Tender For Construction Of New 10000 Ltr Oht Tank In Melpalur Adc At Melpalur Panchayat
Tender Value
6.40 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
15 days left
EMD
16000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruvannamalai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of New 10000 Ltr Oht Tank In Melpalur Adc At Melpalur Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | Construction of New 10000 Ltr OHT Tank in Melpalur ADC at Melpalur Panchayat |
| 2 | Earth work excavation below G.L. and depositing on bank within an initial lead of 10.00 m and an initial lift of 2.00 for the following classification of soil |
| 3 | PCC 1:4:8 using 40mm HBG metal including mixing curing etc.,below 1.50 m from GL. |
| 4 | RCC in M 30 Design mix using10mm& 20mm size HBG metal excluding cost of reinforcement and centering but including cost of mixing, laying, curing, finishing etc.complete Below 1.5m from GL |
| 5 | 0m to 1.50m below GL |
| 6 | 0m to 4.50m above GL |
| 7 | 4.50 m to 7.32 m above GL |
| 8 | 7.32 m to 10.98 m above GL |
| 9 | Steel Centering, soffits of RCC works including strutting and shuttertting Charges etc. Below GL |
| 10 | From GL to 3.30m |
| 11 | From 3.30m to 4.30m above GL |
| 12 | From 6.30m to 7.30m |
| 13 | Square Column Below GL and upto 3.30m above GL |
| 14 | 3.31m to 4.30m ht |
| 15 | 4.31m to 5.30m ht |
| 16 | 5.31m to 6.30m ht |
| 17 | 6.31m to 7.30m ht |
| 18 | Curved Surface - upto 7.3m-7.65m |
| 19 | Curved Surface - upto 7.3m-8.3m |
| 20 | Curved Surface - upto 8.3m-9.3m |
| 21 | Curved Surface - upto 9.3m-10.3 |
| 22 | Supply, fabrication, placing in position of steel rods cutting tying etc. complete including cost of reinforcement RTS rods. |
| 23 | Painting two coats of newly plastered wall surface with two coat of Cement paint of approved colour over a Priming Coat including thorough scrapping ,plaster of paris ,putty clean removal of dirt and including necessary wherever required etc, complete complying with standard specification(including primer).For OUTER WALL Surface. |
| 24 | Providing M.S Ladder of 45cm wide made out of 50x50x6mm MS angle for sides and steps in 16mm MS plain rods fixed at 30 cm centre to centre etc as per approved design |
| 25 | Providing and fixing of RCC inner access ladder in RCC 1:1.5:3 (One cement, one and half sand and three aggregates) using 20mm HBG stone for OHT including cost of reinforcement, placing grill in position, centering shuttering charges, mixing concrete curing etc complete |
| 26 | Providing 110mm AC vent cowl arrangements mosquito proof nylon net and as directed by TWAD Board officers |
| 27 | Providing cut stone slab in CM 1:3 of size 0.3 m x 0.3 m x 0.15 m and as directed by TWAD Board officers |
| 28 | Providing manhole cover of size 0.60 x 0.60M in RCC 1:1.5:3 with suitable reinforcement and 50x50x6mm MS angle fixed along edges and as directed by TWAD Board officers |
| 29 | Provision for pipe connection arrangements for inlet, outlet scour and overflow etc. including cost of pipes, specials, valve, labour charge for lifting, aligning, cutting, threading, fixing and painting of GI pipes with two coats of approved quality enam 50mm dia GI pipes inlet and scour (12+8) |
| 30 | 50mm dia GI pipes over flow (8) |
| 31 | 65mm dia GI pipes out let (7.50+4.5m) |
| 32 | 50mm dia GM gate valve |
| 33 | 65mm dia GM gate valve |
| 34 | 63mm dia PVC Threaded coupler |
| 35 | 50mm dia GI Tee |
| 36 | 50mm dia GI Elbow |
| 37 | 50mm dia GM gate valve |
| 38 | 50mm dia GI Coupler |
| 39 | 50mm dia GI Flangeset |
| 40 | 50mm dia GI Coupling |
| 41 | 50mm dia GI Dummy |
| 42 | 50mm dia GI bend |
| 43 | 50mm dia GI union |
| 44 | 65mm dia GI union |
| 45 | 65mm dia GI Flangeset |
| 46 | 65mm dia GI Coupler |
| 47 | 63 mm PVC 4Ksc Pipe |
| 48 | Providing Hand rails over the Roof slab by using 32 mm GI Pipe with 40mm x 6mm MS Flat and fixied with 12mm dia Fastner Bolt 75mm long and as directed by TWAD Bd officers |
| 49 | Labour charges for GI pipe connection to the OHT, for inlet, outlet, overflow and scour arrangements including cutting and threading, earth work excavation & refilling. |
| 50 | GST Amount for providing Service to Government Contract Works for the above Construction Works. {GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender