of all fuel lines for free flow of fuel, coolant level, checking of Genset on full load in all respects, fan belts, hose, hose clips, replacement of distilled water for genset battery etc. The job includes cost of M-oil, coolant and all replaced filters and all other costs (Complete Job). |
| 18 | Repairing of double flanged type concentric butterfly valve by means of disassembling and replacing different parts of it with new ones like gear wheel, worm gear, stem, shaft, stem bearing, disc, pin, bushing, O-ring, seat, gland packing, retainer etc to make the butterfly valve fully functional in all respects. The job includes disassembling of sluice valve, reassembling after repairing of above mentioned worn out/damaged part, making temporary arrangements for valve in order to avoid disruption of water supply including all carriages up to workshop and back to site, charges of chain block/tripod arrangements if required for lifting and laying of valves etc. (Complete job).i. 800mm dia. butterfly valve |
| 19 | ii. 600mm dia. butterfly valve |
| 20 | Repairing of sluice by means of disassembling the sluice valve and replacing of worn out/damaged parts like spindle/stem/rod (made out of stainless steel), check nut (made out of gun metal), bonnet, dome, wedge, body seat ring, pinion and opinion shaft, gland packing, nuts and bolts etc. with new ones. The job includes disassembling of sluice valve, reassembling after repairing of above mentioned worn out/damaged part, making temporary arrangements for valve in order to avoid disruption of water supply including all carriages up to workshop and back to site, charges of chain block/tripod arrangements required for lifting and laying of sluice values etc. (Complete job).i. 500mm dia. sluice valve |
| 21 | i. 450mm dia. sluice valve |
| 22 | ii. 400mm dia. sluice valve |
| 23 | iii. 350mm dia. sluice valve |
| 24 | iv. 300mm dia. sluice valve |
| 25 | v. 250mm dia. sluice valve |
| 26 | vi. 200mm dia. sluice valve |
| 27 | vii. 150mm dia. sluice valve |
| 28 | 100mm dia. sluice valve |
| 29 | Decamping of main cable at Filtration Plants from LT poles, cutting of main cable by Hexa blades, providing / fixing of bone china insulators, thimbles, cost of PVC tape rolls, fuse wire, engagement of skilled/ non skilled labours, cost of rope, hire charges of long stair etc. complete job |
| 30 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed in All kinds of soil. |
| 31 | Earthwork in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres in All kinds of soil |
| 32 | Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material : |
| 33 | Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. |
| 34 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m & lift upto 1.5 m. |
| 35 | Supply and Filling of trenches by GSB / Nallah Muck from approved source including all carriages upto actual site of work. It shall not contain excessive quantity of loam. The item including ramming, consolidation in layers, charges of T&P, equipment’s etc. required for completion of job. |
| 36 | Supply and filling of 2nd class sand / stone dust around pipes at different spots from available approved source including all carriages, leads and lifts upto the site of work including spreading of stone dust, levelling dressing including compaction in all respects. Complete Job. |
| 37 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) |
| 38 | Centering and shuttering including strutting, propping etc. and removal of form for: i. Foundations, footings, bases of columns etc. for mass concrete. |
| 39 | ii. Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 40 | iii. Columns, pillars, piers, abutments, posts and struts. |
| 41 | iv. Suspended floors, roofs, landings, balconies and access platforms. |
| 42 | v. Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 43 | vi. Stairs (excluding landings) except spiral staircases. |
| 44 | Providing and laying of dry stone soling in foundation/trenches hand packed and consolidated by hand ramming including all carriages upto site of work saddle/anchor/thrust blocks. |
| 45 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: i. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 46 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level.i. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 47 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: i. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) |
| 48 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. i. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 49 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with i. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 50 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. TMT bars of grade Fe-500D or more. |
| 51 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : i. Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 52 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level up to floor five level. |
| 53 | Cement Plaster (In Fine Sand) 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 54 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc. upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. i. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 55 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete for 50 mm thick with 20mm nominal size stone aggregate |
| 56 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead for thickness of tiles above 25 mm and upto 40 mm. |
| 57 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS:15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. i. In colour such as White, Ivory, Grey, Fume Red Brown. |
| 58 | ii. In all colours, shades, except White, Ivory, Fume Red Brown. |
| 59 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. completei. Size of tile 600x600 mm |
| 60 | Supply/providing of M.S fittings viz bends of suitable degrees / size to be fabricated out of 8mm to 10mm thick MS. plate as per the requirement of site. The fittings should be painted with Anticorrosive Red Oxide Primer and is incld. all carriages, leads lifts, etc. complete. |
| 61 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 meters lead. |
| 62 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. i. Welded. |
| 63 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 64 | Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 65 | Providing and fixing of Electrical points (heating and lighting) incld. cost of wire switches, necessary MCB’s switch boards, ceiling roses reputed make ISI mark screws, casing / conduit materials of all sorts of carriage and labour charges required for the complete job. i. Lighting points |
| 66 | ii. Heating points |
| 67 | Supply of 20W LED Bulbs for filtration plant sites etc. |
| 68 | Supply of pipe specials from open market, if not available in the Divisional stores Make of NIKE; NEW, UNIK or equivalent.i. 25 mm dia G.I. Union |
| 69 | i. 20 mm dia G.I. Union |
| 70 | ii. 25 mm dia G.I. Elbow |
| 71 | iii. 20 mm dia G.I. Elbow |
| 72 | iv. 25 mm dia G.I. Socket |
| 73 | v. 20 mm dia G.I. Socket |
| 74 | vi. 25 mm dia G.I. Nipple upto 10\\" |
| 75 | 20 mm dia G.I. Nipple upto 10\\" |
| 76 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 77 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 78 | White washing with lime to give an even shade : i. Old work (two or more coats) |
| 79 | ii. Old work (one or more coats) |
| 80 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on old work (one or more coats) |
| 81 | Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. |
| 82 | Finishing walls with water proofing cement paint of required shade: i. Old work (one or more coats applied @ 2.20 kg/10sqm) over priming coat of primer applied @ 0.80 liters/10sqm complete including cost of priming coat. |
| 83 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work. |
| 84 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 85 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete i. On steel work |
| 86 | ii. On concrete work |
| 87 | Painting with oil type wood preservative of approved brand and manufacture on old work (one or more coats) |
| 88 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead |
| 89 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: i. In cement mortar |
| 90 | Supply and fixing of PVC gate valves for bleaching / alum tanks/ Foot valves and PVC pipes (Standard make).i. 20 mm dia. Gate valve |
| 91 | i. 25 mm dia. Gate valve |
| 92 | ii. 32 mm dia. Gate valve |
| 93 | iii. 40 mm dia. Gate valve |
| 94 | iv. 50 mm dia. Gate valve |
| 95 | v. 20 mm dia. PVC pipe (B-class) |
| 96 | vi. 25 mm dia. PVC pipe (B-class) |
| 97 | vii. 32 mm dia. PVC pipe (B-class) |
| 98 | viii. 40 mm dia. PVC pipe (B-class) |
| 99 | 50 mm dia. PVC pipe (B-class) |
| 100 | Supply and fixing of C.I/D.I. Gate valves/ Sluice valve/butterfly valve by providing / fixing of new Gate valves/ Sluice valve of Reputed make like Vag/ Talis/ Kirloskar/ Zoloto/ AVK or any equivalent as per approval of Engineer In-charge etc. including cost of nuts, bolts, rubber insulations all carriages and taxes upto site of work, complete.i. 800 mm dia. Butterfly valve with gear. |
| 101 | i. 600 mm dia. Butterfly valve with gear |
| 102 | ii. 500 mm dia. Sluice valve with gear |
| 103 | iii. 450 mm dia. Sluice valve with gear |
| 104 | iv. 400 mm dia. Sluice valve |
| 105 | v. 350 mm dia. Sluice valve |
| 106 | vi. 300 mm dia. Sluice valve |
| 107 | vii. 250 mm dia. Sluice valve |
| 108 | viii. 200 mm dia. Sluice valve |
| 109 | ix. 150 mm dia. Sluice valve |
| 110 | 100 mm dia. Sluice valve |
| 111 | Repairing/Replacement by means of providing and fixing stainless steel (Grade 304) railing/grills made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 112 | Welding of all types (electric arc welding, gas welding), hire charges of skilled welder, welding machine, oxy-acetylene apparatus, cutter & genset mounted on tata mobile including all fuel charges for in-situ welding, cutting, fixing and of materials/collars/ bends etc. to the required shape, size & degree. This item includes all welding equipments/ accessories. (Complete Job). |
| 113 | Providing refreshment to supervisory staff & departmental labour for prolonged/continuous operation of repair/ restoration/ maintenance work of pipelines. Complete job including packing with following Menu.i. Water Bottle One litre |
| 114 | i. Water Bottle 500 ml |
| 115 | Water bottle 250 ml |
| 116 | iv. Juice pack/ tin 100 ml to 180 ml of Standard Quality |
| 117 | i. Boiled Egg/Omelete |
| 118 | ii. Biscuit standard Quality of 50g |
| 119 | iii. Banana |
| 120 | iv. Butter Toasts each pair |
| 121 | v. Toasts without Butter each pair |
| 122 | vi. Tea wih sugar each Cup |
| 123 | vii. Tea Namkeen each Cup |
| 124 | xii. Normal one piece Chicken Biryani box for each person |
| 125 | xiii. Rice Plate with one cooked vegetable and single piece of mutton. |
| 126 | Carriage of material from divisional store up to dumping site of work, including loading, unloading and stacking etc. complete by Mechanical Transport.i. Cement & steel, G.I/C.I pipe avg. lead upto 01 Kms. |
| 127 | ii. Cement & steel, G.I/C.I pipe avg. lead upto 02 Kms. |
| 128 | iii. Cement & steel, G.I/C.I pipe avg. lead upto 03 Kms. |
| 129 | iv. Cement & steel, G.I/C.I pipe avg. lead upto 04 Kms. |
| 130 | v. Cement & steel, G.I/C.I pipe avg. lead upto 05 Kms. |
| 131 | vi. Cement & steel, G.I/C.I pipe avg. lead beyond 5 Kms upto 10 Kms (per Km). |
| 132 | vii. Cement & steel, G.I/C.I pipe avg. lead beyond 10 Kms upto 20 Kms (per Km). |
| 133 | viii. Cement & steel, G.I/C.I pipe avg. lead beyond 20 Kms per additional Km. |
| 134 | ix. Sand & Agg. 20 mm avg. lead of upto 01 Kms. |
| 135 | x. Sand & Agg. 20 mm avg. lead upto 02 Kms. |
| 136 | xi. Sand & Agg. 20 mm avg. lead upto 03 Kms. |
| 137 | xii. Sand & Agg. 20 mm avg. lead upto 04 Kms. |
| 138 | xiii. Sand & Agg. 20 mm avg. lead upto 05 Kms. |
| 139 | xiv. Sand & Agg. 20 mm avg. lead beyond 5 Kms upto 10 Kms (per Km). |
| 140 | xv. Sand & Agg. 20 mm avg. lead beyond 10 Kms upto 20 Kms (per Km) |
| 141 | xvi. Sand & Agg. 20 mm avg. lead beyond 20 Kms per additional Km. |
| 142 | i. 40 mm Agg. avg. lead of upto 01 Km. |
| 143 | ii. 40 mm Agg. avg. lead upto 2 Kms. |
| 144 | iii. 40 mm Agg. avg. lead upto 3 Kms. |
| 145 | iv. 40 mm Agg. avg. lead upto 4 Kms. |
| 146 | 40 mm Agg. avg. lead upto 5 Kms. |
| 147 | xxii. 40 mm Agg. avg. lead beyond 05 Kms upto 10 Kms (per Km). |
| 148 | xxiii. 40 mm Agg. avg. lead beyond 10 Kms upto 20 Kms (per Km). |
| 149 | xxiv. 40 mm Agg. avg. lead beyond 20 Kms per additional Km. |
| 150 | i. Stone soling avg. lead of upto 1 Km. |
| 151 | ii. Stone soling avg. lead upto 2 Kms. |
| 152 | iii. Stone soling avg. lead upto 3 Kms. |
| 153 | iv. Stone soling avg. lead upto 4 Kms. |
| 154 | v. Stone soling avg. lead upto 5 Kms. |
| 155 | xxx. Stone soling avg. lead beyond 05 Kms upto 10 Kms (per Km) |
| 156 | xxxi. Stone soling avg. lead beyond 10 Kms upto 20 Kms (per Km) |
| 157 | xxxii. Stone soling avg. lead beyond 20 Kms per additional Km |
| 158 | Carriage of material from dumping site to actual site of work, including loading, unloading and stacking etc. complete by manual labour.i. Cement for an avg. lead upto 50 mtr. |
| 159 | ii. Cement for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs. |
| 160 | iii. Steel for an avg. lead upto 50 Mtr. |
| 161 | iv. Steel for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs. |
| 162 | v. Pipe for an avg. lead upto 50 Mtr. |
| 163 | vi. Pipe for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs. |
| 164 | vii. Soling for an avg. lead upto 50 Mtr. |
| 165 | viii. Soling for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs. |
| 166 | ix. Sand & Agg. 20mm for an avg. lead upto 50 Mtr |
| 167 | x. Sand & Agg.20mm for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs. |
| 168 | xi. 40mm Agg. for an avg. lead upto 50 Mtr. |
| 169 | xii. 40mm Agg. for an every additional lead of 50Mtrs or part thereof beyond 1st 50 mtrs. |
| 170 | Clearing snow (without frost) from roads manually.i. Snow depth upto 150 mm. |
| 171 | ii. Snow depth over 150 mm but upto 250mm. |
| 172 | iii. Snow depth over 250 mm but upto 350mm. |
| 173 | iv. Snow depth over 350 mm but upto 450mm. |
| 174 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: i. Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 175 | Dry random rubble masonry with hard stone in foundation and plinth: i. With bond stone |
| 176 | Providing and fixing of 10 ltr capacity flushing cistern including necessary screws etc. complete job |
| 177 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. |
| 178 | Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same inAll kinds of soil. |
| 179 | Providing fixing & commissioning of LED Flood Lights of 50 Watts with stand including all accessories required at site complete job inclusive all carriages. |
| 180 | Providing & fixing of PPR Pipes complete excluding earth work.i. 25mm dia. |
| 181 | i. 32mm dia. |
| 182 | ii. 50mm dia. |
| 183 | 110mm dia. |
| 184 | Providing and fixing of Hi Rib profile roofing sheets high tensile SMP galvanised steel to be measured and paid in fixed position. (Tata or equivalent ISI Marked) |
| 185 | Providing and fixing of Geysers of standard make including bolts etc.i. 25 Ltr. capacity. |
| 186 | ii. 50 Ltr. capacity. |
| 187 | Supply of lead, spun Yarn, Fire Wood Kerosene including all carriages upto site of work.i. Lead |
| 188 | i. Spun Yarn |
| 189 | ii. Fire Wood |
| 190 | Kerosene |
| 191 | Providing lead caulked joints to spun iron or C.I. pipes and specials including testing of joints but excluding the cost of pig lead.i. 100 mm dia. pipe |
| 192 | i. 125 mm dia. pipe |
| 193 | ii. 150 mm dia. pipe |
| 194 | iii. 200 mm dia. pipe |
| 195 | iv. 250 mm dia. pipe |
| 196 | v. 300 mm dia. pipe |
| 197 | vi. 350 mm dia. pipe |
| 198 | vii. 400 mm dia. Pipe |
| 199 | viii. 450 mm dia. pipe |
| 200 | ix. 500 mm dia. pipe |
| 201 | x. 600 mm dia. Pip |
| 202 | 800 mm dia. Pipe |
| 203 | Complete servicing work of AC of capacity including refilling of gas, changing of any faulty part etc. complete job.1.5 Ton |
| 204 | 2.0 Ton |
| 205 | Supply of:i. Labour |
| 206 | i. Fitter |
| 207 | ii. Motor Mechanic |
| 208 | iii. Electrician |
| 209 | iv. Carpenter |
| 210 | v. Mason |
| 211 | vi. Gardener |
| 212 | Providing and fixing of following items at 10MGD WTP and 3.33MG Service Reservoir including all taxes and carriages upto site:i. 150 Ah tall tubular battery of standard make like Exide, Luminous, Amaron, Livguard etc including fixing with required cables/connectors etc. complete. |
| 213 | ii. Rechargeable LED Torch 4 Watt of Andslite ranger make including all taxes |
| 214 | i. Shovels of ISI marked Tata make. |
| 215 | ii. Pick axe of standard make. |
| 216 | iii. Spade of standard make. |
| 217 | iv. Rake (Panja) of standard make. |
| 218 | vii. Hand-Wheels of different sizes for operating sluice valves at plant. |
| 219 | viii. Heavy Duty Wrenches of different sizes, ISI Marked Taparia make conforming to IS 4003 PartII-1986:ix. 12 inches |
| 220 | i. 18 inches |
| 221 | ii. 24 inches |
| 222 | 36 inches |
| 223 | xiii. 12mm thick EPE foam of standard make. |
| 224 | xiv. Versa type matting of standard make. |
| 225 | xv. Razai/Mattress with covers |
| 226 | xvi. Mink Blanket of standard make. |
| 227 | xvii. Portable Mobile Gas Heater/Bukhari of reputed make for Indoor use having Piezo Ignition with maximum heating capacity 4.2kW without LPG Cylinder. |
| 228 | xviii. 20.5 feet A-Type Portable and Foldable Aluminium Telescopic Ladder of reputed make constructed from high-grade 6063 T5 aluminium alloy with 1.5mm thickness and 150 kg load carrying capacity. |
| 229 | xix. 3 Burner LPG Cooktop of reputed make with High Powered Brass Burner and Glass Top with Powder Coated Black Body having Manual Ignition. |
| 230 | xx. 1400 to 1600 Watt Electric Bush Cutter with bike type handle, 380mm Cutting Width, Heavy-Duty Copper Winding Motor, 1ft Wire Length, minimum 6-Month Manufacturer Warranty. |
| 231 | xxi. 2500W Electric Lawn Mower, with 20 to 24 inch Blade, 3 to 3.5 HP Copper Motor, with adjustable cutting heights, 50-70L Grass Box, Heavy-Duty. |
| 232 | xxii. Long Gumboots of reputed quality like duckback or equivalent |
| 233 | xxiii. Rubber Slippers of standard make and of required size |
| 234 | xxiv. Rain coats of reputed quality like duckback or equivalent |
| 235 | xxv. 2.5mm single core wire, fire resistant, PVC insulated pure copper wire. |
| 236 | xxvi. Pedestal Fan of 400mm sweep size ISI marked with copper motor of reputed make in fitted and working form. |
| 237 | xxvii. CCTV camera setup having 8 cameras of 5MP 1080p having colour vision in Night with 2TB HDD, 8 Channel HD DVR Power Supply, 90 meter cable and all necessary connectors in complete fitted and working form (complete job). |
| 238 | xxviii. Internet fiber Wi-Fi router and installation having up to 40 MBPS unlimited data with 1 year advance cost/payment complete fitted and working form (complete job) including GST. |
| 239 | xxix. Ceiling Fan of 1200mm sweep size ISI marked with copper motor of reputed make in fitted and working form. |
| 240 | Maintenance & repairs to solar photo voltaic panels (SVP=1 No.), LED luminaries (1 No.), 150/120 Ah battery (1 No.), charging controller (12/24 volt 10/20 Amp), 2.5 sq.mm wires etc. to keep the lighting system fully functional. The item includes supply/filling of gravity acid 12.60% (Distilled Water) for lead-acid batteries including all carriages up to the sites, emptying the batteries of old gravity acid, disposing it in a safe manner, cleaning of batteries and refilling of batteries with new gravity acid (distilled water) using required funnel, dropper, boost charging of batteries with generator as power supply at the sites is not available, hire charges of generator, operator, fuel, all carriages up to sites and back to the service provider, replacing of worn out wires/connectors/cables etc. as per the requirement of site. (Complete Job). |
| 241 | Providing and fixing of 35mm thick glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. i. Second class kail wood |
| 242 | Providing and fixing of 35mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : i. Second class Kail wood |
| 243 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. i. 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 244 | Renewing glass panes, with putty and nails wherever necessary including raking out old putty : a. Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm) |
| 245 | b. Float glass panes of thickness 5.0 mm(weight not less than 12.5 kg/sqm) |
| 246 | Renewing glass panes, with wooden fillets wherever necessary : a. Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) |
| 247 | b. Float glass panes of thickness 5.0 mm (weight not less than 12.5 kg/sqm) |
| 248 | Unloading chemicals (Alum or Bleaching) by manual means from trenches and carrying the same into chemical store including stacking the same properly in rows upto any height as per the direction of Engineer Incharge, sweeping the vehicles/floor. |
| 249 | Providing of outdoor plastic chair of size 35”x24”x30” having arm rests of standard make like Nilkamal, prime etc. including all carriages to site. |
| 250 | Providing of outdoor plastic table having size 45”x28”x30” of standard make like Nilkamal, prime etc including all carriages to site. |
| 251 | Providing and fixing of superior type tent including interior furnishing, carpet etc. on rent basis including loading, unloading and all carriages up to site and back. (complete job) |
| 252 | Providing & installation of Flex Banners with hollow MS Tubular frame with the texts & images printed as per the directions of Engineer In-charge complete Job. |
| 253 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts,bolts and washers as required complete as per the direction of Engineer-in-charge. i. Made of G.I. wire of dia 4 mm |
| 254 | Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive. |
| 255 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar |
| 256 | Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m. (stacks of cleaned bricks shall be measured) : From brick work in cement mortar |
| 257 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot &double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). |
| 258 | Providing, fixing incl testing and commissioning of Electrical materials with all sorts of carriage and labour charges required for job.(as per directions of Engineer in charge)i. Suitable feeder panel with cable alley |
| 259 | 150A 4P MCCB 36(KA (incomer) |
| 260 | Red Gen Next pro LED indicator 22.5mm voltage 240V AC |
| 261 | Blue Gen Next pro LED indicator 22.5mm voltage 240V AC |
| 262 | Yellow Gen Next pro LED indicator 22.5mm voltage 240V AC |
| 263 | 6A P 10KVA C-Curve MCB Type SB-201 MC |
| 264 | Aluminium Bus Bar for outgoing (Current density 0.8A/sqmm |
| 265 | 50sqmm Bus bar Type terminal Blocks with locking nut for incommer |
| 266 | End plate for incommer |
| 267 | 16SQMM TB for outgoing |
| 268 | End plate for outgoing Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 31, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender